HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

光纤激光传感技术及其应用

超高灵敏度的信号探测在石油勘探、地震预报和安全监测等领域都具有重要的应用价值.近年来出现了一种以分布反馈(DFB)光纤激光器为传感元件的新一代光纤传感器,它具有尺寸小、输出激光信号极窄的光谱线宽和极低的噪声等优势,与高分辨率波长解调技术结合可以达到极高的探测灵敏度.介绍了在光纤激光传感技术及其应用技术方面的研究进展,包括线宽仅为3 kHz、尺寸仅为3.6 cm的窄线宽低噪声DFB光纤激光器的研制及其测试,波长分辨率达3.5×10~(-7) pm/Hz~(1/2)的超高分辨率波长解调系统,基于密集波分复用的光纤激光传感网络,以及相关技术在水声和地震波探测中的应用研究.     

金属基底增敏的干涉型高温光纤传感器

为了实现对井下潜油电泵机组温度的实时监测,设计了一种由粗锥型单模--多模--单模(Coarse Cone Singlemode-Multimode-Singlemode, CCSMS)构成的马赫--曾德尔干涉(Mach-Zehnder Interferometer, MZI)型高温光纤传感器。该结构采用直接熔接的方法将单模光纤与多模光纤相熔接;接着通过调整熔接机的熔接参数,在单模光纤上制作出粗锥结构;最后将制备的结构嵌入铜基板的U型槽中,实现传感器的增敏封装。对封装后的传感器的温度响应特性进行了测试。实验结果表明,在40～250℃的温度范围内,该传感器实现了灵敏度为124.9 pm/℃的温度传感。对其稳定性和重复性进行了测试。结果表明,传感器的稳定性最大误差约为0.44%,重复性最大误差约为2.29 pm/℃。该传感器具有灵敏度高、重复性和稳定性好的特点,有望用于油气井下潜油电泵机组的温度监测。     

激射波长和泵浦波长对掺Yb~(3+)双包层光纤激光器的影响

为探讨激射波长和泵浦波长对掺Yb3+双包层光纤激光器的影响,数值模拟了泵浦波长为975nm和915nm,激射波长在1050nm至1120nm范围变化时,掺Yb3+双包层光纤激光器的输出特性.结果表明,当泵浦波长为975nm,激射波长在1088nm左右,以及泵浦波长为915nm时,激射波长在1080nm左右时,双向泵浦和反向泵浦的掺Yb3+双包层光纤激光器输出功率达到最大值.与915nm的泵浦源相比,利用975nm泵浦可使泵浦阈值功率降低以及获得更高的激光翰出功率.泵浦波长为975nm和915nm时,激射波长在1090nm附近,阈值功率达到最低值.所得的结果对激光器的优化设计具有重要意义.     

光纤耦合数码系统传像特性

建立了光纤传像元件与光电阵列器件的匹配耦合模型,引入变动因子反映像素光纤排列的不确定性,进行了光纤耦合传像特性的仿真研究.针对9×9 μm2光敏元的阵列器件,分析了光纤传像元件结构参数变化对系统分辨率的影响,在光纤直径约为光敏元尺寸1/3时获得了相对经济合理的匹配结构,表明光纤耦合数码系统设计时必须考虑优化匹配问题.仿真结果还解释了系统的图像输出存在条纹和局部结构背景的原因,给出了相应的数值分析方法.     

光纤臂长差对马赫-曾德尔型光纤陀螺的影响

介绍了基于马赫-曾德尔干涉原理和萨格奈克(Sagnac)效应的马赫-曾德尔型光纤陀螺(MZ型光纤陀螺)的工作原理.在此基础上,分析了两光纤臂长差对光纤陀螺零位漂移和温度稳定性的影响,指出臂长差的存在是影响MZ型光纤陀螺系统稳定性和灵敏度的最主要因素.     

Modified null field method for P- and SV-wave scattering from a partially debonded fiber

The modified null field approach to elastic P- and SV-wave scattering (in plane strain) from a partially debonded fiber has been developed. The debonded region on the fiber surface is subjected to traction free boundary conditions, whereas the fiber is assumed to be in welded contact with the host medium elsewhere. Additional null field equations for an elliptical extension of the actual surface of the scatterer are introduced which require additional expansions for the field in the region between the extended mathematical boundary and the actual boundary of the scatterer. The numerical accuracy of the modified null field method has been tested for the case of a perfectly bonded fiber for P- and SV-wave incidence. Scattering cross-section plots are presented for different degrees of debonding.     

Dynamics of the Up-Conversion Emission in Holmium Doped Zblan Fiber

The dynamics of up-conversion, green emission under excitation at different infra-red wavelength in Ho^3? doped ZBLAN fiber is reported. Under infrared, 890 nm quasi cw pumping the complicated temporal behavior of the up-conversion signal is strongly influenced by the intermediate ⁵I₅ state cross relaxation. The mechanisms of the observed up-conversion processes are proposed and the time evolution of the ⁵S₂ population is described by the rate equation model. Parameters of the model are determined and numerical simulations of the excited state dynamics are performed.     

铁通公司FTTH发展与建设思考

本文从FTTH发展思路、应用场景、建设模式等方面进行阐述,并对铁通公司FTTH下一步发展提出4点建议。     

Anti‐static Agent Containing Zinc Oxide and its Modification for PA6 Fiber

A new anti‐static agent was synthesized from zinc oxide‐adipic acid‐polyethylene glycol and caprolactam by three‐step reactions. The antistatic agent (called poly(ether ester amide zinc oxide) or PEEAZ) was analyzed by IR and DSC. The results showed that zinc oxide existed in the main chain of PEEAZ. The glass temperature and melt temperature of poly(ether ester amide zinc oxide) (referred to as PEEAZ in the following) decreased with increasing poly(ether ester zinc oxide) increasing in PEEAZ. Antistatic PA6 fiber was obtained by adding PEEAZ 2–8% (wt/wt) to PA6 during blend spinning. The specific resistance and the static half‐value period of PA6 fiber was less than 10⁹Ω · cm and 60 sec, respectively. Excellent antistatic property remained after being washed 30 times.