Generation of entanglement via atomic coherence in a two-mode three-level cascade atomic system

The generation of continuous variable entanglement via atomic coherence in a two-mode three-level cascade atomic system is discussed according to the entanglement criterion proposed by Duan et al. [Phys. Rev. Lett. 84, 2722 (2000)]. Atomic coherence between the top and bottom levels is induced with two photons of a strong external pump field. It shows that entanglement for the two-mode field in the cavity can be generated under certain conditions. Moreover, by means of the input-output theory, we show that the two-mode entanglement could also be approached at the output.     

Increased conversion efficiency in cadmium telluride photovoltaics by luminescent downshifting with quantum dot/poly(methyl methacrylate) films

Commercially available quantum dots have been encapsulated in a poly(methyl methacrylate) film and used as a luminescent downshifting layer on cadmium sulfide/cadmium telluride photovoltaic devices. Application of these films has resulted in a relative improvement to the short‐circuit current of over 4% by I–V measurement, with a significant increase in the contribution of short‐wavelength light resulting in 25% of the current available in this part of the spectrum being captured. The films have been shown to be highly scattering and the associated difficulties this provides to external quantum efficiency measurements have been discussed. A range of optical characterisation techniques, particularly laser beam induced current, have been used to probe the effect the films have on a cadmium sulfide/cadmium telluride device. An alternate methodology for performing external quantum efficiency measurements with the quantum dot films has been proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

NaN_3对玉米萌发过程中超弱光子辐射的影响

为了解读植物种子萌发过程中超弱光子辐射信息的生物学意义,采用呼吸抑制剂NaN3处理萌发玉米种子,跟踪测量和分析了玉米种子萌发过程中超弱光子辐射中自发光子辐射和外界光诱导的延迟光子辐射的变化规律,同时研究了萌发玉米种子鲜质量的变化.结果发现,NaN3同步抑制了萌发玉米自发光子辐射和鲜质量的增长,造成萌发玉米延迟光子辐射的初始光子数和延迟光子辐射积分强度大幅度降低,相干时间减小.机理分析表明,NaN3对呼吸代谢电子传递链的抑制造成的自由基反应减弱是萌发玉米自发光子辐射减小的原因,自发光子辐射强度可以作为玉米萌发状态的信号,延迟光子辐射动力学参数的大小可以表征萌发玉米呼吸代谢的强弱,相干时间是种子细胞组织序性的量度,通过对萌发种子超弱光子辐射的采集和分析可以实现对萌发种子细胞代谢和功能状态变化的灵敏和无损检测.     

利用多像素光子计数器的光学串话效应提高光子探测效率

通过分析多像素光子计数器(MPPC)的工作原理和其光学串话(OC)效应的特点,提出在使用MPPC输出雪崩信号的幅度或电荷量作为光子计数的参量时,利用MPPC的OC效应能提高MPPC的光子探测效率的观点,并从理论上分析了OC效应对光子探测效率的影响。理论分析结果显示,在这两种光子计数模式下,利用OC效应能明显提高MPPC的光子探测效率。利用本文模型计算得出当MPPC的雪崩单元数M为1 600个,忽略OC效应时的光子探测效率等于30%,光学串话概率等于50%,以及单脉冲入射光子数均值为10时,包含OC效应影响的等效光子探测效率可提高50%,达45%左右。该结果对MPPC在天体物理、粒子物理、荧光光谱探测等弱光探测场合的应用有一定指导意义。     

A Small‐Molecule FRET Reporter for the Real‐Time Visualization of Cell‐Surface Proteolytic Enzyme Functions

Real‐time imaging of cell‐surface‐associated proteolytic enzymes is critical to better understand their performances in both physiological and pathological processes. However, most current approaches are limited by their complexity and poor membrane‐anchoring properties. Herein, we have designed and synthesized a unique small‐molecule fluorescent probe, which combines the principles of passive exogenous membrane insertion and Förster resonance energy transfer (FRET) to image cell‐surface‐localized furin‐like convertase activities. The membrane‐associated furin‐like enzymatic cleavage of the peptide probe leads to an increased fluorescence intensity which was mainly localized on the plasma membrane of the furin‐expressed cells. This small‐molecule fluorescent probe may serve as a unique and reliable reporter for real‐time visualization of endogenous cell‐surfaceassociated proteolytic furin‐like enzyme functions in live cells and tissues using one‐photon and two‐photon microscopy.     

Engineering Sensitized Photon Upconversion Efficiency via Nanocrystal Wavefunction and Molecular Geometry

Triplet energy transfer from inorganic nanocrystals to molecular acceptors has attracted strong attention for high‐efficiency photon upconversion. Here we study this problem using CsPbBr₃ and CdSe nanocrystals as triplet donors and carboxylated anthracene isomers as acceptors. We find that the position of the carboxyl anchoring group on the molecule dictates the donor‐acceptor coupling to be either through‐bond or through‐space, while the relative strength of the two coupling pathways is controlled by the wavefunction leakage of nanocrystals that can be quantitatively tuned by nanocrystal sizes or shell thicknesses. By simultaneously engineering molecular geometry and nanocrystal wavefunction, energy transfer and photon upconversion efficiencies of a nanocrystal/molecule system can be improved by orders of magnitude.     

基于单光子计数激光雷达的Bayesian检测研究

在单光子计数激光雷达检测领域,目前的检测方法在低信噪比情况下虚警概率会增加,同时也无法适应噪声变化的问题。针对这些问题,提出了一种基于Bayesian的检测方法,该方法首先通过雷达方程估计回波信号光子数的范围,将其作为先验信息,而后结合二项分布建立了累计概率模型,基于Bayesian判决准则计算得到检测阈值,此阈值能够在检测概率与虚警概率中间择其平衡。这种方法不仅克服了低信噪比检测困难的情况,还减少了先验信息的获取难度。实验结果表明,对比固定阈值其虚警概率降低了10倍。对比“恒虚警”其检测概率提高了约20%。验证了方法具有良好的检测效果,具备一定的可操作性。     

芯片毛细管电泳荧光检测器灵敏度的研究

本文采用倒置荧光显微镜,以汞灯为激发光源,自行设计组装了芯片毛细管电泳荧光检测系统。以荧光素异硫氰酸酯(FITC)为检测对象,对双通道门控光子计数器、CH151型光子计数探测器、电荷耦合器件(CCD)三种荧光检测器的灵敏度进行了比较研究。根据芯片毛细管电泳图谱分析,FITC在双通道门控光子计数器、CH151型光子计数探测器、CCD三种检测器中的检出限(S/N=3)分别为7.0×10-10mol/L,1.2×10-9mol/L,3.2×10-8mol/L。进一步采用CH151型光子计数探测器和CCD两种较常用检测器,对FITC和荧光素、曙红和荧光素两组荧光试剂的分离及检测进行了研究。结果表明,使用CH151型光子计数探测器作为检测器,灵敏度高,基线稳定,信噪比高。     

用蒙特卡罗光子追迹方法分析闪光灯的结构设计

闪光灯反光罩结构设计的目标是使得所拍摄视场内的光能量分布尽量均衡。不同于基于几何光学理论的闪光灯计算和设计方法,采用了蒙特卡罗光子追迹法来分析闪光灯的结构设计。通过对照相机闪光灯几何结构的分析,引入余弦随机变量等方法,建立了闪光灯系统中光源、反光罩、菲涅耳透镜等部件的数学模型。先用蒙特卡罗光子追迹法模拟了单光子在闪光灯中飞行的各种可能状态,再通过产生大量光子仿真真实的情况。并对一个具体的闪光灯结构进行了计算,计算得到了光强和光子方向矢量在水平、垂直两个方向的投影角之间的分布曲线图。仿真结果符合设计要求并与实测曲线很接近,从而验证了蒙特卡罗光子追迹法在闪光灯结构设计中的可行性。