Synthesis and characterization of soluble polyimides containing trifluoromethyl groups in their backbone

A series of polyimides were synthesized from 2,2‐Bis(3,4‐dicarboxyphenyl)hexafluoropropane, 2,2‐bis(3‐amino‐4‐hydroxyphenyl)‐hexafluoropropane, and 4,4′‐oxydianiline by chemical imidization. The effects of the diamine ratios on the properties of the films were evaluated through the study of their thermal, electrical, and morphological properties. All the polymers exhibited better solubility in most of the organic solvents and hence were easily processable. Polyimides with more 2,2‐bis(3‐amino‐4‐hydroxyphenyl)‐hexafluoropropane exhibited better solubility and a low refractive index, which is highly desired for microelectronic applications. The dielectric constant and birefringence were strongly dependent on the fluorine content. With an increase in the fluorine substitution, both the dielectric constant and birefringence decreased. All the polymers exhibited high thermal stability (>400 °C). The absence of crystalline melting in differential scanning calorimetry and broad wide‐angle X‐ray diffraction patterns revealed the amorphous nature of the polymers, which was due to the presence of bulky CF₃ groups and hinged ether linkages of the diamine component. The residual stress values decreased with an increase in the 4,4′‐oxydianiline content, and the results were in agreement with the dielectric constant. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4303–4312, 2004     

Rheooptical investigation of the crystallization of poly(ethylene terephthalate) under tensile strain

The crystallization of poly(ethylene terephthalate) under uniaxial tensile strain at different extension rates was investigated with optical polarimetry in a temperature range between the glass-transition temperature and the quiescent crystallization temperature. The evolution of the optical properties of the polymer, including the turbidity, birefringence, and dichroism, were monitored simultaneously with the mechanical parameters. To complete the semicrystalline microstructure characterization of the polymer under strain, an online wide-angle X-ray diffraction (WAXD) technique was used in separate experiments, which were performed under the same thermomechanical conditions. For real-time measurements, a high-energy synchrotron radiation source was used. The optical properties provided information about both the crystalline and amorphous phases, whereas the WAXD patterns essentially gave information about the crystalline phase. The two experimental techniques were then used in a complementary way to characterize the semicrystalline microstructure. Significant deviations from the stress-optical rule were found. This was attributed to both transient effects and the appearance of crystallites, which consisted of highly oriented molecular segments that could contribute to the optical anisotropy but not necessarily to the stress. The behavior of the optical dichroism was found to be qualitatively different from that of the birefringence. The latter monotonically increased with the strain, whereas the former first increased with the strain, passed through a maximum, and then decreased to a steady-state value. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1915–1927, 2004     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Viscoelasticity and birefringence of polyisoprene

The complex Young's modulus, E^*(ω), and the complex strain-optical coefficient, O^*(ω), which is the ratio of the birefringence to the strain, were measured for polyisoprene (PIP) over a frequency range of 1 ～ 130 Hz and a temperature range of 22 ～ ?100°C. The imaginary part of O^*, O″, was positive at low frequencies and negative at high frequencies. The real part, O′, was always positive and showed a maximum. The complicated behavior of O^* could be understood by the assumption that E^* = E_R^* + E_G^* and O^* = C_RE_R^* + C_GE_G^*, where E_R^* and E_G^* were complex quantities and C_R and C_G were constants. The C_R value, equal to the ordinary stress-optical coefficient measured in the rubbery plateau zone, was 2.0 × 10^?9 Pa^?1. The C_G value, defined as the ratio O″/E″ in the glassy zone, was ?1.1 × 10^?11 Pa^?1. The E_G^*, which was the major component of E^* in the glassy zone, showed almost the same frequency dependence as that of polystyrene and polycarbonate. The E_R^*, which was dominant in the rubbery zone, was described well by the bead-spring theory. The temperature dependence of the E_G^* was stronger than that of the E_R^*. This difference caused the breakdown of the thermorheological simplicity for E^* and O^* around the glass-to-rubber transition zone. © 1995 John Wiley & Sons, Inc.     

Experimental study of the induced flow birefringence of a suspension of rigid particles at the transition from Couette flow to Taylor vortex flow

The flow birefringence induced in solutions of rigid particles is studied experimentally in the region of the axisymmetrical Taylor vortex flow which arises once the velocity gradient G in the annular gap of a conventional Couette cell reaches a critical value G _c .The measurements are performed for several values of G > G _c and for 10 radial observation points in the annular gap. Solutions of two types of rigid particles are investigated: the first is a suspension of flattened clay particles like bentonite, while the second contains rod-like particles of tobacco mosaic virus (TMV). The variations of the birefringence intensity n and of the extinction angle measured in the domain of the axisymmetrical flow show a different behavior according to the shape of the particle in solution. This fact is confirmed theoretically with a good agreement for the measurements performed with solutions of flat particles.     

Photoinduced Proton Transfer between Photoacid and pH‐Sensitive Dyes: Influence Factors and Application for Visible‐Light‐Responsive Rewritable Paper

Ink‐free printing based on rewritable paper is an efficient and environmental friendly way to reuse paper, protect resources, and save energy for sustainable development of human society. Among various kinds of rewritable media, light responsive rewritable paper (LRP) is one of the most popular research areas due to its clean and favorable noncontact writing. Visible light is more suitable for LRP for its superior penetration and much less damages to organic molecules than UV light. However, visible‐light‐responsive rewritable paper (VLRP) has only limited successes so far. Herein, a VLRP is newly designed and fabricated based on photoinduced proton transfer (PPT) between photoacid and pH‐sensitive dyes. Success of it is highly benefited from systematical investigation and in‐depth understanding on the key influence factors, such as concentration‐induced undesired isomerization, temperature, humidity, and light intensity, on the PPT and its inverse process. As‐prepared VLRP shows long‐awaited properties, such as, high color contrast and resolution, appropriate legible time of prints, excellent reversibility (>100 cycles), easiness to achieve multicolor prints, and agreeing well with environmental concept of green printing. In addition, study of influence factors on PPT in this work, to some extent, may also help people understand complex photocycle process in biosystem.     

Nanohybrid Materials with Tunable Birefringence via Cation Exchange in Polymer Films

In this work, a nanohybrid material based on a freestanding polymeric liquid crystal network capable of postmodification via cation exchange to tune birefringence is proposed. The smectic liquid crystal films can be infiltrated with a variety of cations, thereby changing the refractive indices (n_e and n_o) and the effective birefringence (Δn) of the nanohybrid material, with reversible cation infiltration occurring within minutes. Birefringence could be tuned between values of 0.06 and 0.19, depending on the cation infiltrated into the network. Upon infiltration, a decrease in the smectic layer spacing is found with layer contraction independent of the induced change in birefringence. Potential applications are in the field of specialty optical devices, such as flexible, retunable reflective filters.     

Orientational and electro-optical properties of liquid crystal aligned with a directly spinnable carbon nanotube web

We investigated the orientational and electro-optical properties of a nematic liquid crystal (LC) aligned with a directly spinnable carbon nanotube (CNT) web functioning both as an electrode and as an alignment layer. The LC molecules were uniformly oriented along the drawing direction of the CNT web and the spatially averaged birefringence was comparable to a rubbed polyimide sample. The CNT web sample also showed smaller residual DC and hysteresis compared to the polyimide sample.     

Virtual isotropic‐nematic transitions in alkyl cyanobiphenyls

Pretransitional fluctuations in the isotropic phase of liquid crystalline and non‐liquid crystalline alkyl cyanobiphenyls have been investigated using light scattering and magnetic birefringence measurements. We find evidence for a virtual isotropic‐nematic phase transition in short‐chain alkyl cyanobiphenyls with no observable nematic phase. The measured temperature dependence of fluctuations is well‐described by mean‐field theory. Virtual phase transition temperatures extrapolated from separate light scattering and magnetic birefringence experiments are in good agreement. Landau–de Gennes model parameters for the compounds investigated are calculated from the experimental results.     

Non‐symmetric bent‐core mesogens with one terminal vinyl group

Two series of non‐symmetric banana‐shaped compounds, both with one alkyl and one alkenyl terminal tail, have been synthesized and studied. Both series were compared with the corresponding series with two saturated terminal alkyl tails. All the compounds have a bent central 1,3‐phenylene bis(4‐benzoyloxy)benzoate core; their mesophases were characterized by polarizing optical microscopy, differential scanning calorimetry, X‐ray diffraction and switching current response experiments. In all four series one of the terminal tails is varied from OC₈H₁₇ to OC₁₆H₃₃. The other terminal tails are OC₁₁H₂₃, O(CH₂)₉CH?=?CH₂, OC₁₀H₂₁ and O(CH₂)₈CH?=?CH₂. The short‐tailed compounds show monotropic or enantiotropic B₁ phases and the long‐tailed compounds the B₂ phase. The introduction of one terminal vinyl group slightly lowers the transition temperatures. The introduction of a second terminal vinyl group further suppresses the liquid crystalline properties. All compounds with B₂ phases have layer spacings that suggest a tilt of ～45° of the bent molecules in the layers, and their switching behaviour is antiferroelectric.