Ultraviolet photoresponse of ZnO nanostructured AlGaN/GaN HEMTs

We present the first active visible blind ultraviolet (UV) photodetector based on zinc oxide (ZnO) nanostructured AlGaN/GaN high electron mobility transistors (HEMTs). The ZnO nanorods (NRs) are selectively grown on the gate area by using hydrothermal method. It is shown that ZnO nanorod (NR)-gated UV detectors exhibit much superior performance in terms of response speed and recovery time to those of seed-layer-gated detectors. It is also found that the best response speed (~10 and~190 ms) and responsivity (~1.1×10⁵ A/W) were observed from detectors of the shortest gate length of 2 µm among our NR-gated devices of three different gate dimensions, and this responsivity is about one order higher than the best performance of ZnO NR-based UV detectors reported to date.     

Biparametric multicommutated flow analysis system for determination of human serum phosphoesterase activity

A multicommutated flow analysis (MCFA) system constructed of microsolenoid valves and pumps offering simultaneous determination of activity of acid phosphatase (ACP) and alkaline phosphatase (ALP) in human serum samples has been developed. The MCFA system is based on optoelectronic flow-through detector made of two light emitting diodes and operating according to paired emitter detector diode (PEDD) principle. This photometric PEDD device has been dedicated for detection of p-nitrophenol (NP) generated in the course of enzymatic hydrolysis of p-nitrophenyl phosphate and optimized for the determination of NP in human serum samples. The developed PEDD-based MCFA system allows independent optimization of conditions for reaction and detection steps of photometric ACP and ALP bioassays. Moreover, it allows elimination of photometric interferences from serum matrix components according to two-points kinetic mode of measurement. The single measurement cycle takes 12 min, consists of four measurements (two for each phosphoesterase) and enables determination of serum ACP and ALP activities at physiological and pathological levels. The real analytical utility of the developed MCFA system has been confirmed by analysis of control sera as well as real human serum samples from healthy persons and oncological patients.     

Versatile wideband balanced detector for quantum optical homodyne tomography

We present a comprehensive theory and an easy to follow method for the design and construction of a wideband homodyne detector for time-domain quantum measurements. We show how one can evaluate the performance of a detector in a specific time-domain experiment based on the electronic spectral characteristic of that detector. We then present and characterize a high-performance detector constructed using inexpensive, commercially available components such as low-noise high-speed operational amplifiers and high-bandwidth photodiodes. Our detector shows linear behavior up to a level of over 13 dB clearance between shot noise and electronic noise, in the range from DC to 100 MHz. The detector can be used for measuring quantum optical field quadratures both in the continuous-wave and pulsed regimes with standard commercial mode-locked lasers.     

New relationship of displacement signal at quadrant photodiode: Control signal analysis and simulation of a laser tracker

New relationship of displacement signal using opposite sectors on a quadrant photodiode is derived. Standard and new displacement signals are analyzed in details. Through MATLAB^® laser tracking simulation models, based on common and suggested approaches, detailed analysis is performed, and it is shown that better results for the new relationship signal processing are obtained. Within new relationship of displacement signal, the sensitivity of the system to the displacement of the spot increases and, hence, provides better accuracy in positioning up to 30%.     

Development and validation of a RP-HPLC method for Roflumilast and its degradation products

Roflumilast is a phosphodiesterase type 4 inhibitor that is administered orally as a long-term, in the clinical treatment of chronic obstructive pulmonary disease and asthma. Launched in 2010 for the European market, it currently does not have an official monograph. Here, a reproducible gradient RP-HPLC method was developed and validated for the separation and determination of Roflumilast in the presence of its six major degradation products. Separation was performed on a C₁₈ analytical column (250?×?4.6?mm, 5?µm) with a mobile phase-A of ACN and a phase-B of ammonium acetate buffer (5?mM, pH 4.2) containing triethylamine (0.5% v/v). The most effective RP-HPLC gradient program was determined to be 0/80, 35/10, 36/80, 40/80 (time in minutes/% mobile phase-B). The flow rate was 1.0?ml/min and the column temperature was 25°C. The success of separation of the degradation products with different chemical characteristics was obtained by extending the time of the gradient, changing the proportion of the mobile phases and increasing the velocity of the flow. Two detectors were evaluated for the identification of degradation products and Roflumilast: a diode-arrary detector and a charged aerosol detector. The inability of the charged aerosol detector to dectect one of the six degradation products indicated that the method developed with RP-HPLC and the diode-array detector was more suitable for Roflumilast analysis. The method was validated according to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.     

Synchronization for IR‐UWB System Using a Switching Phase Detector‐Based Impulse Phase‐Locked Loop

Conventional synchronization algorithms for impulse radio require high‐speed sampling and a precise local clock. Here, a phase‐locked loop (PLL) scheme is introduced to acquire and track periodical impulses. The proposed impulse PLL (iPLL) is analyzed under an ideal Gaussian noise channel and multipath environment. The timing synchronization can be recovered directly from the locked frequency and phase. To make full use of the high harmonics of the received impulses efficiently in synchronization, the switching phase detector is applied in iPLL. It is capable of obtaining higher loop gain without a rise in timing errors. In different environments, simulations verify our analysis and show about one‐tenth of the root mean square errors of conventional impulse synchronizations. The developed iPLL prototype applied in a high‐speed ultra‐wideband transceiver shows its feasibility, low complexity, and high precision.     

A Practical Interfacing of HPLC with Electron Capture Detection (HPLC-ECD)

Abstract

Conventional HPLC can be simply, conveniently, and inexpensively interfaced to the electron capture detector within any GC. Various parameters have been evaluated to determine the suitability of this approach for the selective trace analysis of aliphatic and aromatic nitro derivatives.     

Stencil lithography of gold-black IR absorption coatings

Gold black coatings are deposited through a stencil shadow mask to produce infrared-absorbing patterns with sub-mm lateral dimensions. Such dimensions match the characteristic pitch of Long Wave Infrared (LWIR) array bolometers. Infrared spectral imaging with sub-micron spatial resolution reveals the spatial distribution of absorption across the pattern.     

基于现场可编程门阵列单探测器复合轴控制技术

为了解决空间激光通信系统中单探测器复合轴结构的粗精解耦难题,通过分析二维关联控制矩阵,得出粗精跟踪解耦的必要条件,提出了一种单探测器复合轴结构的工作方式.在跟踪过程中,相机直接配合子轴执行器完成精跟踪工作,而主轴的跟踪信息由子轴的角度偏转器来提供,同时所有的图像处理算法、位置检测算法、以及粗精伺服控制算法都在现场可编程门阵列中实现,完成了系统的轻小型化设计.实验搭建了测试系统,并对现场可编程门阵列硬件和系统跟踪性能进行测试,结果表明单探测器复合控制系统可以实现跟踪准确度优于3μrad,为工程化奠定了良好的基础.