高剂量率单次快脉冲辐射参量测量

记述了“强光一号”高剂量率脉冲辐射装置在状态调试过程中对其出射波形和辐射剂量进行监测的基本情况，实际监测的结果与设计方监测的结果进行了比对，双方的剂量监测值基本一致，偏差在20％以内；双方的波形形状十分相似，但测量得到的波形半宽度却相差10～20ns，最后对双方束流监测产生的差异进行了定性分析。     

Optical Spectroscopy and Theoretical Studies in Calixarene Chemistry

This review summarizes different applications of optical spectroscopic methods in calixarene chemistry including UV/Vis spectrometry, vibrational spectroscopic techniques (FTIR and Raman spectroscopy), luminescence spectroscopy (including fluorescence and phosphorescence), ellipsometry and various optical microscopic methods. Moreover, the results of theoretical studies (AM1, PM3, DFT, ab initio, etc.) are summarized based on selected papers in the field of conformational studies, thermodynamics and complexation features. About 300 references are processed systematically from the results reported mainly in the recent years with emphasis on the potential of practical application of these molecules.     

Basic principles of technological shaping of optical properties and radiation hardness of PWO crystals

Technological conditions ensuring growth of optically homogeneous lead tungstate (PWO) crystals are reported. It is shown that the basic scintillator characteristics of PWO grown from highly purified raw material and properly doped with lanthanides are mainly determined by inclusions of oxides W_1−yL_yO_3−x (L=Y, La, Gd; 0<x<0.3). Moreover, surface-located inclusions with structure close to tungstenite may also be of importance. It is demonstrated that the scintillation properties can be intentionally designed by varying the oxygen content in the inclusions x and the surface structure. The optimal value for x and the most favorable surface structure are achieved by proper thermal regimes and environment content during the crystal annealing. The results enabled low-cost fabrication of PWO scintillators with steady and reproducible characteristics acceptable for the CERN project ALICE and ensured production of PWO on an industrial scale by “North Crystals” company at a rate of 125–135 crystals per year from every growth apparatus.     

InAs/GaAs quantum dot infrared photodetectors with different growth temperatures

InAs/GaAs quantum dot infrared photodetectors were fabricated with quantum dots grown at three different temperatures. Large detection wavelength shift (5–14.5 μm) was demonstrated by changing 40 degrees of the epitaxy temperature. The smaller quantum dots grown at lower temperature generate 14.5 μm responses. The detectivity of the normal incident 15 μm QDIP at 77 K is 3 × 10⁸ cm Hz^1/2/W. A three-color detector was also demonstrated with quantum dots grown at medium temperature. The three-color detection comes from two groups of different sizes of dots within one QD layer. This new type of multicolor detector shows unique temperature tuning behavior that was never reported before.     

Morphology and spectral properties of thin films of benzoxazole derivatives of biphenyl

We have studied the spectral properties and morphology of thin films (TVD films) formed by thermal vacuum deposition of 4,4′-bis[(E)-1-(1,3-benzoxazol-2-yl)-2-ethenyl]-1,1′-biphenyl and its substituted derivatives. We have shown that introducing bulky 2,2′-oxyhexyl substituents into the biphenyl units leads to a shift of the fluorescence maximum for the TVD films toward shorter wavelengths, a decrease in their photostability, and aggregation of the films during storage. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 300–303, May–June, 2007.     

105K工作温度的多元长波光导碲镉汞探测器

文章报道了空间多光谱扫描仪红外波段多元光导碲镉汞探测器的研制与优值。重点研究并解决了多元器件光谱曲线不一致性的问题，简述了器件的优值波段响应率RΔλ1，波段探测率DΔλ和单色响应率Rλ的测试定标方法，以及器件按空间环境使用要求经历老炼和环境条件试验的情况。测试结果表明多元件性能稳定可靠，各项指标均达到了空间多光谱扫描仪的技术要求。     

激光诱导H_2S催化裂解制备H_2的研究

在室温常压静态条件下研究了以Ｖ２Ｏ５／ＴｉＯ２为催化剂，紫外脉冲激光诱导Ｈ２Ｓ催化分解为Ｈ２和Ｓ的反应及其机理。考察了产氢量与激光不同照射条件之间的关系。     

流延热释电厚膜陶瓷制备单元红外探测器

本文报道采用流延法制备的热释电厚膜陶瓷材料直接装配的单元红外探测器，该方法大大简化了目前探测器的制备工艺，极大地提高了材料的利用率，器件的性能也达到了目前探测器的水平。     

硒化铅光导型红外探测器的电极选择

本文主要介绍硒化铅光导型多元红外探测器的电极材料选择和电极的制备工艺。     

紫外可调谐辐射的波长自动跟踪研究

脉冲染料激光器的可见光波段辐射通过共线倍频和非共线混频实现紫外波段的连续可调谐输出.本文报道了一种闭环跟踪方法;在调谐起始波长处,将取样光束在垂直相位匹配方向分割成等光强的两部分,然后在波长调谐时比较和平衡这两部分光强.对该方法在理论上作了分析并在实验中得到成功的验证.获得的自动跟踪效率大于90%.