A Novel Environmentally Benign Method for the Selective Oxidation of Alcohols to Aldehydes and Ketones

In the presence of [Ru(terpyridine)(2,6‐pyridinedicarboxylate)], aliphatic and benzylic alcohols are oxidized to the corresponding aldehydes or ketones with high selectivity by using hydrogen peroxide as the oxidant. There is no need for the addition of co‐catalysts or organic solvents. By applying an optimized reaction protocol, high catalyst productivity (turnover number>10 000) and activity (turnover frequency up to 14 800 h^?1) has been achieved.     

Some features of RuCl3-catalyzed periodate oxidation of 3-N-substituted 5-allenyl-2,5-dichloro-4,4-dimethoxycyclopent-2-en-1-ones

3-N-Substituted 5-(1Z-carboxymethylene)-2-chloro-4,4-dimethoxycyclopent-2-en-1-ones have been prepared from the corresponding 3-N-substituted 5-allenyl-2,5-dichloro-4,4-dimethoxycyclopent-2-en-1-ones using selective oxidative cleavage of their allene bond by the RuCl₃−NaIO₄ system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1646–1648, September, 1997.     

Selective Oxidation of Methane to Methanol Using Molecular Oxygen on MoOx／（LaCoO3＋Co3O4） Catalysts

Comparatively high CH3OH selectivity (60.0%) and yield (6.7%) were obtained on MoOx/(LaCoO3 Co3O4) catalysts in selective oxidation of methane to methanol using molecular oxygen as oxidant. The interaction between MoOx and La-Co-oxide modified the molecular structure of molybdenum oxide and the ratio of O^-/O^2- on the catalyst surface, which controlled the catalytic performance of MoOx/(LaCoO3 Co3O4) catalysts.     

Catalytic oxidation of CO,hydrocarbons, and ethyl acetate over perovskite-type complex oxides

The catalytic activity of M^IM^IIO₃] perovskite-type complex oxides (M^I = La, Y, Nd, Yb; M^II = Co, Mn, Ni) in the oxidation of CO, propylene, benzene, ethylbenzene,o-xylene, and ethyl acetate was investigated. The Co-containing catalysts were shown to be more active in the oxidation than the Mn-containing catalysts. A relationship between the catalytic and adsorption properties was established.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 602–605, April, 1994.     

Metal Nanoparticles on Stainless Steel Surfaces as Novel Heterogeneous Catalysts

The goal of this work was the development of a novel type of heterogeneous catalyst, consisting of bare metal nanoparticles on stainless steel foils, which can be shaped to any kind of architecture and, if necessary, heated electrically. Solutions of pre-prepared, ligand protected and monodispersed gold, palladium, platinum and rhodium nanoparticles were sprayed onto stainless steel foils, followed by the careful removal of the ligand molecules by an oxygen plasma treatment. Due to this, bare particles become irreversibly fixed on the steel support. It could be shown that the original particle sizes do not change during the plasma treatment. Foils, densely coated with the nanoparticles, were used for gas phase catalyses in a self-made reactor at room temperature or at 60 °C. Hydrogenation of 1,3-butadiene at 15 nm Pd and 2 nm Pt, CO oxidation at 16 nm, 8 nm and 1.4 nm gold and NO reduction with NH₃ at 2 nm Rh particles were performed, indicating that the novel catalysts might in principle be applicable in technical processes if the experimental conditions like form and temperature would be optimized. Dedicated to Professor Dieter Fenske on the occassion of his 65th birthday.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

A simple, rapid and efficient protocol for the synthesis of methylthiomethyl esters under Swern oxidation conditions

A rapid, mild and high yielding method for the synthesis of methylthiomethyl esters is reported from the corresponding aliphatic, aromatic and unsaturated carboxylic acids under Swern oxidation conditions using dimethylsulfoxide, oxalyl chloride and triethylamine at low temperature.     

Inhibition of the toxic byproduct during photocatalytic NO oxidation via La doping in ZnO

It is of a great challenge to develop semiconductor photocatalysts with potential possibilities to simultaneously enhance photocatalytic efficiency and inhibit generation of toxic intermediates.In this study,we developed a facile method to induce the La doping and cationic vacancie(V(Zn))on ZnO for the highly efficient complete NO oxidation.The photocatalytic NO removal efficiency increases from 36.2%to 53,6%.Most importantly,a significant suppressed NO2 production also has been realized.According to the DFT calculations,ESR spectra and in situ FTIR spectra,the introduction of La^3+induce the redistribution of charge carriers in La-ZnO,which promote the production of·O2^- and lead to the formation of V(Zn)for the formation of·OH,contributing to the complete oxidation of NO to nitrate.Besides,the conversion pathway of photocatalytic NO oxidation has been elaborated,This work paves a new way to simultaneously realize the photocatalytic pollutants removal and the inhibition of toxic intermediates generation for efficient and safe air purification.     

Enzymatic determination of phenols using peanut peroxidase

The influence of phenol and its derivatives on the kinetics of oxidation of aryldiamines (indicator-substrates) catalyzed by novel plant peroxidase—cationic peanut peroxidase—was studied. The character of influence of phenols on the kinetics of enzymatic oxidation of benzidine, o-dianisidine, and 3,3′,5,5′-tetramethylbenzidine (TMB) with hydrogen peroxide was found to depend on a correlation between redox properties of phenols and the indicator-substrate of peroxidase. Thus, the catalytic activity of peanut peroxidase is inhibited by phenols with redox potentials higher than that of aryldiamines mentioned above, whereas phenols with potentials below those of aryldiamines, play the role of second substrates of the enzyme. The enzymatic procedures for the determination of numerous phenols on the level of their concentrations 0.05–80 μM were developed using the reactions of benzidine, o-dianisidine, and TMB oxidation. Different analytical signals—the indicator reaction rate and the induction period duration—were used for the determination of phenols, belonging to various groups—the inhibitors and second substrates of the enzyme, respectively.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.