基于荧光玻璃的高效LED白光技术

采用高温熔融法制备了一定质量比例的SiO_2-YAG∶Ce~(3+)片状荧光玻璃,厚度为0.2 mm,分析其XRD物相、光学和SEM微观结构、PL光谱。结果表明:荧光玻璃保留了晶相,荧光粉颗粒在玻璃基质中均匀分布,荧光玻璃和荧光粉的激发响应关系一致。在465 nm蓝光激发下,发射波长均在535 nm附近,表明荧光玻璃除含有玻璃相,还有荧光粉的物质结构特性。将不同波长蓝光芯片与不同荧光粉含量的荧光玻璃进行封装测试,结果表明:器件的流明效率可达到234.81 lm/W;色温和显色指数均随荧光粉含量增加而单调下降,呈现高色温和低显色指数;荧光粉质量分数从6%增加至15%时,不同波长激发下的色坐标x与y呈现大致相同的线性变化率。采用450 nm激光激发荧光玻璃,测试样品温度变化发现温升较缓,温降迅速,耐热性能优越。实验结果表明,将荧光玻璃用于LED白光照明封装,能实现流明效率和耐热性能的大幅提升,形成良好的白光输出。     

LiGd(W_yMo_(1-y))_2O_(8-x/2)F_x∶Eu~(3+)红色荧光粉的制备和发光特性

采用高温固相法制备了LiGd(W_yMo_(1-y))_2O_(8-x/2)F_x∶0.4Eu~(3+)(x=0~1,y=0~1)系列白光LED用红色荧光粉。通过扫描电子显微镜、X射线衍射仪、红外光谱仪、荧光光谱仪对荧光粉的形貌、结构、光学性能进行了表征。结果表明,Eu~(3+)、F-和WO_4~(2-)的掺杂没有改变LiGd(MoO_4)_2的四方晶系白钨矿结构;F~-和WO_4~(2-)最佳掺杂量分别为x=0.6,y=0.4。在396 nm激发下,LiGd(W_(0.4)Mo_(0.6))_2O_(7.7)F_(0.6)∶0.4Eu~(3+)的发光强度比未掺杂样品提高了60%,量子效率可达66.23%。当温度升高至100℃时,样品的发射强度降为25℃时的76.6%。在460 nm激发下,样品的最强窄带发射峰位于617 nm处,归属于~5D_0→~7F_2跃迁,色坐标为(0.649 9,0.346 3)。5D0能级的荧光寿命曲线遵循单指数规律衰减,随着F-掺杂浓度的增加,5D0能级的荧光寿命不断增加,归因于低声子能量的F-掺入有效减小了能量的无辐射跃迁概率。所制备的LiGd(W_(0.4)Mo_(0.6))_2O_(7.7)F_(0.6)∶0.4Eu~(3+)荧光粉有望应用于白光LED。     

M_2Eu_xLn_(1-x)AlO_5(M=Ca,Sr,Ba,Ln=La,Gd,Lu)红色荧光粉发光性质的研究

用高温固相反应法合成了M_2Eu_xLn_(1-x)AlO_5(M=Ca,Sr,Ba,Ln=La,Lu,Gd)荧光粉,研究了荧光粉的发光性质。在紫外光和近紫外光激发下,样品的发射光谱由Eu~(3+)的5D0→7FJ(J=0,1,2,3,4)特征发射组成。其中Eu3+离子位于590 nm附近的5D0→7F1和位于620 nm附近的5D0→7F2跃迁发射的强度最强。荧光粉的激发光谱都是由O~(2-)-Eu~(3+)电荷迁移带和Eu~(3+)的f-f跃迁构成的。M_2Eu_xLa_(1-x)AlO_5(M=Ca,Sr,Ba)的O2--Eu~(3+)的电荷迁移带的峰位按Ca、Sr、Ba顺序向长波方向移动。研究了用La、Gd和Lu替代M_2Eu_xLn_(1-x)AlO_5中Ln的位置对样品发光的影响。给出了Eu~(3+)浓度对发光强度的影响。分析了M_2Eu_xLn_(1-x)AlO_5和M_2Eu_xLn_(1-x)AlO_5的荧光寿命。     

SrSnO_3:Eu~(3+)红色荧光粉的合成及发光性能的研究

通过传统的高温固相法成功合成了SrSnO_3∶Eu~(3+)红色荧光粉。通过对样品X射线衍射图谱、激发发射图谱和衰减曲线的研究,证明了合成的SrSnO_3∶Eu~(3+)红色荧光粉是纯相而且具有良好的发光性能与热稳定性。SrSnO_3∶0.05Eu~(3+)荧光粉在396 nm激发下Eu~(3+)通过~5D_0→~7F_2能级跃迁,在614 nm处发出比较强烈的红光,色坐标为(0.608,0.386),通过计算得出温度猝灭的活化能ΔE=0.138 e V。综上所述,SrSnO_3∶Eu~(3+)荧光粉是一种比较有前途的白色LED用近紫外蓝光激发红色荧光粉。     

Crystal structure and pale‐yellow emitting properties of K3Gd1–xDyxB6O12 solid solutions

A new potassium dysprosium polyborate, K₃DyB₆O₁₂, has been prepared via the high‐temperature molten salt method and structurally characterized by single‐crystal X‐ray diffraction analysis. The structure can be described as a three‐dimensional framework composed of isolated bicyclic [B₅O₁₀]^5? groups and Dy³⁺ and K⁺ ions. The Fourier transform IR (FT–IR) and ultraviolet–visible (UV–Vis) spectra were investigated. A series of K₃Gd_1–xDy_xB₆O₁₂ phosphors was prepared and their photoluminescence properties were studied. The K₃Gd_1–xDy_xB₆O₁₂ phosphors exhibit a strong yellow emission band at 577 nm (the ⁴F_9/2→⁶H_13/2 transition of Dy³⁺) under UV excitation of 275 nm (the ⁸S_7/2→⁶I_J transition of Gd³⁺), suggesting the occurrence of the energy transfer Gd³⁺→Dy³⁺. The optimized doping concentration of the Dy³⁺ ion was 8 mol%. We may expect that K₃Gd_1–xDy_xB₆O₁₂ is a promising pale‐yellow emission phosphor for visual displays or solid‐state lighting.     

Fe3+、Ce3+共掺杂γ-LiAlO2的发光性质

采用不同于传统固相反应法的制备方法合成了Fe,Ce 共掺杂γ-LiAlO₂。通过XRD和 SEM分析表明,采用这种方法能够成功获得尺寸小于10 μm的四方相结构γ-LiAlO₂荧光粉。从γ-LiAlO₂ ∶ Fe,Ce 的激发和发射光谱可以看出,通过引入少量的铈离子,我们首先发现了铈离子掺杂对样品的发光效率有明显的影响。并且随着铈离子浓度的增加,其发光效率也出现规律性的变化,而且发射光谱在Ce离子摩尔分数达到1.5%的情况下发光效率最强,当Ce离子摩尔分数达到3％时,发光效率明显下降。这种高效的荧光粉作为转光剂应用于人工植物照明和农用转光膜具有积极的意义。     

一种新型红色荧光粉CaAl12O19： Eu,Mn的制备及发光性能

固相法制备了碱土金属铝酸盐荧光粉CaAl₁₂O₁₉ : Eu,Mn,测试了样品的XRD及激发与发射光谱,对样品的结构及其发光性能进行了分析,并且考察了灼烧温度及Eu³⁺的浓度对样品发光性能的影响,对Eu³⁺的作用机理进行了探讨。 该荧光粉能被波长短于550 nm的蓝绿光以及紫外和近紫外光激发,其发射光谱峰值在590,615,645,657 nm,其中前两个为Eu³⁺的特征发射,后两个为Mn⁴⁺的²E-⁴ A₂跃迁发射。该荧光粉的最佳烧结温度与时间分别为1 550 ℃和4 h,Eu³⁺的最佳掺杂摩尔分数为0.11%左右。     

Green-emissive transparent BaSi2O5:Eu film phosphor on quartz glass created by a sputtering thermal diffusion process

Eu²⁺-doped BaSi₂O₅ film phosphors on quartz substrates are fabricated by radio-frequency magnetron sputtering thermal diffusion. The BaSi₂O₅: Eu²⁺ phosphor crystals have some preferred orientations that are lattice-spacing matched with the crystallized β- SiO₂ crystals, and they show pore and grain boundary-free morphology with a rod-like shape fused into the crystallized β- SiO₂ crystals. The BaSi₂O₅: Eu²⁺ film phosphor has a high transparency, with a transmittance of about 30% in visible light. The BaSi₂O₅: Eu²⁺ film phosphor shows 510 nm green emission from the f–d transition of the Eu²⁺ ions, and in particular the best sample shows a green photoluminescence brightness of about 5% of a BaSi₂O₅: Eu²⁺ powder phosphor screen. These excellences in optical properties can be explained by less optical scattering at pores or grain boundaries, and less reflection at the continuously index-changed interface.     

Comparison study of the luminescent properties of the white-light long afterglow phosphors: CaxMgSi2O5+x:Dy(x=1, 2, 3)

A series of Dy³⁺-doped calcium magnesium silicate phosphors: CaMgSi₂O₆:Dy³⁺, Ca₂MgSi₂O₇:Dy³⁺, and Ca₃MgSi₂O₈:Dy³⁺ with white long-lasting afterglow were prepared and investigated. The characteristic intra-configurational 4f emissions of Dy³⁺ were observed in the emission spectra as well as the afterglow spectra under ultraviolet excitation. The combination of the 480 nm blue emission corresponding to the ⁴F_9/2→⁶H_15/2 transition and the 575 nm yellow emission corresponding to the ⁴F_9/2→⁶H_13/2 transition yielded white-light emission. The white-coloured afterglow emission can last more than 1 h for most of the samples under study. The concentration dependence of the ratio of the yellow emission intensity with blue emission intensity was also examined and found to be varied for the different hosts. The thermoluminescence spectra above room temperature are employed for the discussion of the origin of the traps and the mechanism of the persistent luminescence.     

Dy3+ emission in M5(PO4)3F (M = Ca, Ba) phosphor

Ultrafine M₅(PO₄)₃F:Dy³⁺ (M = Ca, Ba) phosphors were prepared via combustion process using metal nitrates as precursors. The formation of crystalline phosphate was confirmed by X-ray diffraction pattern. The PL excitation spectra show the excitation peaks observed at 250 to 400 nm due to f → f transition of Dy³⁺ ion, which are useful for solid-state lighting purpose (mercury free excitation). The PL emission of Dy³⁺ ion by 348 nm excitation gave an emission at 489 nm (blue), 582 nm (yellow) and 675 nm (red). All the characteristics of BYR emissions like BGR indicate that Dy doped Ca₅(PO₄)₃F and Ba₅(PO₄)₃F phosphors are good candidates that can be applied in solid-state lighting phosphor (mercury free excited lamp phosphor) and white light LED.