Synthesis,characterization and electrochemical performances of LiFePO4/graphene cathode material for high power lithium-ion batteries

LiFePO₄/graphene (LiFePO₄/G) cathode with exciting electrochemical performance was successfully synthesized by liquid phase method. LiFePO₄ nanoparticles wrapped with multi-layered grapheme can be fabricated in a short time. This method did not need external heating source. Heat generated by chemical reaction conduct the process and removed the solvent simultaneously. The LiFePO₄/G were analyzed by X-ray diffraction (XRD) analysis, scanning electron microscope (SEM), transmission electron microscopy (TEM), magnetic properties analysis and electrochemical performance tests. The LiFePO₄/G delivered a capacity of 160 mAh g⁻¹ at 0.1C and could tolerate various dis-charge currents with a capacity retention rate of 99.8%, 99.2%, 99.0%, 98.6%, 97.3% and 95.0% after stepwise under 5C, 10C, 15C, 20C, 25C and 30C, respectively.     

Systematic Tuning and Switching of Neutral and Ionic Phases in a Donor–Acceptor Chain Compound by Doping with Less‐Active Donors and by Pressure Application

The temperature‐induced stepwise neutral–ionic (N–I) phase transition in the covalently bonded donor–acceptor chain compound [Ru₂(2,3,5,6‐F₄PhCO₂)₄DMDCNQI] ? 2(p‐xylene) (2,3,5,6‐F₄PhCO₂^?=2,3,5,6‐tetrafluorobenzoate; DMDCNQI=2,5‐dimethyl‐N,N′‐dicyanoquinodiimine) was systematically tuned over a wide temperature range using two techniques: 1) A chemical technique based on doping with a less‐active donor unit [Ru₂^II,II(F₅PhCO₂)₄] (F₅PhCO₂^?=pentafluorobenzoate), thereby providing an isostructural doped series [{Ru₂^II,II(2,3,5,6‐F₄PhCO₂)₄}_1?x{Ru₂^II,II(F₅PhCO₂)₄}_xDMDCNQI] ? 2(p‐xylene), with x=0.06, 0.10, 0.21, and 0.24; and 2) a physical technique, which was the application of hydrostatic pressure to the doped compounds. The stepwise N–I transition observed in the original compound was systematically varied in terms of the viewpoints of both transition temperature and transition features (stepwise or monotonic) dependent on the amount of dopants x. Application of pressure efficiently tuned the N–I transitions, with the oxidation phases being dramatically modified by applying only weak pressure up to 4 kbar. Even in cases that led to N–I transitions in small domains of the chains at ambient pressure, the application of pressure caused an expansion of the domains that enabled N–I transitions, finally leading to a complete change in the oxidation state of the chains, from neutral to ionic, accompanied by a change from a paramagnetic state to a ferrimagnetically ordered state.     

Electrochemical Phase Evolution of Metal-Based Pre-Catalysts for High-Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li-S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal-based pre-catalysts (Co₄N) in working Li-S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single-crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all-phase polysulfide-involving reactions. Consequently, Co₄N enables stable operation of high-rate (10 C, 16.7 mA cm⁻²) and electrolyte-starved (4.7 μL mg_S⁻¹) Li-S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low-valence metal compounds.     

Landau theory for isotropic,nematic, smectic-A,and smectic-C phases

ABSTRACT

We use the Landau theory of phase transitions to describe the phase diagram of a liquid crystal displaying the isotropic (i), nematic (N), smectic-A and smectic-C phases. The order parameter of the smectic-C phase is defined as the projection of the director on the plane of the smectic layers, vanishing in the smectic-A phase. We present a detailed phase diagram that shows transition between any two of these phases, containing a triple point INA, a Lifshitz point NAC, a tricritical at the NA line, and a critical end point IAC. As one approaches the NC line from the smectic-C phase, the tilt angle approaches a nonzero value, but if the AC line is approached, the tilt angle vanishes according to the distance to the AC line to the power 1/2.     

Competition between Liquid-liquid De-mixing,Crystallization, and Glass Transition in Solutions of PLA of Different Stereochemistry and DEET

Liquid-liquid(L-L)de-mixing and vitrification of solutions of either crystallizable poly(L-lactic acid)(PLLA)or non-crystallizable poly(D/L-lactic acid)(PDLLA)with 50 m%N,N-diethyl-3-methylbenzamide(DEET)were analyzed by calorimetry and cloud-point measurements,which allows drawing conclusions about the effect of polymer stereochemistry on the phase behavior.Regardless of the PLA stereochemistry,vitrification of the solutions on fast cooling,hindering crystallization of PLLA,occurred below-20℃ and suppressed prior L-L de-mixing.The experimental results prove that crystallization in samples containing crystallizable PLLA,observed at around 55℃ on slow cooling,is not preceded by L-L de-mixing.     

Experimental and Modeling Investigation of Radical Homopolymerization of 2‐(Methacryloyloxyethyl) Trimethylammonium Chloride in Aqueous Solution

The radical homopolymerization kinetics of 2‐(methacryloyloxyethyl) trimethylammonium chloride (TMAEMC) in aqueous solution is investigated across a wide range of initial monomer contents (5–35 wt%), ionic strengths, and pH levels using an in‐situ NMR technique to track monomer consumption over the complete conversion range. Molar mass distributions (MMD) of the final homopolymers are also examined, with additional batch and semi‐batch experiments conducted in a stirred vessel. The rates of monomer conversion and polymer MMDs are dependent on initial monomer content but almost entirely independent of pH and the presence of salts, with some acceleration of rate observed for low monomer levels at very high salt concentration. To aid with the interpretation of these results, the conductivity and counterion activity of monomer and polymer mixtures are measured to determine the extent of electrostatic interactions at various levels of conversion. These results are combined with recently reported measurements of TMAEMC homopropagation kinetics to develop a TMAEMC homopolymerization model that captures the systematic decrease in rates of monomer conversion observed with increased initial monomer content during batch polymerization as well as provides a good representation of semi‐batch polymerization.     

Phase behavior in mixtures of a homopolymer and a block copolymer. 4. SALS and SAXS studies

Phase behavior of blends of poly(vinyl methyl ether) (PVME) with four styrene-butadiene-styrene (SBS) triblock copolymers, being of various molecular weights, architecture, and compositions, was investigated by small-angle light scattering. Small-angle X-ray scattering investigation was accomplished for one blend. Low critical solution temperature (LCST) and a unique phase behavior, resembling upper critical solution temperature (UCST), were observed. It was found that the architecture of the copolymer greatly influenced the phase behavior of the blends. Random phase approximation theory was used to calculate the spinodal phase transition curves of the ABA/C and BAB/C systems; LCST and resembling UCST phase behavior were observed as the parameters of the system changed. Qualitatively, the experimental and the theoretical results are consistent with each other. © 1996 John Wiley & Sons, Inc.     

A FREQUENCY OFFSET ESTIMATION AND COMPENSATION ALGORITHM FOR K/Ka-BAND COMMUNICATIONS

This paper presents a new open-loop technique for estimating and correcting Doppler frequency shift in K/Ka-band communication systems with special reference to the advanced communications technology satellite (ACTS) mobile terminal (AMT) modem, which utilizes square-wave pulse-shaped, binary differential phase shift-keyed (DPSK) modulation. The novelty of this estimation scheme is that it exploits the Doppler-induced phase shift over a fraction of a symbol interval to provide an estimate of the Doppler offset, without requiring symbol synchronization. Furthermore, by utilizing time-differential detection (delay-and-multiply), the proposed technique can tolerate much larger frequency offsets than existing open- or closed-loop techniques. Analytical results are provided for the variance of the above estimator and the error probability performance of the AMT is evaluated in the presence of the Doppler correction. Practical design considerations are also discussed, including a method for modifying the front end, digital bandlimiting filter in such a way that Doppler bias effects in the new estimator are eliminated. Simulation results reveal that, in general, performance improves with increasing data rates, i.e., the new frequency offset estimation/compensation algorithm induces a degradation from ideal of approximately 1 dB at a 6 dB energy per data symbol (bit) and a 2⋅4 kbps data rate. However, there is no appreciable degradation when the data rate is increased to 9⋅6 or 19⋅2 kbps.     

基于庞加莱截面的语音基音检测

提出了利用庞加莱截面检测语音信号基音的方法,通过延时重构语音信号的相空间,在相空间内计算通过某点的庞加莱截面,根据相轨迹穿过截面上初始点邻域交点进行基音检测;实验表明,基于庞加莱截面的语音信号的方法,描述语音信号的非线性特性具有较高的准确性和时间分辨率。