Ag-MoO3催化丙烯直接气相环氧化反应的原位红外研究

制备了对丙烯直接气相环氧化具有较好催化性能的Ag-MoO3催化剂, 采用原位FT-IR技术研究了丙烯、环氧丙烷及丙烯+氧气的混合气在Ag和Ag-MoO3催化剂表面上的吸附及反应行为. 研究表明, 丙烯在Ag和Ag-MoO3催化剂表面上吸附后, 均不发生化学反应, 而环氧丙烷吸附后在较高温度下则发生开环和聚合反应直至产生积炭. 与Ag催化剂相比, 在Ag-MoO3催化剂上, MoO3的加入在降低催化剂活性的同时, 在一定程度上抑制了产物环氧丙烷的开环及深度反应, 使环氧丙烷的选择性提高. 另外, 在较低的反应温度和较短的滞留时间下, 环氧丙烷发生深度反应的程度明显降低.     

Some selected problems of nonaqueous microemulsions — phase diagrams and variation of the composition in the quaternary and ternary systems

A variety of quaternary and ternary systems of the type of dodecane/aliphatic alcohols/Na-dodecyl sulphate/water or a water-replacing component (formamide, ethylene glycol, propylene glycol, propylene carbonate, dimethylsulfoxide, acetonitrile) were subjected to a comparative analysis of microemulsification. The compositions of the systems of the type of oil/surfactant/cosurfactant/water or nonaqueous liquid were changed with respect to surfactant (Na-dodecyl sulfate and triton X 114) concentration, cosurfactant (homologous aliphatic alcohols) concentration and mixing ratio of water and water-replacing component. The appertaining phase diagrams were plotted and compared with those of aqueous systems.The experimental results suggest that the phase regions, which are designated as nonaqueous microemulsions, probably represent, not only microemulsions in the usual sense, but a separate kind of mixed phase whose microstructure is examined by special studies. Analogously to aqueous microemulsion systems, transparency and spontaneous formation of homogeneous multicomponent systems cannot serve as the sole criteria for waterless microemulsion formation. But they are important guiding properties of microemulsion formation in multicomponent systems.The variety of components involved in the chemical composition and the current insufficient knowledge do not permit to generally decide whether nonaqueous systems can be assigned to microemulsions or to molecular solutions. For clarifying this problem a detailed examination of the miscibility behavior, especially that of binary systems as a function of temperature, and the role that surfactant and cosurfactant play in the formation of homogeneous systems will be necessary.     

刚柔相嵌液晶高分子的赝二级相变温度

讨论了刚柔相嵌液晶高分子的向列相一各向同性相转变与其分子结构的关系．给出了该一级相变的赝二级相变温度Ｔ＊与这类液晶高分子的液晶基元和间隔基的长度、柔顺性（相关长度）以及它们之间的相互作用的关系的解析表示式．分析了液晶基元与间隔基连接处的表观弯曲（接口效应）对Ｔ＊的影响．文中的结论与实验相符．     

Crosslinked poly(ethylene oxide) modified with tetraalkylammonium salts as phase transfer catalyst

Radiation crosslinked poly(ethylene oxide)s (PEO) modified with two tetraalkylammonium salts: allyldimethyldodecylammonium bromide and ethylmethacrylate dimethyldodecylammonium bromide were prepared. They have been characterized by elemental analysis, IR, ¹H-NMR spectra, and DSC measurements. Their activity as phase transfer catalysts (PTC) in the model displacement reaction of 1-bromooctane with aqueous sodium cyanide were studied. The reaction kinetics were followed under pseudo-first-order conditions. Small amounts of onium salt inserted into the PEO network gave rise to a five time increase in the rate constant. The recovered catalysts could be re-used without loss of activity. © 1995 John Wiley & Sons, Inc.     

Ion mobility,phase transitions,and ion transport in potassium-ammonium hexafluorozirconates

The mobility of fluoride and ammonium ions (180–480 K) in compounds K_{2? n} (NH4)_nZrF₆ (0.2 ≤ n ≤ 1.70) was investigated by ¹⁹F and ¹H NMR. Correlations have been found between the composition of the cation sublattice, the character of ion motions, and phase transition temperature in these compounds. The hightemperature modifications with n ≥ 0.85 of the compounds are characterized by translational diffusion of fluoride and ammonium ions and by uniaxial anisotropy of the ¹⁹F magnetic shielding tensor. The electrophysical characteristics of these compounds were studied in the temperature range 300–480 K.     

Polymerization-induced phase separation in polyether-sulfone modified epoxy resin systems: effect of curing reaction mechanism

Polyethersulfone (PES)-modified epoxy systems with stepwise reaction were studied throughout the entire curing process by using optical microscopes, time-resolved light scattering (TRLS), and a rheolometry instrument compared with that of chainwise polymerization. The results suggested that the phase separation process is mainly controlled by the diffusion of epoxy oligomers for stepwise mechanism system and by that of epoxy monomers for chainwise mechanism system. In case of high PES content (SPES-20%) light-scattering results showed a viscoelastic phase separation and the characteristic relaxation time of phase separation can be described well by the WLF equation. However, in the case of low PES content (SPES-14%) secondary phase separation phenomenon was observed by Optical Microscope and further demonstrated by rheological study.     

Facial selectivity of the (R)-1,3-dimethyl-1-cyclohexyl cation in the gas phase

The model reaction between the (R)-1,3-dimethyl-1-cyclohexyl cation (I) and methanol has been investigated under gas-phase radiolytic conditions (750 Torr; 25-120 degrees C) with the aim of evaluating the intrinsic factors that govern the facial selectivity of biased carbocations. The peculiarity of the experimental approach allows the formation of different CH(3) (18)OH.I ionic adducts. Subsequent conversion of these adducts to give the corresponding E/Z covalent products follows different reaction coordinates, which are characterized by their own activation parameters. On the grounds of density functional theory (DFT) results, several [CH(3)OH.I] structures have been located on the relevant potential-energy surface (PES). The experimental results point to a gas-phase facial selectivity, which is mainly governed by entropic factors that arise as a result of the occurrence of different noncovalent ion-molecule "facial adducts" (FA). The formation of FAs may also play an important role in both the reaction dynamics and the positional selectivity. The present results cannot be interpreted by any of the models based on solution-phase experiments.     

Sensing of Trace Amounts of Dodecyl Benzene Sulfonate by Solid Phase Spectrophotometry

A very simple, selective and sensitive spectrophotometric method for the determination of dodecyl benzene sulfonate (DBS) has been investigated. In this method, the ion pair of DBS and methylene blue was adsorbed onto plasticized poly(vinylchloride) membrane as a solid phase extraction medium. The absorbance of the blue membrane was measured at 660nm against a blank membrane using a spectrophotometer. The influence of type and amount of plasticizer, pH, concentration of methylene blue, temperature of sample solution and time of extraction on the absorbance of membrane was studied. Linear calibration was obtained over a concentration range of 0.1 to 6.5µgmL^–1 of DBS. The method was applied to the determination of DBS in different commercial detergents. The precision and accuracy of the method is comparable with the conventional standard method. This method is cost-effective, and the use of organic solvent such as chloroform is completely eliminated.     

Improvement of cyclosporin A determination in whole blood by reversed-phase high-performance liquid chromatography

A chromatographic method was developed for the determination of cyclosporin A in human whole blood using reversed-phase HPLC at room temperature. Most previous reports carried out this liquid chromatographic separation at temperatures above 70 degrees C. The present procedure greatly improves the detection limit by controlling peak broadening effects, as well as the lifetime of the column at room temperature. Under optimal conditions and using ketoconazole as an internal standard, the calibration graph was linear in the range of 16-1000 microg/L with a relative standard deviation of 3.72% at 150 microg/L and 2.45% at 300 microg/L (n = 11) of cyclosporin A. The detection limit was of 5.0 microg/L cyclosporin A. By this procedure, cyclosporin A pharmacokinetic parameters in healthy Chinese subjects were studied. The developed method could be applied to the quantification of cyclosporin A in human blood samples and allows the study of its pharmacokinetics in routine laboratories.     

Green organic syntheses: organic carbonates as methylating agents

Dimethylcarbonate (DMC) is a valuable methylating reagent that can replace methyl halides and dimethylsulfate in the methylation of a variety of nucleophiles. It couples tunable reactivity and unprecedented selectivity towards mono-C- and mono-N-methylation. In addition, it is a prototype example of a green reagent, because it is nontoxic, is made by a clean process, is biodegradable, and reacts in the presence of a catalytic amount of base, thereby avoiding the formation of undesirable inorganic salts as by-products. Depending on the reaction conditions, DMC can be reacted under plug-flow, CSTR, or batch conditions. Other remarkable reactions are those where DMC behaves as an oxidant. The reactivity of other carbonates is reported as well.