Solid phase synthesis of azapeptides using an automatic synthesizer

Peptides containing azaglycine located terminally or within the backbone have been prepared in the solid phase by means of an automatic synthesizer.     

一种铁氧体移相驱动器专用集成电路

介绍了ＳＡ０１８铁氧体移相驱动器专用集成电路的工作原理，电路设计和实验结果。该电路的内部电路设计有双路激励驱动器，放大器，积分器和双路高速比较器等功能单元。将铁氧体移相器的激励驱动器和相位控制器融于一体，大大减少了铁氧体移相器的外围设计。     

Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

Chemiluminescence upon isomerization of dimethyldioxirane in the gas phase and on a sorbent surface

Chemiluminescence (CL) was found upon the isomerization of dimethyldioxirane in the gas phase under argon atmosphere. The intensity of CL increases as temperature increases and decreases with time at constant temperature. If Silipor is placed in a cell containing the dimethyldioxirane vapor in argon, the intensity of CL sharply increases (more than 10 times) and then decreases following the exponential law. In all cases tripletly excited methyl acetate is the emitter of chemiluminescence.[/ p]Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2582–2583, October 1996.     

用反向调制照明法分析光栅成像效应

提出了用反向调制照法明分析光栅成像效应的观点，研究了光栅系统的反向衍射干涉效应，成功地揭示了泰伯效应与劳效应的内在联系，并在白光双光栅衍射干涉的“消色效应”的基础上获得了白光扩展光源照明下白光光栅成像效应和具有实用意义的四光栅干涉系统。     

High performance liquid chromatographic separation of polar and non-polar chlorophyll pigments from algae using a wide pore polymeric octadecylsilica column

A method employing a wide pore polymeric reversed phase column has been developed for the separation of most of the chlorophylls and related compounds previously described as occurring in marine microalgae. The high selectivity toward molecular shape of this kind of stationary phase has enabled compounds of very similar structure, such as chlorophylls c₁, c₂ and Mg-divinylpheoporphyrin a₅ monomethyl ester, and chlorophyll a and the phytol-substituted chlorophyll c-like pigments, which commonly coelute on monomeric bonded phases, to be resolved in a single run. Some of these pigments, formerly thought to be a single compound, have, in fact, been demonstrated to be groups of two or more. The method has been successfully applied to both algal cultures and natural sea water samples. When visible light absorbance detection was used, the method proved suitable for separation of various carotenoids.     

激光相位成像雷达的研究

利用无合作目标漫反射激光相位测距的原理,对关键单元技术进行分析和设计,研制成一种用于自主式车辆视觉导引的激光相位成像雷达的原理样机.     

提高微波功率源性能的一种新型控制系统

本控制系统用于抑制大功率速调管输出微波功率宏脉冲平顶波纹,改善电子直线加速器输出束流的品质.控制方法采用微分线性逼近和矩阵算法对系统的输入和输出进行分析,求出代表系统响应的传输矩阵,从而将复杂的激励一响应计算转化为简单的代数运算.实验结果显示出宏脉冲平项波纹得到了有效抑制,说明采用自适应前馈控制来获得平坦的宏脉冲平顶是切实可行的.     

光接入网中DWMT调制技术的研究

研究了光纤－电缆调制解调器接入技术的上行信道调制方式，分析了离散小波多音（DWMT）调制与其它调制方式相比所具有的特点和优势，提出了DWMT调制解调器的实现模型，设计了使用DWMT调制解调器的光纤－电缆调制解调器双向传输的系统方案；并对DWMT调制的系统特性进行了计算机仿真分析。仿真结果表明，DWMT调制是一项能有效实用于光纤－电缆调制解调器系统上行信道的技术。     

Crystal structure and magnetic ordering of RNi Si compounds

The element distributions and the magnetic ordering behaviour of compounds RNi₁₀Si₂ (R = Tb, Dy, Ho, Er, Tm) have been studied by neutron powder diffraction down to temperatures of 1.6 K. The compounds crystallize in an ordered variant of the ThMn₁₂ structure type in the tetragonal space group P4/nmm. An ordered 1:1 distribution of Ni and Si on sites 4d and 4e, respectively, corresponds to a modulation vector [0, 0, 1] with respect to the space group I4/mmm of the ThMn₁₂ structure. TbNi₁₀Si₂ orders antiferromagnetically below T _N = 4.5 K with a magnetic propagation vector of [0, 0, 1/2]. The magnetic Tb moments, 8.97(2) /Tb atom at 1.6 K, are aligned along the c-axis. The Ni sites in TbNi₁₀Si₂ do not carry any ordered magnetic moments. The compounds with R = Dy, Ho, Er, and Tm are paramagnetic down to 1.6 K and 3.0 K, respectively. Received 10 July 2002 / Received in final form 12 September 2002 Published online 29 October 2002