鞘磷脂和神经节苷脂对磷脂酰乙醇胺混合脂超分子体系液晶态立方相Im3m和Pn3m结构影响的研究

用磷脂酰乙醇胺(DEPE)、鞘磷脂(Sphingomyeline, Sph)、神经节苷脂(Gm1)和胆固醇(Chol)模拟了生物膜超分子体系液晶态结构, 通过用小角X射线衍射(SAXD)对混合脂体系液晶态结构进行了研究, 鉴定出了两种立方相: 即Im3m(Q²²⁹)和Pn3m(Q²²⁴)结构. 实验发现, 鞘磷脂的含量对DEPE膜的结构有一定的影响, 随着鞘磷脂浓度的增加, 混合脂体系的液晶态结构发生了由Im3m(Q²²⁹)到Pn3m(Q²²⁴)的变化. 神经节苷脂(Gm1)的含量对混合脂体系的液晶态结构也有一定的影响, 当神经节苷脂(Gm1)含量达到某一临界值时, 混合脂体系的液晶态结构发生了从Im3m(Q²²⁹)到Pn3m(Q²²⁴) 的变化. 当DEPE-Shp-Gm1超分子聚集体中含有胆固醇时, 胆固醇的极性头部(—OH)与磷脂酰乙醇胺(DEPE)、鞘磷脂(Shp)、神经节苷脂(Gm1)的极性头部通过氢键相互作用形成液晶态立方相Im3m(Q²²⁹)结构, 再通过疏水/亲水相互作用形成稳定的Pn3m (Q²²⁴)结构.     

Improvement in enzyme activity and stability by addition of low molecular weight polyethylene glycol to sodium bis(2-ethyl-L-hexyl)sulfosuccinate/isooctane reverse micellar system

The activity and stability of Chromobacterium viscosum lipase (glycerolester hydrolase, EC 3.1.1.3)-catalyzed olive oil hydrolysis in sodium bis (2-ethyl-1-hexyl)sulfosuccinate (AOT)/isooctane reverse micelles is increased appreciably when low molecular weight polyethylene glycol (PEG 400) is added to the reverse micelles. To understand the effect of PEG 400 on the phase behavior of the reverse micellar system, the phase diagram of AOT/PEG 400/water/isooctane system was studied. The influences of relevant parameters on the catalytic activity in AOT/PEG 400 reverse micelles were investigated and compared with the results in the simple AOT reverse micelles. In the presence of PEG 400, the linear decreasing trend of the lipase activity with AOT concentration, which is observed in the simple AOT reverse micelles, disappeared. Enzyme entrapped in AOT/PEG reverse micelles was very stable, retaining>75% of its initial activity after 60 d, whereas the half-life in simple AOT reverse micelles was 38 d. The kinetics parameter maximum velocity (V _max)exhibiting the temperature dependence and the activation energy obtained by Arrhenius plot was suppressed significantly by the addition of PEG 400.     

Synthesis and Opto-Electronic Properties of Cholesteric Cellulose Esters

Cholesteric materials display unique optical properties which can be exploited in opto-electronic applications such as light emitting diodes. The key feature is the position of the wavelength of the emitted light relative to the one of the selective reflection band. We have synthesized a set of cellulose derivatives displaying the cholesteric phase with the aim to investigate the correlation between chemical structure and properties. Phase transition temperatures, the chain packing, the wavelength of selective reflection but also absorption and fluorescence spectra were investigated as a function of the degree of substitution (DS), the nature of lateral substituents, the composition of doped systems and blends of different cellulose derivatives. Investigated were furthermore the degree of circular polarization of the emitted light for guest–host systems and for cellulose systems with chromophores linked by covalent bonds to the cellulose backbone as well as their performance in light emitting diodes. The conclusion is that the optical properties can be accounted for on the basis of the model of a one-dimensional photonic crystal. The limiting factor with respect to opto-electronic applications is the poor control of the uniformity of the helix formation and orientation.     

Crystal structure of KAsUO<Subscript>6</Subscript>·<Subscript>3</Subscript>H<Subscript>2</Subscript>O at 100 and 293 K

The crystal structure of KAsUO₆·3H₂O was solved at 100 K and 293 K. KAsUO₆·3H₂O at T = 100 K: tetragonal, P4/ncc, a = 7.2037(6) Å, c = 17.811(2) Å; Z = 4, R1 = 0.0263, wR2 = 0.0546, for 618 independent reflections; at T = 293 K: tetragonal, P4/ncc, a = 7.1600(4) Å, c = 17.746(1) Å; Z = 4, R1 = 0.0263, wR2 = 0.0433 for 427 independent reflections. The results of X-ray analysis are compared with our previous data on heat capacity of this compound, and changes that take place in the structure at elevated temperature are considered.     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.     

Structure and magnetic properties of Ca14MnP11

The compound Ca₁₄MnP₁₁ crystallizes in the Ca₁₄AlSb₁₁ structure type with the tetragonal space group I4₁/acd (Z=8) and lattice parameters of , c=20.7565(9) at 90 K. The structure consists of MnP₄⁹⁻ tetrahedron, P₃⁷⁻ trimer, 4 P³⁻ isolated anions and 14 Ca²⁺ cations. Similar to other compounds of this structure type containing phosphorous, the P₃⁷⁻ trimer has a central P atom that is best modeled in the structure as being equally split between two sites. In addition, there is no additional distortion of the manganese-containing tetrahedron compared with the main group analog, Ca₁₄GaP₁₁, suggesting that the Mn oxidation state is Mn²⁺. Temperature-dependent magnetic susceptibility shows that the compound is paramagnetic over the entire temperature range measured (2-300 K). The data can be fit with a modified Curie-Weiss law and provide an effective magnetic moment of 5.80 (2) B.M. with a Weiss constant of −2.13(2) K and . This moment is significantly higher than those measured for any of the Mn-containing analogs and is consistent with Mn²⁺. This result will be discussed in light of the electron counting scheme for Mn compounds of the Ca₁₄AlSb₁₁ structure-type.     

Estimation of the lipophilicity of antiarrhythmic and antihypertensive active 1-substituted pyrrolidin-2-one and pyrrolidine derivatives

The lipophilicity of some antiarrhythmic and antihypertensive active 1-[2-hydroxy- or 1-[2-acetoxy-3-(4-aryl-1-piperazinyl)propyl]pyrrolidin-2-one derivatives (1-12) has been investigated. Their lipophilicity (R(MO) and log k') was determined by reversed-phase thin-layer chromatography and reversed-phase high-performance liquid chromatography with mixtures of acetonitrile and Tris buffer as mobile phases. The partition coefficients of compounds 1-12 (log P(ScilogP)) were also calculated with the ScilogP program. Comparison of R(MO), log k' and calculated log D(7.0 ScilogP) values enabled calculation of clog D(7.0 TLC) and clog D(7.0 HPLC) values. Preliminary quantitative structure-activity relationship studies indicated that for active compounds there is a dependence between affinity for alpha(2)-adrenoceptors and their clog D(7.0 HPLC) values.     

Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.     

Topotactic reversible phase transition between room-temperature and a new low-temperature modification in the MCl3(THF)3 system

Both single crystals of VCl₃(THF)₃ as well as isotypic cocrystals of the composition MCl₃(THF)₃, M=Ti/V 1/3, undergo a topotactic reversible phase transition to a hitherto unknown low-temperature modification. The close relationship between this new structure and the room-temperature phase determined by Cottonet al. is discussed from the molecular and the intermolecular point of view: Both modifications are built up by conformationally very similar molecules which change their arrangement during the phase transition. Lattice energy calculations confirm that these two alternative arrangements correspond to minima of almost the same packing energy.Dedicated to Professor Dr. G. E. Herberich on the occasion of his 60th birthday.     

A practical fluorous benzylidene acetal protecting group for a quick synthesis of disaccharides

A new fluorous benzylidene acetal protecting group was regioselectively introduced into carbohydrates, deprotected under acidic conditions, and reused. Oligosaccharides were synthesized via regioselective conversion of the fluorous acetal group to the benzyl group by traditional reaction conditions. The fluorous compounds were easily separated from non-fluorous by-products by fluorous solid phase extraction.