An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

苯乙烯和丙烯酸-β-羟乙酯不同温度的竞聚率测定

苯乙烯和丙烯酸 β 羟乙酯不同温度的竞聚率测定吴平平吴玉芳陆琛杨全兴韩哲文（华东理工大学材料科学研究所上海２００２３７）陈顺喜朱清仁（中科院中国科技大学结构分析开放实验室合肥２３００２６）关键词苯乙烯，丙烯酸 β 羟乙酯，共聚合，竞聚率丙烯酸 β?..     

乙基橙与α,β,γ-环糊精包结物诱导圆二色性的研究

本文研究了乙基橙(EO)α、β、γ、环糊精(CD~x)包结物的诱导圆二色性(ICD)。用Kirkwood偶合振动模型探讨了包结物的包结形式都为轴向包结。然后利用Job连续变量作图法确定了其络合比, 即a-CDx/EO=1:1,βCDx(γ-CDx)/EO=2:1、1:1。     

流通池介质交换差示脉冲阳极溶出伏安法用于多元素重叠峰的分离及其同时测定

本文用流通池介质交换差示脉冲阳极溶出伏安法在盐酸介质中富集,而以碳酸钠-碳酸氢钠缓冲溶液为溶出介质,有效地分离了酸性介质中Cu(Ⅱ)、Sb(Ⅲ)、Pb(Ⅱ)、Tl(Ⅰ)、Cd(Ⅱ)、In(Ⅲ)的重叠溶出峰,实现了多离子的同时测定。     

因子分析—伏安法同时测定波峰重叠的混合物组份

本文将目标因子分析用于伏安分析法同时测定波峰重叠的混合物组份。用此法对Ｐｂ（Ⅱ）、Ｔｌ（Ｉ）混合体系的导数脉冲伏安重叠峰数据进行解析，获得了较理想的结果。     

Accuracy and long-term reproducibility of lead isotopic measurements by multiple-collector inductively coupled plasma mass spectrometry using an external method for correction of mass discrimination

The precision of isotopic measurements of Pb by thermal ionization mass spectrometry (TIMS) is limited by the fact that this element does not possess an invariant isotope ratio that can be used for the correction of mass fractionation by internal normalization. Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) can overcome this limitation, because with plasma ionization, elements with overlapping mass ranges are thought to display identical mass discrimination. With respect to Pb, this can be exploited by the addition of Tl to the sample solutions; the mass discrimination factor obtained for Tl can then be used for the correction of the measured Pb isotope ratios. In this article we present the results of a detailed study that investigates the accuracy and precision of such an external correction technique for mass discrimination based upon the results of multiple analyses of a mixed standard solution of NIST SRM-981 Pb and SRM-997 Tl. Our data indicate that normalization of the Pb isotope ratios to the certified isotopic composition of SRM-997 Tl produces Pb isotopic results that are significantly lower than recently published reference values by TIMS. This systematic offset can be eliminated by renormalization of the Pb data to a different Tl isotopic composition to obtain an empirically determined mass discrimination factor for Pb that generates accurate results. It is furthermore shown that a linear law is least suited for the correction of mass discrimination, whereas a power or exponential law function provide significantly more accurate and precise results. In detail, it appears that a power law may provide the most appropriate correction procedure, because the corrected Pb isotope ratios display less residual correlations with mass discrimination compared to the exponentially corrected data. Using an exponential or power law correction our results, obtained over a period of over seven months, display a precision (2σ) of better than 60 parts per million (ppm) for ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb and of better than 350 ppm for ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb/²⁰⁴Pb, and ²⁰⁸Pb/²⁰⁴Pb. This represents a significant improvement compared to conventional TIMS techniques and demonstrates the potential of MC-ICPMS for routine, high-precision measurements of Pb isotopic compositions.     

Efficiency of four different techniques in coupled HPLC-UV/VIS to quantify overlapping peaks with known spectral features

Summary Four different techniques to quantify unresolved chromatographic peaks with known spectral features combined with photodiode array detection, are investigated as regards their efficiency for the accurate and precise determination of drugs in the low g-range. The comparison includes peak suppression utilising difference chromatograms, first-order derivative chromatograms, selective chromatograms, generated by the calculation of orthogonal polynomial shares, and the powerful least-squares multicomponent analysis approach. Each of these methods uses UV-spectra taken throughout, the peak. The results presented and conclusions reached should enable the chromatographer to come to a decision about the reasonable use of these options now provided by multichannel detection in HPLC.     

Metrological role of neutron activation analysis. IB. Inherent characteristics of relative INAA as a primary ratio method of measurement

This is the second part of a paper which deals with the advantages and disadvantages of relative instrumental neutron activation analysis concerning traceability and uncertainty, and the current scope and possible future extensions of neutron activation analysis as a primary ratio method. The first part of this paper has been published in this Journal [1]. Received: 19 March 2001 Accepted: 2 October 2001     

Product or sum: comparative tests of Voigt,and product or sum of Gaussian and Lorentzian functions in the fitting of synthetic Voigt‐based X‐ray photoelectron spectra

A comparative study for the fitting of X‐ray photoelectron spectra (XPS) using different model functions is presented. Synthetically generated test spectra using Gaussian/Lorentzian convolution and a real measured spectrum are fitted with the three commonly used models: product, sum and Gaussian/Lorentzian convolution functions. In these limited tests, it was found that the sum function is superior to the product function, particularly for low‐noise spectra. Copyright © 2007 John Wiley & Sons, Ltd.     

分数导数结合傅里叶最小二乘拟合处理含噪音的重迭信号

提出了一种含噪音重迭信号的综合处理方法 :先用傅里叶最小二乘法拟合噪音数据 ,然后对拟合后的信号求 2 .5次导数 ,在对模拟数据研究的基础上 ,讨论了求导后峰位漂移及其影响因素 ,给出了一个用于矫正峰位值的经验公式。用该方法对模拟和实际的紫外含噪音重迭信号进行处理 ,结果良好