A new method for the determination of the 34S/32S ratio of water-soluble sulphur in soil

A new method for the determination of the ³⁴S/³²S ratio of water-extractable sulphate in soil is described. Soils are extracted directly with deionized water, which is evaporated down. The remaining residue is then rehydrated and transferred to tin cups containing an adsorbent and mixed with an oxygen donor (V₂O₅). Samples are then analysed using a continuous flow isotope ratio mass spectrometer. The new method requires around 10?g soil per determination, compared to much larger amounts (up to kilograms) of soil required for the previous methods. Sample preparation and subsequent analysis is quick and efficient. The method is demonstrated using a number of soils collected from around the world to provide a range of determined δ³⁴S values. The δ³⁴S values of water-extractable sulphur were broadly similar to those of the soil total sulphur.     

Analysis of the geometrical dependence of auxetic behavior in reentrant structures by finite elements

Materials with a negative Poisson's ratio(PR)are called auxetics;they are characterized by expansion/contraction when tensioned/compressed.Given this counterintuitive behavior,they present very particular characteristics and mechanical behavior.Geometrical models have been developed to justify and artificiall reproduce such materials' auxetic behavior.The focus of this study is the exploration of a reentrant model by analyzing the variation in the PR of reentrant structures as a function of geometrical and base material parameters.It is shown that,even in the presence of protruding ribs,there may not be auxetic behavior,and this depends on the geometry of each reentrant structure.Values determined for these parameters can be helpful as approximate reference data in the design and fabrication of auxetic lattices using reentrant geometries.     

水面舰艇编队的最佳防空队形探讨

最佳防御队形以编队对来袭导弹的可探测面积尽可能大为前提,并以"抗饱和攻击能力"为衡量标准.各方向的可拦截批次受两方面因素限制:一是来袭导弹被发现时其与指挥舰的距离,一般距离越大,防御准备就越充分,可拦截批次就越大;二是护卫舰到来袭导弹轨迹的距离,一般距离越小,单次拦截时间就越短,可拦截批次就越大.定义以概率1可拦截批次最小的方向为最危险方向,经计算初始队形各方向可拦截的批次不等,通过"削峰补谷"的方式予以均衡和优化.若以拦截批次的期望为标准,最危险方向与以概率1可拦截的批次为标准的结果相同.如果得到空中预警机的信息支援,在最危险方向上编队就可更早地对距离指挥舰148.4km远的导弹发起拦截,增大编队的抗饱和攻击能力,但由于防空导弹射程限制,预警机提供的信,息支援无法得到充分利用,此时限制编队抗饱和攻击能力的主要矛盾转向防空导弹的射程.     

Convergence of m-bonacci ‘golden ratios’

This paper proves that the ratios of consecutive terms of the m-bonacci sequence converge to a limit φ_m < 2 and, as m → ∞, these φ_m converge to 2. Further, it is shown that the generating functions for the m-bonacci sequences converge pointwise to the geometric series.     

A Repaid Procedure for Preparing Oxyen-18 Determination in Water Samples

An equipment for the speed δ¹⁸O analysis of water samples is described. It used the equilibrium isotopic exchange reaction between water and CO₂ gas. Outgasing of samples through capillary without freezing down the samples, together with shaking during the equilibrium time, reduced considerably time for sample preparation.

Apparatus is air termostated with hand valves. Measured δ values are not very sensitive to precision of preparation work and reaction conditions, except of temperature. With good temperature control the standard reproducibility of single measurement is better than 0,1‰     

Analysis of a meshless solver for high Reynolds number flow

In this paper, the extension of an upwind least‐square based meshless solver to high Reynolds number flow is explored, and the properties of the meshless solver are analyzed both theoretically and numerically. Existing works have verified the meshless solver mostly with inviscid flows and low Reynolds number flows, and in this work, we are interested in the behavior of the meshless solver for high Reynolds number flow, especially in the near‐wall region. With both theoretical and numerical analysis, the effects of two parameters on the meshless solver are identified. The first one is the misalignment effect caused by the significantly skewed supporting points, and it is found that the meshless solver still yields accurate prediction. It is a very interesting property and is opposite to the median‐dual control volume based vertex‐centered finite volume method, which is known to give degraded result with stretched triangular/tetrahedral cells in the near‐wall region. The second parameter is the curvature, and according to theoretical analysis, it is found in the region with both large aspect ratio and curvature, and the streamwise residual is less affected; however, the wall‐normal counterpart suffers from accuracy degradation. In this paper, an improved method that uses a meshless solver for the streamwise residual and finite difference for wall‐normal residual is developed. This method is proved to be less sensitive to the curvature and provides improved accuracy. This work presents an understanding of the meshless solver for high Reynolds number flow computation, and the analysis in this paper is verified with a series of numerical experiments. Copyright © 2012 John Wiley & Sons, Ltd.     

What can statistical process control show us about ionization chamber stability?

PurposeStatistical process control (SPC) has been shown to be a suitable tool for medical physicists to monitor quality and keep variability low and within specifications. We report our findings regarding ionisation chamber stability in our department when using a radioactive stability check device (RSCD) and we compare them with similar previously published records, including calibration results.MethodsWe retrospectively studied the stability of a PPC 40 parallel-plate chamber, and two Farmer chambers (FC65-G and FC65-P) by checking them with dedicated RSCDs. We analysed the data following SPC methodology which includes plotting I-MR control charts, monitoring out-of-control observations, calculating process capability ratios (C_p), and estimating conformance to specifications. We also estimated the C_p and adherence to specifications of previously published data.ResultsThe PPC40 chamber hardly went out of the control limits over the whole six-year period assessed. However, Farmer chamber verifications drifted in opposite directions in phase II, and the deviations observed did not agree with their calibration records, which only increased by a maximum of 0.5%. In phase I the most unstable chamber was the FC65-P with a C_p equal to 0.9 at a specification level of ±1%. The PPC40 chamber was stable to within a maximum C_p of 1.3. Several sets of analysed data, including ours and those from other authors, fitted well within these limits: within ±1.9% and ±1.5% for a C_p of 1.5 and 1.33 respectively.ConclusionsSPC with constant long-term RSCD checking gave us a meaningful plot of the instability of our ionisation chambers. Although a period of two years between calibrations should not be surpassed, in the interim this check can conform to specifications of ±1.5%.     

Weber Correspondence Analysis: The One-Dimensional Case

When designing programs or software for the implementation of Monte Carlo (MC) hypothesis tests, we can save computation time by using sequential stopping boundaries. Such boundaries imply stopping resampling after relatively few replications if the early replications indicate a very large or a very small p value. We study a truncated sequential probability ratio test (SPRT) boundary and provide a tractable algorithm to implement it. We review two properties desired of any MC p value, the validity of the p value and a small resampling risk, where resampling risk is the probability that the accept/reject decision will be different than the decision from complete enumeration. We show how the algorithm can be used to calculate a valid p value and confidence intervals for any truncated SPRT boundary. We show that a class of SPRT boundaries is minimax with respect to resampling risk and recommend a truncated version of boundaries in that class by comparing their resampling risk (RR) to the RR of fixed boundaries with the same maximum resample size. We study the lack of validity of some simple estimators of p values and offer a new, simple valid p value for the recommended truncated SPRT boundary. We explore the use of these methods in a practical example and provide the MChtest R package to perform the methods.     

Instant Controlled Pressure Drop technology: From a new fundamental approach of instantaneous transitory thermodynamics to large industrial applications on high performance–high controlled quality unit operations

Solvent extraction processes have been largely used in various industries. They recently were improved through new physical concepts such as CO₂ Supercritical Fluid Extraction, Ultrasound assisted process, Microwave-assisted extraction, Instant Controlled Pressure Drop DIC-assisted extraction… Systematically, a pretreatment stage of grinding takes place in order to improve the exchange surface increasing the starting accessibility. Swelling of the material structure implies an increase of the porosity thus leading to higher solvent diffusivity within the solid matrix. A new concept of expanded granule powder has recently been defined using Instant Controlled Pressure Drop DIC technology. Whatever the type of solvent is (even CO₂-SFE), such a swelled structure dramatically intensifies the kinetics through a higher specific exchange surface thanks to the open pores, while improving the solution solvent–solute diffusivity within the solid. Coupled to ultrasound, the internal transfer of solute within the pore solvent can likewise be intensified by replacing molecular diffusion within the pores by an effective convection transfer. In this work, we carried out a first approach of modeling of solvent extraction kinetics of expanded granules involving higher exchange surface and greater internal diffusion process.     

An even earlier (1717) usage of the expression “golden section”

In a previous article in this journal, Roger Herz-Fischler has pointed out an early usage of the expression “golden section” from 1789. In this note an even earlier usage from 1717 is discussed.