High-performance liquid chromatography with continuous gradient elution in screening for unknown metabolites of butoprozine directly in dog bile

This paper describes the screening for metabolites of butoprozine, a new anti-anginal drug, in dog bile by means of reverse-phase HPLC. Although it does involve a simple clean-up step to remove a substantial amount of endogenous bile compounds, this screening method nevertheless avoids extraction of metabolites and thus allows all metabolites to be introduced into the chromatographic system. A single run of 100 minutes from 100% water to 100% methanol in a linear gradient effects adequate separation of the great majority of metabolites without interference from remaining endogenous compounds. Two methods of differentiating between metabolite peaks and endogenous peaks have been worked out. The first one makes use of ¹⁴C-labeled butoprozine by measuring the amount of radioactivity in the column effluent while simultaneously recording the UV absorbance. The second method compares continuous gradient chromatograms of bile recorded before and after butoprozine administration under very similar conditions. The latter method can be applied to both radioactive and non-radioactive materials.     

An analysis of avidin, biotin and their interaction at attomole levels by voltammetric and chromatographic techniques

The electroanalytical determination of avidin in solution, in a carbon paste, and in a transgenic maize extract was performed in acidic medium at a carbon paste electrode (CPE). The oxidative voltammetric signal resulting from the presence of tyrosine and tryptophan in avidin was observed using square-wave voltammetry. The process could be used to determine avidin concentrations up to 3 fM (100 amol in 3 l drop) in solution, 700 fM (174 fmol in 250 l solution) in an avidin-modified electrode, and 174 nM in a maize seed extract. In the case of the avidin-modified CPE, several parameters were studied in order to optimize the measurements, such as electrode accumulation time, composition of the avidin-modified CPE, and the elution time of avidin. In addition, the avidin-modified electrode was used to detect biotin in solution (the detection limit was 7.6 pmol in a 6 l drop) and to detect biotin in a pharmaceutical drug after various solvent extraction procedures. Comparable studies for the detection of biotin were developed using HPLC with diode array detection (HPLC-DAD) and flow injection analysis with electrochemical detection, which allowed biotin to be detected at levels as low as 614 pM and 6.6 nM, respectively. The effects of applied potential, acetonitrile content, and flow rate of the mobile phase on the FIA-ED signal were also studied.     

反相高效液相色谱分离-安培法检测酚类化合物

本文报道了RP-HPLC-安培法检测测定酚类化合物的条件。在Shim-pack CLC-C_8柱上用含0.05mol/L NaH_2PO_4缓冲溶液的5％甲醇水溶液洗脱分离,于E+1.0V处检测。线性范围在0～7μg/ml,检测限达ng/ml。     

Analysis of organomercury compounds in sediments by capillary GC with atomic fluorescence detection

Analysis of methyl- and ethylmercury (MM and EM) halides in biological and environmental samples is generally performed by gas chromatography with electron capture detection. Tedious sample work-up protocols and poor chromatographic response (using packed columns) have, however, shown the need for the development of new methods in this field. This paper reports a sensitive method, free from these deficiencies, for the determination of methyl- and ethylmercury. The organomercury compounds (MM and EM) are first released from the sample matrix, by the combined action of acidic potassium bromide and cupric ions, and then extracted into dichloromethane. The initial extracts are subjected to thiosulfate clean-up and the organomercury species are isolated as their chloride derivatives by addition of cupric chloride, and subsequent extraction into a small volume of organic solvent. Capillary GC coupled with atomic fluorescence detection provided excellent separation efficiencies for methyl- and ethylmercury and proved to be a very selective and sensitive technique. The absolute detection limit for both MM and EM was found to be 0.2 pg.     

Increased electrochemical detector sensitivity by electrode surface modification

Summary Electrode surface modification by electrochemical pretreatment of glassy carbon electrodes was shown to enhance significantly the sensitivity of the electrodes for the detection of timolol and oxprenolol, but reduce slightly the sensitivity to prenalterol. This method may permit the detection of exprenolol and timolol with increased sensitivity, or may allow their detection at lower applied potentials than is presently possible. Electrode surface modification may prove to be a valuable aid to the detection of compounds that are considered to be outside the practical limits of electrochemical detection.     

The Many Measures of Molecular Dimensions

In contrast to the high precision with which masses of atoms and molecules can be specified, their external dimensions remain intrinsically fuzzy. Attention is directed to the difference between measurements of interatomic separations within molecules, that in many instances are cited with error bars of +/– 0.002 Å, and the available approximate magnitudes of over-all sizes, needed for estimating packing densities (in solids or liquids). The following account, is a critical examination of the underlying concepts and of the diversity of data in the literature, regarding internal dimensions (bond lengths), overall extensions, cross-sectional areas, and volumes of molecules that may be derived from a variety of experiments. Historical markers of the evolution of the underlying theories and experiments are included.     

DETERMINATION OF DEGREE OF CRYSTALLINITY OF NYLON 1212 BY WIDE-ANGLE X-RAY DIFFRACTION

Based on the X-ray scattering intensity theory and using the approximate expression for the atomic scattering factor, the correction factors for three crystalline peaks and an amorphous peak of Nylon 1212 were calculated and the formula of degree of crystallinity of Nylon 1212 was derived by a graphic multipeak resolution method. The degree of crystallinity calculated from the WAXD method is compatible with those obtained by density and calorimetry methods.     

Enantioselectivity of 6-O-alkyldimethylsilyl-2,3-di-O-methyl-β-cyclodextrins as chiral stationary phases in capillary GC

Summary Clenbuterol has been determined in urine by solidphase extraction on a C₁₈ cartridge, diazotization of the eluate with nitrite, coupling of the diazonium ion with 1-(naphthyl)ethylenediamine, and separation of the azo dye formed by HPLC with a C₁₈ column and a micellar mobile phase containing 0.1 M sodium dodecyl sulphate, 12%n-butanol and 0.05 M citrate buffer, pH 3. Recoveries higher than 90% were obtained by mixing the samples with a 20% 0.2 M NaOH before extraction. Limits of detection of 51 and 6.7 ng L⁻¹ were obtained with spectrophotometric and thermal lens spectrometric detection, respectively; respective repeatabilities were 3.1% (5 μg mL⁻¹) and 5.6% (0.16 μg mL⁻¹).     

Analysis of the pungent principles of ginger and grains of paradise by high-performance liquid chromatography using electrochemical detection

Summary The pungent principles of ginger and grains of paradise are examined using a reversed-phase HPLC column. An electrochemical detector is used to selectively detect the phenolic gingerols and shogaols. The retention indices of the compounds are compared using methanowater and acetonitrile-water as eluents.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Protease sensors for bioimaging

Optical imaging of specific molecular targets and pathways in vivo has recently become possible through continued developments in imaging equipment, reconstruction algorithms, and more importantly the availability of imaging reporter molecules. These reporter molecules encompass photoproteins expressed in vivo and exogenously administered probes detectable by fluorescence and/or bioluminescence imaging. One particularly enticing aspect of optical imaging is the ability to design activatible probes with inherent amplification. This review summarizes our experience in developing novel near-infrared fluorescent (NIRF) imaging agents that report on protease activities. These agents are designed to be biocompatible, highly activatible, and able to produce bright NIRF following protease cleavage.