Formylated polystyrene for the fabrication of pore selective aldehyde group functionalized honeycomb patterned porous polystyrene films

Formylated polystyrene (PS‐CHO) was synthesized by chemical modification of polystyrene (PS) for the fabrication of honeycomb patterned (HCP) porous PS films with aldehyde group functionalized pores via breath figure method under humid conditions. The incorporation of hydrophilic aldehyde group affected the hydrophobicity of PS solution and assisted the self‐assembly of PS‐CHO toward pore. The presence of aldehyde groups in the films were proved by the post treatment with Tollens's reagent, which results in silver decoration at pores. The morphology of the films before and after silver decoration was studied by scanning electron microscopy analysis. The pore selectively self‐assembled aldehyde groups in the patterned porous films can have many applications as a reactive substrate in biomaterials and chemical moieties adhesion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1181–1192     

XPS and TDS study of CO interaction with Pd–AlOx systems

The metal–substrate and metal–metal interactions (MSI, MMI) represent important effects determining the properties of supported catalysts, gas sensors and gettering alloys. We investigated the MSI and MMI effects by the X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption (TPD) in the case of Pd films deposited on Al₂O₃ and Al substrates. The study shows that the particle-size dependent metal–substrate interaction plays an important role in CO–Pd chemisorption, namely, in the case of “aluminium rich” Pd–aluminium oxide interface. CO chemisorption exhibits a low-temperature desorption feature at 360 K characteristic for Pd–Al and very small Pd particles. The MSI is explained by the formation of a Pd–Al intermetallic interface exhibiting a strong bimetallic Pd–Al interaction.     

Characterization of the Converging Jet Region in a Triple Torch Plasma Reactor

Enthalpy probe measurements were taken of the converging plasma plume in a triple torch plasma reactor and related to substrate heat flux measurements. Results show excellent entrainment of process gases injected into the converging plasma plume by way of the central injection probe. At lower pressures (40 kPa), the plasma volume is equivalent to at least a 3 cm diameter, 4 cm long cylinder, with relatively uniform temperature, velocity, and substrate heat flux profiles when compared to a typical dc arc jet. Converging plasma plume size, substrate heat flux, and enthalpy profiles are also shown to be a strong function of applied system power. Substrate heat flux measurements show smaller radial gradients than enthalpy probe measurements, because of the high radial velocity component of gases above the substrate boundary layer. Enthalpy probe measurements were also conducted for diamond deposition conditions and approximate temperature and velocity profiles obtained. Problems with the uniform gas mixture assumption prohibited more accurate measurements. Reproducibility of enthalpy measurement results was shown with an average standard deviation of 11.8% for the velocity and 7.6% for the temperature measurements.     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

Characterization of ZnO:AI films deposited by r.f.magnetron-sputtering at low temperature

Transparent conducting ZnO:AI thin films with good adhesion and Iow resistivity have been prepared on organic substrates and Coming 7059 glass substrates by r.f. magnetron-sputtering technique at Iow substrate temperature (25-210℃). Structural and photoelectric properties of the deposited films are investigated. The deposited films are polycrystalline with hexagonal structure and a preferred orientation with the c-axis perpendicular to the substrate. Only the (002) peak is observed.High quality films with resistivity as Iow as 1.0 x 10- 3Ω@ cm and 8.4 x 10- 4Ω@ cm, the average transmittance over 74% and 85% in the wavelength range of the visible spectrum have been obtained on different substrates.     

基片集成波导H面T型双工器严格模态分析

本文介绍了基板集成波导(SIW)H平面T型双工器的严格模态分析. 该分析基于用于波导T型结问题的经典耦合矩阵技术. H平面T型结不仅将两个SIW滤波器连接在一起, 而且还用作两个SIW滤波器的公共端口和第一级之间的耦合结构. 首先推导了H平面T型的设计方程, 然后设计, 加工并测试了一个工作在X波段的4阶原型双工器. 双工器的实测通带中心频率分别为9.03和9.42GHz. 同时, 测试结果与预测结果具有很好的一致性.     

弯曲衬底上应变异质外延薄膜形态失稳的相场模拟

论文旨在研究弯曲衬底上应变异质外延薄膜的表面非线性演化行为,研究采用了基于Eshelby等效方法的相场微弹性模型来模拟二维应变Si1-xGex/Si薄膜/衬底系统的形态失稳.建立了关于等效特征应变和长程序参量的自由能泛函,数值求解了时间相关的Ginzburg-Landau动力学方程.系统自由能包括化学能,弹性应变能以及薄膜、衬底与真空相两两之界面能.跟踪了全时的形态演化过程,给出了指定时刻的量子点形态轮廓图.结果表明,量子点倾向于沉积在弯曲衬底的波谷处,波谷处是能量有利位置,量子点在此处比在波峰处更加稳定.论文所做的相场模拟可以用来预测量子点形成的轮廓、尺寸和位置,可以为控制和生成周期性自组装表面纳米结构提供理论指导.     

Finite element buckling analysis of multi-layered graphene sheets on elastic substrate based on nonlocal elasticity theory

Graphene-polymer nano-composites are one of the most applicable engineering nanostructures with superior mechanical properties. In the present study, a finite element (FE) approach based on the size dependent nonlocal elasticity theory is developed for buckling analysis of nano-scaled multi-layered graphene sheets (MLGSs) embedded in polymer matrix. The van der Waals (vdW) interactions between the graphene layers and graphene-polymer are simulated as a set of linear springs using the Lennard-Jones potential model. The governing stability equations for nonlocal classical orthotropic plates together with the weighted residual formulation are employed to explicitly obtain stiffness and buckling matrices for a multi-layered super element of MLGS. The accuracy of the current finite element analysis (FEA) is approved through a comparison with molecular dynamics (MD) and analytical solutions available in the literature. Effects of nonlocal parameter, dimensions, vdW interactions, elastic foundation, mode numbers and boundary conditions on critical in-plane loads are investigated for different types of MLGS. It is found that buckling loads of MLGS are generally of two types namely In-Phase (INPH) and Out-of-Phase (OPH) loads. The INPH loads are independent of interlayer vdW interactions while the OPH loads depend on vdW interactions. It is seen that the decreasing effect of nonlocal parameter on the OPH buckling loads dwindles as the interlayer vdW interactions become stronger. Also, it is found that the small scale and polymer substrate have noticeable effects on the buckling loads of embedded MLGS.     

二嵌段共聚物薄膜模板化自组装

用实空间自洽场理论研究了二嵌段共聚物薄膜受限于平行板中的模板化自组装情况.通过改变平行板表面场修饰的情况,给出了粗略微观结构,观察了体系微相结构的变化过程,并对所观察到的变化规律作了讨论.另一方面,固定平行板的厚度、相分离强度等参数,改变吸附表面场的大小,观察并讨论了体系微相结构的变化及其规律.结果表明,二嵌段共聚物体系的微相结构是由受限条件和表面场修饰共同所决定的,因而控制表面场修饰情况的相关参数可以得到所期望的特定高分子体系结构.     

Synthesis surface effects on the stress and deformation of film/substrate system

The closed-form solutions of bending curvature and stress distribution in film/substrate system with the synthesis surface effect are proposed by minimizing the total potential energy. Effects of the roughness and the residual surface stress on stress in film are addressed. Results reveal that, at a given thickness of the substrate, effects of roughness and residual surface stress on the bending curvature become significant with decreasing the film thickness. The roughing surface will enlarge the magnitudes of bending curvature and film stress. The direction change of residual surface stresses can lead to a reversed bending of film/substrate system.