基于LRC与多样本扩充的指静脉识别方法北大核心CSCD

针对目前手指静脉识别由于训练样本不足引起图像识别率低的问题,提出基于线性回归分类(linear regression classification,LRC)与多样本扩充的指静脉识别方法。首先,利用矩阵变换生成原始图像的镜像,训练原始图像与镜像,增加指静脉图像中包含的有用信息;然后,基于LRC对测试和训练样本进行分类;最后,通过计算偏差得到最终分类结果,求出识别率。此外,设计了一种指静脉采集装置收集得到自建指静脉数据库。实验结果表明:所提算法在自建指静脉数据库、山东大学指静脉数据库、马来西亚理工大学指静脉数据库上的识别率分别达到98.93%、98.89%、99.67%,最低等误率为2.3888%。实验结果与其他传统和流行算法相比具有明显优势,拥有良好的实际应用价值。     

Ku波段宽带高增益基片集成腔圆极化阵列天线北大核心CSCD

提出了一款应用于Ku波段的宽带高增益基片集成腔(Substrate Integrated Cavity,SIC)圆极化阵列天线。通过引入沿SIC口径面对角线放置的一对半月形寄生贴片和SIC底部馈电纵缝,使SIC中的TM_(211)和TM_(121)谐振模式幅值相等、相位相差90°,产生高增益圆极化辐射。同时,双寄生贴片还引入了一种背腔缝隙耦合振子圆极化辐射模式,扩宽了天线高增益圆极化辐射带宽。在此基础上,设计了一款2×2单元顺序旋转馈电的SIC圆极化阵列天线。阵列天线采用双层基片集成波导顺序相移馈电网络进行馈电,进一步增大了天线的圆极化带宽。综合考虑天线的-10 dB反射系数带宽、3 dB轴比带宽和3 dB增益带宽,测试结果表明,圆极化阵列天线的有效带宽为10.74-13.30 GHz(21.3%),在通带范围内最大增益为14.50 dBi。     

终端近场通信天线研究北大核心CSCD

近场通信(NFC)已成为无线终端的标配功能,工作范围小、抗干扰性和安全性较高的特性使其被广泛应用于终端的移动支付和虚拟卡片等领域。由于近场天线产生的感应磁场会在临近的金属上耦合出反向涡流,并且金属屏蔽物覆盖会降低收发天线间的磁场耦合,紧凑终端中的电池、主板、外壳等金属元件将大幅影响NFC天线性能。本文从近场通信的历史、标准、系统结构出发,以终端NFC天线工作环境中的金属覆盖情况作为分类依据,对终端近场通信天线的研究进展进行了简要介绍。     

On the generation of test patterns for multiple faults

This article presents a new method to generate test patterns for multiple stuck-at faults in combinational circuits. We assume the presence of all multiple faults of all multiplicities and we do not resort to their explicit enumeration: the target fault is a single component of possibly several multiple faults. New line and gate models are introduced to handle multiple fault effect propagation through the circuits. The method tries to generate test conditions that propagate the effect of the target fault to primary outputs. When these conditions are fulfilled, the input vector is a test for the target fault and it is guaranteed that all multiple faults of all multiplicities containing the target fault as component are also detected. The method uses similar techniques to those in FAN and SOCRATES algorithms to guide the search part of the algorithm, and includes several new heuristics to enhance the performance and fault detection capability. Experiments performed on the ISCAS'85 benchmark circuits show that test sets for multiple faults can be generated with high fault coverage and a reasonable increase in cost over test generation for single stuck-at faults.     

Drying dissipative patterns of colloidal crystals of silica spheres in organic solvents

Drying dissipative structural patterns formed in the course of drying colloidal crystals of silica spheres (110 nm in diameter) in water, methyl alcohol, ethyl alcohol, 1-propyl alcohol, diethyl ether, and in the mixtures of ethyl alcohol with the other solvents above have been studied on a cover glass. The macroscopic broad rings were formed in the outside edges of the dried film for all the solvents examined. Furthermore, much distinct broad rings appeared in the inner area when the solvents were ethyl alcohol, methyl alcohol, and their mixtures. Profiles of the thickness of the dried films were sensitive to the organic solvents and explained well with changes in the surface tensions, boiling points, and viscosities of the solvents. The macroscopic and microscopic spoke-like crack patterns formed. The drying area (or the drying time) increased (or decreased) as the surface tension of the solvent decreased. However, the absolute values of these drying parameters are determined also by the boiling points of the solvents. Importance of the fundamental properties of the solvents is supported in addition to the characteristics of colloidal particles in the drying dissipative pattern formation.     

计算机模式识别法对甲状腺机能亢进症微量元素谱的研究

据Mahlanobis距离判别法，利用计算机多元统计判别程序，对14例甲亢思者和21例健康人的血清中锌、铁、铜、锰、镁和锶等元素浓度差异进行分类判别研究。选择锌、铁、钙、锶作判别特征参量时，患者和健康人的分类准确率为100％，服碘前与服碘后的甲亢患者分类准确率为92.7％，分类研究指出，甲亢患者血清中的铁和锶浓度高于健康人，经服碘治疗后，患者血清中上述元素浓度降低与健康人相近。     

卟啉超分子化合物在分子器件中的应用

分子电子器件已成为近年来的一个研究热点，卟啉类化合物因为光敏性好、性能稳定、易于修饰等优点成为分子器件研究的理想模型化合物。本文着重介绍了它在分子器件中的最新应用进展。     

Cyclodextrins as chiral stationary phases in capillary gas chromatography. Part VII: Cyclodextrins with an inverse substitution pattern – synthesis and enantioselectivity

Transferring the site of specific substitution of dipentylated cyclodextrins with methyl or acyl residues from the secondary 3-hydroxyl group to the primary 6-hydroxyl group was expected to provide new information on the mechanism of chiral recognition. The 3-position points towards and the 6-position points away from the cyclodextrin cavity which via inclusion complex formation is supposed to play a major role in chiral separation. The “inverse” 6-O-acyl-2,3-di-O-pentyl-cyclodextrins displayed almost no enantioselectivity but the corresponding 6-O-methyl derivatives are a versatile supplement to the chiral capillary GC phases nowadays available. Among the compounds that could be enantiomerically resolved are alcohols, amino acids, alkyl halides, bicyclic ethers, acetals, olefins, other hydrocarbons and chiral pharmaceuticals.     

X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.     

Effect of Electrode Pattern on the Column Structure and Yield Stress of Electrorheological Fluids

For electrorheological (ER) suspensions, the aggregate structures of particles were observed in electric fields by the use of transparent cells with different electrode patterns. Although the suspension is dispersed to noninteracting particles without electric fields, many aggregates are formed on the electrode surface in electric fields. Since the dipole–dipole interactions cause chain structures of particles and equilibrium conformations of chains are always aligned with electric field, the aggregates indicate the presence of columns spanning the electrode gap. The particle concentration in columns which are developed between parallel-plate electrodes is about 22 vol %. In striped electrodes, the particles construct striped aggregates along the electrodes and no particles remain in the insulating region. The particle concentration in striped aggregates is about 35 vol %. The nonuniformity of electric field is responsible for the high particle concentration. The increase in particle concentration of column lead to the high yield stress of electrified suspension. Therefore, the ER performance of suspension as an overall response can be improved by the electrode design.