硅基微波光子波束形成器研究进展

微波波束形成器是相控阵雷达、5G通信基站等射频发射系统中的核心器件。近年来硅基微波光子波束形成器以其带宽大、尺寸紧凑、重量轻、损耗低、抗电磁干扰等优势成为微波光子学中的研究热点之一。文章从微波光子波束形成的基本原理和性能指标出发,总结了近年来应用于微波光子波束形成器的多种集成可调光学真延迟线结构和波束形成网络架构,并介绍了微波光子波束形成系统集成芯片和自动化控制的最新进展,最后对硅基微波光子波束形成器的未来发展进行了展望。     

一种加载铁氧体磁环的高功率宽带巴伦

针对高功率天线的差分馈电和阻抗匹配问题,文中提出了一种基于同轴线结构加载铁氧体磁环的宽 带巴伦模型。双同轴线具有阻抗变换功能和较好的功率承载能力,铁氧体磁环改善了巴伦在低频时的输入匹配和 两个输出端口不平衡度。仿真和实测表明,此巴伦在0. 05~1. 24 GHz 内回波损耗低于-10 dB,去除3. 0 dB 系统插损 后单端插入损耗在1. 5 dB 以内,两端输出的相位不平衡度在5°以内,幅度不平衡度在2%以内。通过分析巴伦的电 磁热损耗场、温度场和应力形变场,验证了巴伦在高功率馈电下的工作性能,结果表明此巴伦在工作频带内能够承 受500 W 的功率。     

等离子体限幅器对雷电防护效果的试验分析北大核心CSCD

雷电对于各类装备及民用系统的电子设备有着极大的破坏作用,引起射频系统损坏的主要为感应雷,而现有的设备无法满足射频系统的防雷需求。文章对微波防护用等离子体限幅器的雷电防护特性进行了研究并开展了相关试验,结果表明,等离子体限幅器可以起到雷电防护的作用,对于感应雷电波形的幅值及波形均有着一定的限制,在等离子限幅器后接入PIN限幅器所形成的级联防护器件对后方的电路起到了有效的防护作用。     

硅基片上集成二维光控多波束形成的研究

传统雷达系统在当今日益复杂的电磁环境中面临严重挑战,而集成微波光子学技术可突破传统雷达的技术瓶颈,具有大带宽、高分辨率、高复用度、高集成化等技术优势。本文基于集成微波光子技术,研制了一款硅基集成二维光控多波束形成系统样机,提出了一种基于二氧化硅平面光波导的片上集成二维光控多波束形成系统架构,结合流片加工平台完成了关键光芯片的设计流片和封装测试,最终完成系统样机整机联调测试,并对实验结果进行理论计算处理,验证了硅基集成波束形成系统的关键性能指标。系统具有大瞬时带宽、二维同时多波束、各波束多波位独立扫描的能力,与此同时兼具硅基光子集成技术的小型化、轻量化、低成本等优势,试验结果验证了集成微波光子技术应用于雷达系统的先进性和应用潜力。     

一种Ku波段综合馈电多功能板的研制

基于多层微波数字复合基板层叠互联技术,研制的Ku波段综合馈电多功能板集成了射频收发网络、电源分配网络、阵面波控及波控分配网络,主要负责16个片式T/R组件的功率分配与合成,同时为各T/R组件提供电源及控制信号。文中对多功能板的架构设计、工作原理进行了说明,重点介绍了各微波垂直互联电路和射频收发网络的设计,最后加工并测试了验证样件,测试结果良好。收发网络总口驻波＜1.9,分口驻波＜1.3,插损＜16 dB,相邻端口的隔离度＞20 dB,且幅度一致性≤0.602 dB,相位一致性≤6.429°。工程应用可行性和实用性得到了验证。     

A path planning model based on nested regular hexagons using weighted centroid localization

In many wireless sensor network (WSN) applications, the location of a sensor node is crucial for determining where the event or situation of interest occurred. Therefore, localization is one of the critical challenges in WSNs. Mobile anchor node assisted localization (MANAL) is one of the promising solutions for the localization of statically deployed sensors. The main problem in MANAL localization is that the path planning of the mobile anchor (MA) node should be done so that the localization error in the network will be minimal and that all unknown nodes in the network are covered. This paper proposes a new path planning approach called nested hexagons curves (NHexCurves) for MANAL. NHexCurves guarantees that it will receive messages from at least three non-collinear anchors to locate all unknown nodes in the network. The proposed model has compared six different path planning schemes in the literature using weighted centroid localization (WCL). In these comparisons, first of all, localization errors of the models are compared using some statistical concepts. Second, the variation of the localization error according to parameters such as resolution (R) and the standard deviation of noise (σ) is observed. Then, with similar approaches, the standard deviation of errors, localization ratio, scalability performances, and finally, path lengths of the models are examined. The simulation results show that the NHexCurves static path planning model proposed in this study stands out compared to other models with high localization error and localization ratio performance, especially at low resolutions, due to its path design. At the same time, the lowest error values according to σ are obtained with the proposed model among all models considered.     

白藜芦醇分子的转动惯量和电偶极矩

通过分子轨道理论和杂化轨道理论推断出较稳定的白藜芦醇分子是平面型分子,然后根据白藜芦醇分子结构特点计算了该化合物的一种稳定异构体的转动惯量,用矢量合成法计算了其电偶极矩,为微波辅助白藜芦醇萃取理论研究提供转动惯量和电偶极矩的数据.     

Solid-supported Hantzsch—Biginelli reaction for syntheses of pyrimidine derivatives

The microwave-assisted dry media technology was utilized for the synthesis of some novel derivatives in the Hantzsch—Biginelli reaction. In this eco-friendly approach, the usage of organic solvents and hazardous reagents resulting in corrossion of materials was minimized, giving high yields of products within a short reaction time.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。