一种精准数控STC设计方法

介绍了雷达接收机中STC控制的产生背景、原理及方法,采用MATLAB语言进行仿真,重点介绍了一种基于电控衰减器作为受控部件的数字STC控制曲线的精确设计方法,并提出了雷达STC的设计和使用原则。     

复杂形体目标激光散射特征测量系统的研制

复杂形体目标激光散射特征的测量系统中，利用反射式离轴光路满足了可见到远红外波段的测量需要，通过大孔径（250mm）物方远心接收光路实现了对实际远场的模拟测量，以光滑镀金球体作为标准器，可直接获得任意目标散射截面的绝对值。在0．6328、1．06和10．6μm三个波段针对标准器的实测结果表明，平均误差小于4．95％。     

Design,synthesis, and characterization of main‐chain,aromatic polyesters based on 3,4‐ethylenedioxythiophene

A series of new thermoplastic polyesters based on 3,4‐ethylenedioxythiophene (EDOT) with flexible aliphatic spacers have been synthesized and characterized for the first time. The thermal properties of these polyesters based on EDOT are comparable to those of conventional polyesters based on the 1,4‐phenyl unit, indicating that EDOT is a viable replacement for the phenyl units. The glass‐transition and melting‐transition temperatures decrease monotonically with an increase in the spacer length. Theoretical calculations have revealed that the core angle for EDOT is comparable to that of unsubstituted thiophene and hence should be compatible with the formation of the mesophase. This has been confirmed experimentally by the synthesis of a main‐chain, thermotropic, liquid‐crystalline polyester based on EDOT that exhibits fluid birefringence. In fact, this is the first report in which a main‐chain, liquid‐crystalline polymer based on 3,4‐disubstituted thiophene has been successfully designed and synthesized. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3479–3486, 2006     

Ab initio calculations of small hydrides including electron correlation

Five different structures of CH₅ ⁺ and one structure of CH₅ ^– are calculated using a gaussian basis both in the SCF approximation and with the inclusion of electron correlation in the independent electron pair approximation (IEPA). While on SCF level the C _sstructure of CH₅ ⁺ has to lowest energy, the energy difference between the C _sand C _2vstructures becomes negligible if correlation is included. In contrast to this the approach of a proton to CH₄ at large and intermediate distances is most favorable towards a corner of the CH₄ tetrahedron which means a structure. The decomposition of CH₅ ⁺ into CH₃ ⁺ and H₂ requires 20kcal/mol on SCF level and 40 kcal/mol if correlation is included.     

Studies of solvent effects

The effect of water on the conformational preferences of acetylcholine has been studied within the discrete, the continuum and the combined discrete-continuum models described in parts I and II of this series. All the models lead to the conclusion that the trans-gauche form which is, following refined quantum-mechanical computations, the intrinsically preferred one and the one observed in the crystal of acetylcholine and of a number of analogues should remain also the preferred conformation in water. This result agrees with NMR studies. The results of the empirical discrete model used here compare favorably to those obtained by an ab initio super-molecule treatment. The continuum model utilized here represents a net improvement above such models utilized in other works.     

Reactions of Hydroxyazolidines with π-Donor Heterocycles. 3. Reaction of 1-Acetyl-5-hydroxypyrazolidines with Oxindoles

The reaction of oxindoles with 5-hydroxypyrazolidines on the surface of potassium fluoride-modified alumina leads to 3-(5-pyrazolidinyl)oxindoles. The structure of these products was studied.     

Excess molar enthalpy of binary mixtures of hexane+ethyl benzene, <Emphasis Type="Italic">o</Emphasis>-xylene, <Emphasis Type="Italic">m</Emphasis>-xylene and <Emphasis Type="Italic">p</Emphasis>-xylene at 298.15 K

Summary This paper reports excess molar enthalpies of the binary systems hexane+ethyl benzene, hexane+o-xylene, hexane+m-xylene and hexane+p-xylene at 298.15 K and atmospheric pressure, over the whole composition range. The data was measured directly using a Calvet microcalorimeter. The excess magnitude was correlated to a Redlich-Kister type equation for each mixture. Also, we will discuss the results for the four mixtures studied here and by comparison with the same binary systems but containing propyl propanoate as first component. Finally, we will correlate our results with the Nitta-Chao and the three UNIFAC theoretical approximations.     

Ultrafast Switchable Passive Radiative Cooling Smart Windows with Synergistic Optical Modulation

Switchable passive radiative cooling (PRC) smart windows can modulate sunlight transmission and spontaneously emit heat to outer space through atmospheric transparent window, presenting great potential in building energy conservation. However, realizing stable and on-demand control of the cooling efficiency for PRC materials is still challenging. Herein, an electro-controlled polymer-dispersed liquid crystal (PDLC) smart window showing PRC property is designed and prepared by adding mid-infrared emitting reactive monomers into the conventional PDLC matrix. It is found that not only the electro-optical properties but also the PRC efficiency of PRC PDLC film are tunable by regulating the content of the mid-infrared emitting components, film thickness, and micromorphology. This advanced PRC PDLC material achieves a near/sub-ambient temperature when the solar irradiance is below 400 W m⁻² and can dynamically manage daytime cooling efficiency. Importantly, its PRC efficiency is capable of being tuned in an on-demand and ultrafast millisecond-scale way, whose controllable transparency enables multistage heat regulation. This study is hoped to provide new inspiration in the preparation of advanced optical devices and energy-efficient equipment.     

基于问题导向的在线教学研究

本文以“电力电子技术基础”的在线教学为例,开展以学生为中心的基于问题导向的教学方法优化实践。教学过程中,结合学校教师教学发展中心组织的EMI教师培训,对教学计划、教学重点进行了大力度的改进;同时,结合过程中与学生的交互、期末学生的反馈以及同行专家的建议,对本次的优化改进进行了教学分析、分析、反思和总结,以期不断提升本课程的教学质量,并为其它工科类课程的教学优化提供借鉴。