Cross-Layering Approaches in Wireless Ad Hoc Networks

Wireless ad hoc networks are temporary formed, infrastructureless networks. Due to the unstable channel conditions and network connectivity, their characteristics impose serious challenges in front of network designers. The layering approach to network design does not fit the ad hoc environment well. Therefore, various cross-layering approaches, where protocol layers actively interact, exchange inherent layer information and fine tune their parameters according to the network status are becoming increasingly popular. This paper presents an in-depth analysis of the latest cross-layering approaches for wireless ad hoc networks supported by several examples. A special emphasis is put on the link and network layer related cross-layer designs. Several link adaptation and efficient service discovery schemes are elaborated through analytical and simulation studies. Their performance shows the potentials of the cross-layering for boosting system characteristics in wireless ad hoc networks. Liljana Gavrilovska currently holds a position of full professor at Faculty of Electrical Engineering, University “St. Cyril and Metodij” – Skopje, Macedonia. She is chief of Telecommunications Laboratory and teaches undergraduate courses in telecommunication networks, data transmission and switching and traffic theory, and graduate courses in wireless, mobile and personal networks, teletraffic engineering and planning, and broadband multiservices networks. In 2000 she joined the Center for PersonKommunikation, Aalborg University, Denmark, as a visiting professor and during 2001--2002 she held a position of associate research professor at the same university. Currently she holds a part-time position of associated research professor with Center for Teleinfrastructur (CTIF). Prof. Gavrilovska was involved in several EU (ACTS ASAP, IST PACWOMAN, MAGNET, TEMPUS) and national/international projects. She published numerous conference and journal papers and participated in several workshops. At the moment she is working on the book “Ad Hoc Networking Towards Seamless Communications” together with prof. R. Prasad. Her research interests include wireless and personal area networks, ad hoc networking, networking protocols, traffic analysis, QoS, and optimization techniques. She is a senior member of IEEE and serves as a Chair of Macedonian Communication Chapter.     

Measurements and simulations of particle dispersion in a turbulent flow

A particle imaging technique has been used to collect droplet displacement statistics in a round turbulent jet of air. Droplets are injected on the jet axis, and a laser sheet and position-sensitive photomultiplier tube are used to track their radial displacement and time-of-flight. Dispersion statistics can be computed which are Lagrangian or Eulerian in nature. The experiments have been simulated numerically using a second-order closure scheme for the jet and a stochastic simulation for the particle trajectories. Results are presented for non-vaporizing droplets of sizes from 35 to 160 μm. The simulations have underscored the importance of initial conditions and early droplet displacement history on the droplet trajectory for droplets with large inertia relative to the turbulence. Estimates of initial conditions have been made and their effect on dispersion is quantified.     

On a new stochastic global optimization algorithm based on censored observations

In this paper a new algorithm is proposed for global optimization problems. The main idea is that of modifying a standard clustering approach by sequentially sampling the objective function while adaptively deciding an appropriate sample size. Theoretical as well as computational results are presented.     

Global optimization by random perturbation of the gradient method with a fixed parameter

The paper deals with the global minimization of a differentiable cost function mapping a ball of a finite dimensional Euclidean space into an interval of real numbers. It is established that a suitable random perturbation of the gradient method with a fixed parameter generates a bounded minimizing sequence and leads to a global minimum: the perturbation avoids convergence to local minima. The stated results suggest an algorithm for the numerical approximation of global minima: experiments are performed for the problem of fitting a sum of exponentials to discrete data and to a nonlinear system involving about 5000 variables. The effect of the random perturbation is examined by comparison with the purely deterministic gradient method.     

集值映射的切导数与向量优化问题的最优性条件

利用集值映射切导数与半可微概念，给出了无约束与具约束的集值向量优化问题局部真有效解与局部强有效解的最优性条件。     

Particle Size Analysis by Transmission Fluctuation Spectrometry: Experimental Results Obtained with a Gaussian Beam and Analog Signal Processing

Transmission fluctuation spectrometry (TFS) is a method for the analysis of particle size distributions based on the statistical fluctuations of a transmission signal. Complete information on the PSD and particle concentration can be retrieved by a special transformation of the transmission signal, whereby the expectancy of the transmission square (ETS) is determined after the signal has been subjected to a procedure of spatial and temporal averaging. By varying the averaging parameters over a wide range, a spectrum of ETSs is obtained and introduced into a linear equation system, which yields the PSD. In the experimental realization presented here, variable temporal averaging is realized in the frequency domain with a series of low pass filters at different cutoff frequencies while spatial averaging inevitably occurs as the particles pass through a focused Gaussian beam of finite cross section. Experimental results on spherical particles (glass beads) and non‐spherical particles (SiC) are presented. The PSDs are resolved in 30 intervals within a particle size range from 1–1000 μm, employing a modified Chahine inversion algorithm. So far, the measurements are limited to moderate particle concentrations. Some influences affecting the measurements, especially for higher particle concentrations, are discussed in detail.     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

三脉冲不等强度激光片光源的研制及应用

本文报道了最近研制成功三脉冲不等强度调Q红宝石激光片光源系统.利用小颗粒对片光源90°方向的散射光对动态颗粒场进行高速摄影,从底片中能够精确直观地判断微小颗粒的瞬时分布、运动方向、速度和加速度情况.     

Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006