藻类植物中钙、镁、铁、锰、铜和锌含量分析

本文采用火焰原子吸收光谱法测定了七种藻类植物中钙 ,镁 ,铁 ,锰 ,铜 ,锌六种元素的含量。结果表明 ,藻类植物中含有较丰富的钙 ,镁 ,铁 ,锰 ,锌元素 ,其含量由大到小顺序为Ca >Mg >Fe >Zn >Mn >Cu ,尤以钙的含量最为丰富 ,铜含量较少。本实验结果为探讨藻类植物作为资源开发利用提供了有用数据。     

金属包覆平板波导模式特性的有限元法分析

采用有限元法（FEM）分析了具有复数折射率的金属包覆介质波导的模折射率与模场分布情况。计算了具有损耗层的6层介质平板波导模折射率，并与解析解比较，二者有较好的一致性；分析了金属包覆3层平板波导中TM模折射率与波导芯厚度的变化关系，计算了金属包覆5层平板波导中TM模折秧经与金属层厚度的变化关系，并结合对模场分布的分析对模式进行了定性判断，给出了其模式演变过程。     

Structural optimization design for large mirror

The system design must be started from the concept with low cost and high performance. In this point, the topological shape of the structure is very important in the view of the structural rigidities and light-weight design.In this paper, the optimization methodology is presented in the design stage of the large optical mirror. We obtain the optimal layout through the topology optimization and then design the details through the size or shape optimization for structural rigidity.     

Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

热传导型半导体瞬态问题特征变网格有限元法及其分析

热传导型半导体器件的瞬时状态由四个方程的非线性偏微分方程组的初边值问题所决定，其中电子位势方程是椭圆型的，电子和空穴浓度方程是对流扩散型的，温度方程为热传导型的。本文提出解这类问题的特征变网格有限元法，并进行了理论分析，在一定条件下，得到了某种意义下的最佳L^2误差估计结果。     

A Nonconforming Arbitrary Quadrilateral Finite Element Method for Approximating Maxwell's Equations

The main aim of this paper is to provide convergence analysis of Quasi-Wilson nonconforming finite element to Maxwell's equations under arbitrary quadrilateral meshes.The error estimates are derived,which are the same as those for conforming elements under conventional regular meshes.     

A parallel version of the preconditioned conjugate gradient method for boundary element equations

The parallel version of precondition techniques is developed for matrices arising from the Galerkin boundary element method for two-dimensional domains with Dirichlet boundary conditions. Results were obtained for implementations on a transputer network as well as on an nCUBE-2 parallel computer showing that iterative solution methods are very well suited for a MIMD computer. A comparison of numerical results for iterative and direct solution methods is presented and underlines the superiority of iterative methods for large systems.     

Implementation of multipoint connections in an ATM switching network

This paper presents the problems in the implementation of multipoint connections at switching level using the example of an ATM switching network. By choosing the proper routeing mechanism and the appropriate architecture of the switching element, a switching network can gradually be adapted to an increasing share of multipoint traffic. The first section describes the problems with the handling of multipoint connections within a multiple stage connection oriented switching network. In particular this refers to the routeing of the cells through the switching network. Several alternatives on this issue are discussed. Both, the selected approach based on a differentiated self-routeing mechanism and the corresponding cell format are introduced. In the second part of this article several switch architectures are compared in respect of their multipoint capability. It is demonstrated that at present the most promising solution are switching elements based on the principle of central buffering. A single chip solution using this concept is employed in the presented switching network.     

用边界元法提取VLSI版图电阻

介绍了ＶＬＳＩ版图验证中电阻提取的基本原理和主要方法，给出了一种新颖的基于边界元法的电阻提取算法。该算法采用变节点单元，较好地解决了实际问题中经常出现的角点问题。通过应用该算法对几个实例进行提取，证明使用本文的算法不仅在精度上而且在占用ＣＰＵ时间上都取得了令人满意的效果     

强激光的时间整形和空间整形——利用双折射透镜组实现激光束的空间整形

本文使用琼斯矩阵方法对双折射透镜组空间整形系统的光强透射率分布和工作特性进行了分析,并讨论了工程设计中参数的选择以及加工误差带来的影响等有关问题.