Salt Concentration Effects in Planar Light‐Emitting Electrochemical Cells

Incorporation of ions in the active layer of organic semiconductor devices may lead to attractive device properties like enhanced injection and improved carrier transport. In this paper, we investigate the effect of the salt concentration on the operation of light‐emitting electrochemical cells, using experiments and numerical calculations. The current density and light emission are shown to increase linearly with increasing ion concentration over a wide range of concentrations. The increasing current is accompanied by an ion redistribution, leading to a narrowing of the recombination zone. Hence, in absence of detrimental side reactions and doping‐related luminescence quenching, the ion concentration should be as high as possible.     

Addition reaction and characterization of chlorotris(triphenylphosphine)iridium(I) on silicon(1 1 1) surfaces

Studies were performed to determine the chemical addition of a metal complex molecule, chlorotris(triphenylphosphine)iridium(I), on hydrogen passivated Si(1 1 1) surfaces to form a self-assembled monolayer (SAM). The iridium complex was synthesized prior to chemical addition, for which modified reaction conditions were chosen. Following addition, the silicon surfaces were characterized with X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The XPS results revealed that the surfaces consisted of the expected elemental percentages and that the iridium has a slightly higher success rate at attaching to oxide-free surfaces. XPS data also strongly indicate that the iridium complex remained intact upon chemisorption and did not decompose during the addition reaction. CV data show a difference between iridium treated surfaces and control samples. Hydrogen passivated wafers with iridium complex were much more conductive than those which were terminated with just an oxide or with an oxide and iridium complex. Furthermore, no free iridium reagent was detected as an additional feature in the current profile, indicating there was no physisorbed layer.     

Solid-phase Pd-catalysed cross-coupling methods for the construction of π-conjugated peptide nanomaterials

We describe the development of two procedures for the synthesis of peptides that are embedded with a variety of π-conjugated semi-conducting oligomers. These procedures utilise solid-phase variants of classical palladium-catalysed cross-couplings commonly used to prepare π-conjugated oligomers. The resulting peptide–π–electron hybrids are soluble in aqueous media and self-assemble to produce 1D nanostructures, simultaneously forming networks of π-stacked conduits. The procedures have allowed for the inclusion of complex chromophores including mixed aryl units, ethynylene linkers and sexithiophenes where the latter peptide's nanostructures demonstrated substantial conductivity when employed as an active layer in a field-effect transistor.     

A ratiometric fluorescent probe with high sensitivity and selectivity for phosgene sensing in solution and gas

Phosgene has attracted wide attention because of its important applications and value in modern industry, agriculture, and other fields, though it easily leaks and is difficult to detect. In this work, we designed and synthesized a naphthalimide-based fluorescent probe, which is easy to prepare, stable, and able to discriminate between phosgene, acetyl chloride, oxalyl chloride, thionyl chloride, phosphorus oxychloride, and tosyl chloride. Our results indicate that the probe can react with phosgene selectively and sensitively, showing remarkable ratiometric fluorescence changes. Furthermore, the probe can be made into test strips, which can determine phosgene in air effectively. The present work provides a novel class of naphthalimide-based derivatives with potential application in phosgene sensing in real time simply and safely with further optimization.     

Synthetic Organic Design for Solar Fuel Systems

From the understanding of biological processes and metalloenzymes to the development of inorganic catalysts, electro‐ and photocatalytic systems for fuel generation have evolved considerably during the last decades. Recently, organic and hybrid organic systems have emerged to challenge the classical inorganic structures through their enormous chemical diversity and modularity that led earlier to their success in organic (opto)electronics. This Minireview describes recent advances in the design of synthetic organic architectures and promising strategies toward (solar) fuel synthesis, highlighting progress on materials from organic ligands and chromophores to conjugated polymers and covalent organic frameworks.     

Triclosan‐based antibacterial paper reinforced with nano‐montmorillonite: a model nanocomposite for the development of new active packaging

In this study, a suitable method is reported to produce reinforced antibacterial paper packaging using the antimicrobial triclosan (TC) and organically modified montmorillonite (OMMT) as “model” compounds. Direct incorporation of TC at a concentration of 1 wt% and OMMT at concentrations of 1, 4, 7, and 10 wt% into papers was performed via coating process, and the resulting materials were characterized by in vitro antimicrobial assays, thermogravimetric analysis, scanning electron microscopy, mechanical tests, and water vapor transmission rate determinations. It was demonstrated that the presence of 1% TC in the coated papers exhibited inhibitory effects against Staphylococcus aureus and Escherichia coli. It was also pointed out that increases of approximately 30% in the tensile strength of commercial paper are obtained by using the OMMT at a concentration of 1 wt%. Water barrier property and thermal stability of paper were also enhanced because of the coating process and the incorporation of OMMT. The results from this study demonstrate that OMMT has a great potential to be incorporated into coating formulations to obtain antibacterial‐coated papers with improved properties for various packaging applications. Copyright © 2011 John Wiley & Sons, Ltd.     

A new tuning procedure for the DTL RF field pattern

The DTL tank is a multi-cell cavity.In a fabricated tank,the measured average axial field E0 for each cell may obviously deviate from the designed value.It is generally thought the deviation is due to the errors in fabrication and assembly.But it is not always true.In this paper,it is shown that the deviation may already exist before fabrication in some cases.It is partly due to the imperfection of the current design procedures.A new design method is introduced to reduce the deviation in the design stage.     

Electron Transfer around a Molecular Corner

The distance dependence of electron transfer (ET) is commonly investigated in linear rigid rod‐like compounds, but studies of molecular wires with integrated corners imposing 90° angles are very rare. By using spirobifluorene as a key bridging element and by substituting it at different positions, two isomeric series of donor‐bridge‐acceptor compounds with either nearly linear or angled geometries were obtained. Photoinduced ET in both series is dominated by rapid through‐bond hole hopping across oligofluorene bridges over distances of up to 70 Å. Despite considerable conformational flexibility, direct through‐space and through‐solvent ET is negligible even in the angled series. The independence of the ET rate constant on the total number of fluorene units in the angled series is attributed to a rate‐limiting tunneling step through the spirobifluorene corner. This finding is relevant for multidimensional ET systems and grids in which individual molecular wires are interlinked at 90° angles.