Interaction of sodium cholate with dioctadecyldimethylammonium chloride vesicles in aqueous dispersion

Mixtures of dioctadecyldimethylammonium chloride (DODAC) cationic vesicle dispersions with aqueous micelle solutions of the anionic sodium cholate (NaC) were investigated by differential scanning calorimetry, DSC, turbidity and light scattering. Within the concentration range investigated (constant 1.0 mM DODAC and varying NaC concentration up to 4 mM), vesicle → micelle → aggregate transitions were observed. The turbidity of DODAC/NaC/water depends on time and NaC/DODAB molar concentration ratio R. At equilibrium, turbidity initially decreases smoothly with R to a low value (owing to the vesicle–micelle transition) when R = 0.5–0.8 and then increases steeply to a high value (owing to the micelle–aggregate transition) when R = 0.9–1.0. DSC thermograms exhibit a single and sharp endothermic peak at T_m ≈ 49 °C, characteristic of the melting temperature of neat DODAC vesicles in water. Upon addition of NaC, T_m initially decreases to vanish around R = 0.5, and the main transition peak broadens as R increases. For R > 1.0 two new (endo- and exothermic) peaks appear at lower temperatures indicating the formation of large aggregates since the dispersion is turbid. All samples are non-birefringent. Dynamic light scattering (DLS) data indicate that both DODAC and DODAC/NaC dispersions are highly polydisperse, and that the mean size of the aggregates tends to decrease as R increases.     

利用AFM和SNOM对淋巴细胞膜表面超微结构及其光学性质的初步研究

利用原子力显微镜(Atomic Force Microscopy，AFM)对淋巴细胞表面形貌进行了形态学的初步研究，观察到了其膜表面其他显微技术所不能发现的超微结构．同时也运用扫描近场光学显微镜(Scanning Near field Optical Microscopy，SNOM)对淋巴细胞进行成像，观察了其对光的透射、吸收等光学性质，并对两种成像方法进行了比较．研究发现：淋巴细胞膜表面凹凸不平，分布着大量直径几十到几百纳米不等的小颗粒；淋巴细胞中央部位有自发荧光现象．结果表明，AFM和SNOM可作为进一步探讨淋巴细胞的结构与功能关系的有力工具．     

低电平扫描电流高强辐射场试验方法研究

低电平扫描电流试验(LLSC)是飞机高强辐射场(HIRF)试验的一部分,其实质是在2~400 MHz 频段 内对飞机进行电磁辐照,以确定外部HIRF 环境与设备线束感应电流之间的传递函数。基于RTCA/ DO-160G 和SAE ARP5583A 标准建立HIRF 测试环境,通过对AC312E 直升机开展低电平扫描电流试验,得到了线束传递函数随频 率、天线极化方式、电磁辐照方向、线束布置的变化规律并分析了其影响机理。结果表明:发射天线以不同极化方式 辐照机体时,不同布置的线束其传递函数有一定差别;发射天线以垂直极化在0°方向辐照时,行李舱附近右发动机 控制单元(EECUR)线束的传递函数比位于驾驶舱的座舱显示器(MFD)线束的传递函数要小;发射天线以垂直极化 方式在不同方向辐照机体时,EECUR 线束在某些频段下在右侧90°方向辐照比左侧270°方向辐照的传递函数要大。 所得结论可为直升机适航符合性验证和低电平扫描电流试验的开展提供参考与支撑。     

Tailoring of Photoluminescence Properties in All-Vacuum Deposited Perovskite via Ruddlesden–Popper Faults

Ruddlesden–Popper (RP) faults are well known in oxide perovskites, and are also observed in promising metal halide perovskites. However, the effect of RP faults on optical properties of perovskite has not been systematically investigated. In this study, it is found that RP faults are common planar faults in all-vacuum deposited CsPbBr₃-based perovskite polycrystal thin films, and the density of RP planar faults can be greatly increased by non-stoichiometric composition (Cs-rich) as well as reduced dimensionality (quasi-2D) strategies. The photoluminescence (PL) measurement reveals monotonically increasing peak intensities with higher densities of RP planar faults from Cs-rich, quasi-2D to Cs-rich & quasi-2D samples. The corresponding atomic-scale differential phase contrast maps indicate strongly confined charges within the RP planar fault network, which explains well the relationship between PL enhancement and the density of RP planar faults, and offers an alternative pathway for tailoring the optoelectronic properties of perovskite.     

一种3D眼镜虚拟试戴系统的实现

针对人脸图像试戴3D眼镜过程中存在的镜腿遮挡人脸问题,文中提出一种基于人脸图像的3D眼镜虚拟试戴技术。利用构建的人脸形状的三维模型,使其在虚拟试戴中对镜腿起到消隐作用,解决镜腿的遮挡问题。文中对输入的人脸图像进行关键点检测,结合Graham扫描法求得人脸形状的凸多边形,利用平移扫描构建人脸形状的三维模型。此外,文中根据定位人脸图像上的关键点以及姿态估计后对三维眼镜模型的变换,将眼镜模型佩戴到人脸图像上。实验结果表明,该方法对于多视角的人脸图像实现了虚拟试戴效果,解决了多种视角下人脸图像试戴过程中镜腿的遮挡问题,虚拟试戴中镜腿遮挡平均准确率为94.5%,遮挡精度较高。     

端羟基芳香酯二醇扩链的聚氨酯－酯的DSC研究

端羟基芳香酯二醇扩链的聚氨酯－酯的ＤＳＣ研究陈静，余学海，杨昌正（南京化工学院应化系南京２１０００９）（南京大学化学系南京２１００９３）关键词嵌段聚醚聚氨酯－酯，结晶性，微观相结构，差示扫描量热法，形态结构众所周知，聚氨酯嵌段共聚物是一类结构特殊、用...     

Photoinitiators with functional groups. V. New water‐soluble photoinitiators containing carbohydrate residues and copolymerizable derivatives thereof

The synthesis of new water‐soluble photoinitiators (PIs) based on hydroxyalkylphenones, benzophenones, and thioxanthones with carbohydrate residues such as glucose, cellobiose, and 1‐amino‐1‐deoxy‐D ‐glucitol (glucamine) is described. In addition, selected initiators were reacted with methacryloyl chloride to obtain copolymerizable initiators with improved migration stability. Results from photo differential scanning calorimetry and gel‐content measurements in commercially available water‐thinnable and emulsion‐type resins as well as 2‐hydroxyethyl acrylate are included. Glucose‐modified PIs gave the best results with respect to compatibility with the resin, reactivity, and gel content. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1504–1518, 2002     

Miniature electrophoresis for speed and productivity

Attempts to miniaturize electrophoresis (EP) to save time or enhance productivity and efficiency remains a challenge for science and industry. Other advantages of miniaturization include: increased sensitivity, saving of reagents, greater yield of data, and enabling studies where only small samples are available. Since electrophoresis that takes hours may be reduced to a matter of minutes, the limitations of miniaturization in clinical, industrial, and research applications are evaluated. Clinical electrophoresis (EP) on cellulose acetate media can be performed in 3.5 min instead of 20–45 min and on SDS polyacrylamide gels in 15–30 min compared with conventional 3–8 h.     

Non-stoichiometry of YBa2Cu3O7-d Observed by Repeated Temperature Scanning

Repeated temperature scanning method was applied to observe non-stoichiometry of YBa₂Cu₃O₇-d, and interesting results were obtained. Two simultaneously occurring processes were separately observed in mass change; one is a fast process and the other is slow, so that their responses to the temperature change are quite different from each other. The fast process follows the cyclic temperature change, but the slow process is observed to be a gradual mass change. Kinetic behaviors of these two processes are also made clear by plotting the mass vs. the temperature. Furthermore, a hysteresis loop was observed in the plot of the mass vs. the temperature in a high temperature range presumably due to the third process, and it depends on the heating and cooling rates. This revised version was published online in July 2006 with corrections to the Cover Date.     

Chromatographie par complexe de transfert de charge. Application à l'analyse d'hydroliquéfiats du charbon par HPLC

Résumé L'analyse de coupes lourdes (huile de distillation sous vide et huile issue du séparateur à chaud) provenant de l'hydroliquéfaction catalytique du charbon a été réalisée par mise en ouvre de différentes techniques chromatographiques. L'identification des principales structures résulte de l'application de la chromatographie par couplage de transfert de charge en mode HPLC et des spectroscopies UV et de masse.

---

Donotor-acceptor complex chromatography —Application to analysis of coal liquefaction products by HPLC

Summary A Vacuum gas oil and the corresponding residue of a coal liquefaction product were investigated by means of HPLC and MS. Nearly a complete identification was performed by chromatographic, UV-spectroscopic methods and MS.