Detection and assessment of citrus tristeza virus antigens by computer-aided scanning densitometry

Citrus tristeza virus (CTV) extracted from Etrog citron (C.medica L.) was immunoprecipitated. The immunoprecipitate was fractionated by SDS-PAGE and western blotted onto nitrocellulose. The CTV antigens were determined by immunoblot analysis using rabbit anti-CTV IgG, and the protein-band pattern exhibited on the nitrocellulose was assessed by soft-laser scanning densitometry. The densitometric tracing revealed the presence of bands that were not visible to the naked eye. Using the superimposition mode of the instrument, it was also revealed that the protein-band patterns of different CTV samples were not identical. Computer-aided soft-laser scanning densitometry proved to be a powerful approach in the detection and assessment of protein bands revealed on nitrocellulose immunoblots, which we were previously unable to do employing conventional methods.     

Chromatographie par complexe de transfert de charge. Application à l'analyse d'hydroliquéfiats du charbon par HPLC

Résumé L'analyse de coupes lourdes (huile de distillation sous vide et huile issue du séparateur à chaud) provenant de l'hydroliquéfaction catalytique du charbon a été réalisée par mise en ouvre de différentes techniques chromatographiques. L'identification des principales structures résulte de l'application de la chromatographie par couplage de transfert de charge en mode HPLC et des spectroscopies UV et de masse.

---

Donotor-acceptor complex chromatography —Application to analysis of coal liquefaction products by HPLC

Summary A Vacuum gas oil and the corresponding residue of a coal liquefaction product were investigated by means of HPLC and MS. Nearly a complete identification was performed by chromatographic, UV-spectroscopic methods and MS.

     

Large Enhancement of the Single-Molecular Conductance of a Molecular Wire through a Radical Substituent

The single-molecular conductance between two π-conjugated wires with and without a radical substituent has been compared. Specifically, methyl- and iminonitroxide-substituted 4-(biphenyl-4-yl)pyridine wires bound onto a porphyrin template were subjected to scanning tunneling microscopy (STM) apparent-height measurement at the interface between highly oriented pyrolytic graphite (HOPG) and octan-1-oic acid. Statistical analysis of the STM images revealed that the radical-substituted wire has 3.2±1.7-fold higher conductance than the methyl-substituted reference. Although density functional theory (DFT) calculation suggests that only 17 % of the SOMO is distributed on the wire moiety, the effect was significant. This study presents the potential of radical substituents to achieve high conductivity in molecular wires.     

新工科背景下大型仪器培训体系的创新与实践——以扫描电镜为例

针对传统大型仪器培训体系存在的定位不准、内容不足、方案陈旧等局限性,结合“新工科”人才培养理念,围绕开放共享、科研导向、育人为本、安全高效的大型仪器培训方针,充分挖掘大型仪器设备的资源价值,释放科技资源潜力,初步建立了以扫描电镜为主体的远程培训、实体培训、应用培训、动态监管“四位一体”的新型大型仪器培训体系,形成了一个闭环的、高效的大型仪器培训管理模式,具有一定的推广和借鉴价值。     

Effects of post-deposition annealing on chemical composition of SiNx film in SiO2/SiNx/SiO2/Si stacked structure

To systematically evaluate the quality of SiN_x films in multi-stacked structures, we investigated the effects of post-deposition annealing (PDA) on the film properties of SiN_x within the SiO₂/SiN_x/SiO₂/Si stacked structure by performing X-ray photoelectron spectroscopy (XPS), X-ray reflectivity (XRR), Fourier transform infrared (FT-IR) spectroscopy, and scanning transmission electron microscope–electron energy loss spectroscopy (STEM-EELS) analyses. The XPS results showed that PDA induces the oxidation of the SiN_x layer. In particular, new finding is that Si-rich SiN_x in the SiN_x layer is preferentially oxidized by PDA even in multi-stacked structure. The XRR results showed that the SiN_x layer becomes thinner, whereas the interface layer between the SiN_x layer and Si becomes thicker. It is concluded by STEM-EELS and XPS that this interface layer is SiON layer. The density of N–H and Si–H bonding within the stacked structure strongly depends on the PDA temperature. Our study helps elucidate the properties of SiN_x films in stacked structures from various perspectives.     

Nanoscale imaging of oxidized copper foil covered with chemical vapor deposition-grown graphene layers

Characterization of the geometrical and structural characteristics of oxidized Cu area in high resolution is crucial for tracking the change in morphology, exploring interactions between graphene layers and Cu substrates and revealing the mechanism for the orientation-dependent oxidation of Cu. Here, we reported experimental results on nanoscale imaging of natural oxidation of the polycrystalline Cu substrate coated by partial-coverage chemical vapor deposition (CVD)-grown graphene stored in dryer under ambient conditions for up to 10 months. Scanning electron microscope (SEM), together with atomic force microscope (AFM), Raman, and X-ray photoelectron spectroscopy (XPS), was used for systematically studying the morphological and compositional changes at nanoscale during oxidation. The appearance of oxidized Cu substrates could be unambiguously distinguished from the unoxidized regions based on their distinctly different morphologies in SEM images, and the underlying mechanism was discussed in detail. By analyzing a millimeter-seized polycrystalline Cu substrate, we found that the oxidation of polycrystalline Cu substrate depends sensitively on both orientation of graphene layers and Cu substrates. Furthermore, the time-dependent oxidation evolution of Cu substrate was also established, and the oxidation rate was readily determined. The findings reported here will have important implications for developing protection coatings for Cu.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Novel aromatic carboxamides from dehydroabietylamine as potential fungicides: Design,synthesis and antifungal evaluation

The present study was carried out to design and synthesize a number of novel aromatic carboxamide derivatives of dehydroabietylamine. The preliminary antifungal assay indicated that most of title compounds displayed moderate to good antifungal activity toward the six fungal strains in vitro. Compounds 3i, 3q, 4b and 4d showed significant antifungal activity against Sclerotinia sclerotiorum, with EC₅₀ values ranging from 0.067 ～ 0.393 mg/L. Compounds 3i, 4b and 4d also showed pronounced mycelial growth inhibition activities against B. cinerea and A. solani. Furthermore, in the in vivo assay, compound 4b exhibited brilliant protective activity against S. sclerotiorum-infected rape leaves. Meanwhile, the in vivo bioassay on tomato plants infected by B. cinerea showed that compound 3i and 4d displayed excellent protective activity at 200 mg/L, which were near to boscalid. Primary mechanistic study revealed that 4b could inhibit sclerotia formation as well as reduce the exopolysaccharide level. SEM and TEM analysis indicated that 4b possessed a strong ability to destroy the surface morphology of mycelia, cell structure and seriously interfere with the growth of the fungal pathogen. In addition, 4b exhibited good inhibitory activity (IC₅₀ = 23.3 ± 1.6 μM) toward succinate dehydrogenase (SDH). Molecular modeling study confirmed the binding modes between compound 4b and SDH. The above antifungal results and fungicidal mechanism study revealed that this class of dehydroabietylamine derivatives could be potential SDH inhibitors and lead compounds for novel fungicides development.     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226