HL-2M 装置环向场线圈的工程研制与调试

介绍了 HL-2M 装置环向场(TF)线圈的工程设计、关键制造工艺及其调试结果。目前，TF 线圈最大通电电流达到 42kA，对应 TF 线圈产生的磁场为 0.66T，满足 HL-2M 装置初始放电需求。      

用磁探针反演磁岛二维结构的方法及其在HL-2A装置上的应用

介绍了HL-2A装置中利用磁探针数据反演磁岛极向二维结构的新方法,以及在反演基础上建立的撕裂模动态分析方法。在实验中通过磁探针测量确定作为扰动磁场来源的扰动电流。将扰动磁通与由EFIT重建的平衡磁通叠加反演出磁岛的结构,并给出磁岛的宽度。然后,按时间顺序建构二维结构图并依次记录,之后依次展现图像就可以对磁岛进行动态分析。应用此方法进行撕裂模分析,得出了磁岛旋转与电子抗磁漂移方向相同,验证了磁岛宽度与扰动场的关系及ECRH对磁岛的抑制作用。这显示了磁探针反演磁岛结构方法的直观性,对观察并控制MHD不稳定性非常有利。     

HL-2M装置极向场线圈大截面铜导体的制造工艺研究

介绍了HL-2M装置极向场线圈所需的大截面外方内圆铜导体的规格,用二辊周期式轧管机进行冷轧的工艺技术以及所做的多项检测。用这个技术制造了具有冷却水孔道的大截面外方内圆铜管。测试结果表明,该工艺生产的外方内圆铜管在尺寸及各项性能上均满足HL-2M托卡马克装置极向场线圈的加工要求。     

HL-2M������Ȧ��ų��������ļ������

在建的HL-2M装置的环向场线圈采用了比特板式结构,介绍了采用封闭多边形电流丝模型计算分析HL-2M装置环向场线圈电磁场和纹波情况;环向场线圈电流与环向场引起的电磁力以及与极向场产生的倾覆力也做了计算.计算结果对环向场线圈的设计具有一定的参考意义.     

Protein Self‐Assembly Driven by De Novo Coiled Coils and Constructing Ag Nanoparticle‐Protein Assembly Composite with High Catalytic Activity

Construction of protein self‐assembly has drawn more and more attention for understanding the natural wisdom and producing functional biomaterial. Current efforts focus on the novel driving force, dynamic control, and functionalization. In this study, protein assembly driven by de novo coiled coils is reported. By precisely designing coiled coil sequence, dimeric antiparallel coiled coils are successfully constructed and used as a linker to drive helical protein nanostructures. Furthermore, Ag nanoparticles (NPs) are subsequently biomineralized, endowing the protein assembly ability of p‐nitrophenol hydrogenation. It is noteworthy that the Ag NPs‐protein assembly composite presents a 4.19 times higher activity than traditional hydrothermal synthesized Ag NPs because of the higher affinity with substrates. The composite also demonstrates good water stability and recyclability. This article provides a manipulative strategy to drive protein assembling and reveals the Ag‐protein assembly composite a potential biomaterial in the future.     

聚变堆加热场优化设计的单纯形法

本文叙述应用单纯形法进行托卡马克聚变堆欧姆加热场的优化设计,给出了最少导体解和最低杂散场解两个例子。该单纯形法迭代收敛较快,计算时间短。     

HL-2Mװ�û�����Ȧ�Ըеļ���㷨

介绍了一种计算HL-2M装置环向场线圈自感的简捷方法，即用多个多边形电流丝模拟环向场线圈，用两个小直线段的互感求和代替多重积分，使问题得到简化。利用HL-2A装置的放电数据拟合计算了HL-2A装置环向场线圈的自感，从而验证了方法的正确性。     

HL-2A装置上一种测量等离子体位移的新方法

描述了用非对称结构的拾取线圈测量托卡马克装置等离子体位移和极向场不对称因子的方法,介绍了HL-2A装置拾取线圈的布置和位移测量的实验结果。并把用此方法测量的等离子体位移与用其他诊断方法测量的结果进行了比较。     

EAST���ٿ�����Ȧ����Ʒ����밲װ

介绍了EAST快速控制线圈的设计参数、电磁水冷分析和安装过程。引线部分受到巨大的垂直于自身方向的震荡力,常规的有机绝缘材料不能满足要求。线圈的绝缘材料采用MgO粉末,并在引线两端增加支撑固定。水冷计算表明,铜导体和水的稳定温度与点到进水口的距离成线性关系;当线圈通电电流为20kA时,为了保证出水口的水温不被加热至100℃,水的最小流速与运行效率的关系为v≈6K。     

Dual Control of Peptide Conformation with Light and Metal Coordination

The design of a stimuli-responsive peptide whose conformation is controlled by wavelength-specific light and metal coordination is described. The peptide adopts a defined tertiary structure and its conformation can be modulated between an α-helical coiled coil and β-sheet. The peptide is designed with a hydrophobic interface to induce coiled coil formation and is based on a recently described strategy to obtain switchable helix dimers. Herein, we endowed the helix dimer with 8-hydroxyquinoline (HQ) groups to achieve metal coordination and shift to a β-sheet structure. It was found that the conformational shift only occurs upon introduction of Zn²⁺; other metal ions (Cu²⁺, Fe³⁺, Co²⁺, Mg², and Ni²⁺) do not offer switching likely due to non-specific metal-peptide coordination. A control peptide lacking the metal-coordinating residues does not show conformational switching with Zn²⁺ supporting the role of this metal in stabilizing the β-sheet conformation in a defined manner.