Synthesis of poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyl groups and its further initiation of the grafting polymerization of styrene

A new stratagem for the synthesis of amphiphilic graft copolymers of hydrophilic poly(ethylene oxide) as the main chain and hydrophobic polystyrene as the side chains is suggested. A poly(ethylene oxide) with pending 2,2,6,6‐tetramethylpiperidine‐1‐oxyls [poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide)] was first prepared by the anionic ring‐opening copolymerization of ethylene oxide and 4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl, and then the graft copolymerization of styrene was completed with benzoyl peroxide as the initiator in the presence of poly(4‐glycidyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl‐co‐ethylene oxide). The polymerization of styrene was under control, and comblike, amphiphilic poly(ethylene oxide)‐g‐polystyrene was obtained. The copolymer and its intermediates were characterized with size exclusion chromatography, ¹H NMR, and electron spin resonance in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3836–3842, 2006     

Organic phase conversion of bulk (wurtzite) ZnO to nanophase (wurtzite and zinc blende) ZnO

We describe the all-organic phase conversion of bulk commercial ZnO in the wurtzite modification to sub-30 nm ZnO that we find to be partially in the zinc blende [, a=4.568(3) Å] modification. The conversion involves refluxing ZnO in 2,4-pentanedione (acetylacetone) at 413 K to form the zinc 2,4-pentanedionate, which is decomposed by heating at 573 K in an appropriate high-temperature solvent such as dibenzylether to form nanophase ZnO. This nanophase, partially zinc blende ZnO can also be obtained in a single step by heating commercial zinc 2,4-pentanedionate in refluxing dibenzylether. Thermodiffractometry suggests that the conversion of zinc blende ZnO to wurtzite ZnO commences near 650 K.     

Physico-Chemistry of the Limestone Sulphation Process

Aspects of the mechanism of the overall reaction between CaCO₃/CaO and SO₂/SO₃ under oxidizing conditions are discussed. The limestone and lime sulphation processes were carried out in a thermobalance under conditions relevant to atmospheric fluidized bed combustion. Sulphated samples, prepared in the form of cross-section particles, were examined in a scanning electron microscope by energy-dispersive X-ray and back-scattered electron imaging. Photomicrographs are presented. The reaction proceeded from the outer surface of the particles and along the pores. Surface textural changes during the reaction were considered. The layer of products was identified as controlling both the rate and extent of limestone/lime sulphation. In the products, two sulphur-bearing solids (CaSO₄ and CaS) were identified. The presence of CaS, which may cause difficulties in practice, is attributed to CaSO₃ disproportionation. This revised version was published online in August 2006 with corrections to the Cover Date.     

Hydrothermal synthesis and crystal structure of a layered vanadium oxide with an interlayer metal coordination complex: [Co(phen)3][V10O26]·H2O

A novel compound, [Co(phen)₃][V₁₀O₂₆]·H₂O, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Ccca with a=13.447(3), b=29.936(6), c=23.252(5) Å, V=9360(3) Å³, Z=8 and R=0.0285. Data were collected on a Rigaku R-AXIS RAPID IP diffractometer at 293 K in the range of 1.36<θ<24.99°. The structure of the compound consists of vanadium oxide layers, which are built up from the infinite VO₄ chains by corners and edges sharing. The [Co(phen)₃]²⁺ complexes occupy the interlayer space and contact each other via π−π stacking interactions of the phen groups to form infinite one-dimensional chains.     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

The initial oxidation of magnesium: an in situ study with XPS,HERDA and ellipsometry

The initial oxidation of magnesium at oxygen partial pressures between 1.3 × 10^?8 and 1.3 × 10^?5 Pa and at temperatures ranging from 273 to 550 K has been investigated in situ with X‐ray photoelectron spectroscopy (XPS), ellipsometry and high resolution elastic recoil detection analysis (HERDA). Quantitative analysis of the XPS spectra showed a clear oxygen deficiency with respect to MgO for the initial oxide. HERDA measurements confirmed this relatively low oxygen content in the thin oxide layers formed. Ellipsometry measurements showed that the electronic structure of the initially formed oxide differs significantly from that of bulk MgO. The band gap values at room temperature for the oxide layers investigated are clearly smaller than the value for bulk MgO. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of nature of support and impregnating agent on lipophilicity determination for nonionic surfactants by reversed-phase thin-layer chromatography

Summary The retention of 9 nonylphenyl ethylene oxide oligomers was determined in 15 reversed-phase chromatographic systems using silicone oils of various molecular mass as impregnating agents and silica, cellulose and alumina supports. The data were evaluated with principal component analysis carried out on the covariance and the correlation matrices. The R_M values did not follow the additivity rule and they did not change linearly with increasing length of the ethylene oxide chain. This is probably due to the folded state of the chain in the eluent. The molecular mass of the silicone oils had a negligible effect on the retention whereas the retention increased with increasing level of impregnation. The support considerably influenced the lipophilicity values of these nonionic surfactants and cellulose seemed to be the most appropriate support. Calculations proved that the application of a correlation matrix may cause data distortion; therefore, the use of a covariance matrix is strongly proposed.     

Concurrent adsorption and complex formation in reversed-phase liquid-liquid chromatography with tri-n-octylphosphine oxide

Summary Reversed-phase liquid-liquid chromatographic systems consisting of an aqueous mobile phase and an organic liquid stationary phase of the proton acceptor tri-n-octylphosphine oxide (TOPO) inn-decane, coated on LiChrosorb RP-8, have been studied. The solutes were hydrophilic aromatic carboxylic acids and phenol. The retention of the carboxylic acids shows a minimum at 10 mM of TOPO, whereas increasingly tailing peaks have been obtained with decreasing concentrations of TOPO. This behaviour is due to a concurrent complex formation by hydrogen bonding with TOPO in the liquid stationary phase and adsorption at the interface between the support and the liquid stationary phase. The adsorption of TOPO, ketones and aromatic acids from hexane on Li-Chrosorb RP-8 has been studied, and seems to be due to residual silanol groups. The adsorption isotherm of TOPO has been determined and can be described by a two-site Langmuir adsorption model. Non polar solutes are not adsorbed. The influence of TOPO on the retention and the peak symmetry of carboxylic acids in the liquid-liquid chromatographic system appears to be due to a competition between TOPO and the acids for the same adsorption sites. No competition was found for phenol.Presented at the 14th International Symposium on Chromatography London, September, 1982     

An in vitro Study on Transition from NO-Hemoglobin to Methemoglobin： Oxygen Effect

The nitrosyl-hemoglobin (HbNO) is the carrier of nitric oxide (NO) which is the important messenger molecule displaying multiple physiologic and pathophysiologic roles. However it is still not clear for the fate of HbNO molecules during the venous-arterial transit. In this letter, the HbNO transition in vitro was studied by using the electron paramagnetic resonance (EPR) spectra. It was found that HbNO molecules were stable when oxygen did not exist in the system but not stable in aerobic conditions. The absorption spectra further revealed that the methemoglobin (metHb) was the product of HbNO in aerobic environment, showing that the HbNO changed to metHb when there were enough oxygen molecules in the system.     

钙与 DBC-偶氮氯膦显色反应的研究及其在高纯氧化钇中钙的测定的应用

在PH8.5-9的液中,钙可与DBC-偶氮氯膦形成一种紫色的稳定配合物。该配合物在625nm处有最大吸收,表观摩尔吸光系数为2.6×10~4L.mol~(-1).cm~(-1),配合物组成为Ca:DBC-偶氮氯膦=1:1。在Zn-DTPA和乙二胺的存在下,较大量的Y~(3+)、Fe~(3+)及Cu~(2+)、Mo(Ⅵ)、Cr~(3+)等三十余种离子不干扰钙的测定。方法的选择性较好,利用本方法,并经简单萃取分离基体后,测定了高纯氧化钇和易切削钢中的微量钙,结果令人满意。标准加入试验回收率好。方法简便实用。