Boosting the Durability of Triboelectric Nanogenerators: A Critical Review and Prospect

Triboelectric nanogenerators (TENGs) have attracted great interests in the development of sustainable energies and intelligent society. However, a big challenge for TENGs in practical applications is the unavoidable external mechanical abrasion and/or contaminant adsorption on the triboelectric materials, which leads to the significant decrease of the durability of TENGs and is urgently needed to be addressed. There are already a series of interesting progresses on the topic of the TENGs’ durability. In this study, reviewing the durability of TENGs via both the advanced materials/structure designing and the novel surface/interface engineering is focused upon, which includes choosing basic TENG materials, improving composites performance, optimizing structures, and designing triboelectric surfaces and interfaces. To get a better understanding of the durability of TENGs in published studies, the quantifiable levels of service life are also summarized including operation cycles, time, friction coefficient, and wear loss of triboelectric materials, where the boosting mechanisms are also discussed and summarized. Finally, the challenges as well as key strategies toward high durable TENGs are presented.     

含氢储能的多源联合发电系统调度研究

风电和光伏发电具有间歇性和随机性,为了降低在多源联合发电系统中的弃风弃光率,采用含氢储能系统和火电机组配合来平滑风电和光电机组出力。文中以系统运行成本最小和弃电惩罚成本最小为目标,以系统功率平衡、火电机组出力和爬坡、热备用、风电和光电出力及储能系统储氢罐容量、电解槽和燃料电池功率等为约束条件构建了多源联合发电系统日前调度模型。通过YALMIP工具箱对模型进行编程,并调用CPLEX对编写的程序进行求解。对含有风电、光电、火电机组以及储能系统的多源联合发电系统进行算例分析,通过对比有无储能系统的弃风弃光量和系统总运行成本,证明了含氢储能系统可以有效降低系统的弃风弃光率,并提高系统的经济性。     

IGBT芯片静态输出曲线连续测量方法

绝缘栅双极型晶体管(IGBT)芯片的静态输出曲线是考核其能量损耗及指导多芯片并联设计的重要指标之一。现有测量IGBT静态输出曲线的方法多采用商用化的功率器件分析仪,然而商业化功率器件分析仪存在价格昂贵、夹具单一的问题。亟需开发一种简单、快速、有效的静态输出曲线测量方法。面向高压IGBT芯片,提出一种新的静态输出曲线连续测量方法及测试电路,有效减小了IGBT芯片的电导调制效应和温升效应对静态输出曲线的影响。通过实时测量动态过程中的电压及电流,可以快速得到IGBT芯片静态输出曲线。通过对比本文连续法与功率器件分析仪的测量结果,证明了所提方法的有效性。     

基于MATLAB的集成电路储能焊封装能量分布研究

气密性是集成电路封装中的一项重要技术指标,对于集成电路的可靠性使用具有重要作用。就气密性封装工艺中的储能焊封装技术进行了讨论,通过对储能焊设备放电过程进行分析及建模,得到了气密性焊接能量与各个工艺参数之间的关系,并利用MATLAB软件进行了模拟计算。结合具体实验,验证了理论建模及模拟的正确性,对于储能焊焊接的工艺参数设定及优化具有一定的指导意义。     

n型单晶硅片的电阻率和扩散方阻对IBC太阳电池电性能的影响

叉指背接触式(IBC)太阳电池因正面没有金属栅线遮挡,具有较高的短路电流,且组件外观更加美观。但由于IBC太阳电池正负电极在背面交叉式分布,在制备过程中需要采用光刻掩模技术进行隔离,难以实现大规模生产。采用Quokka软件仿真模拟了电阻率和扩散方阻对n型IBC太阳电池效率的影响,并对不同电阻率和扩散方阻的电池片进行了实验验证,从n型单晶硅片电阻率的选择和扩散工艺优化方面为IBC太阳电池的规模化生产提供了理论基础。实验结果表明,电阻率为3~5Ω·cm、扩散方阻为70Ω/时,小批量生产的IBC太阳电池平均光电转换效率可达23.73%,开路电压为693 mV,短路电流密度为42.44 mA/cm²,填充因子为80.69%。     

钇提高YT14硬质合金耐磨性的机制

研究了不同Ｙ添加量对ＹＴ１４硬质合金显微组织、结构和耐磨性的影响。结果表明，在ＹＴ１４硬质合金中添加微量Ｙ，可显著提高合金的耐磨性。Ｙ的主要作用是均匀细化碳化物相和Ｃｏ相；提高Ｃｏ粘结相中Ｗ、Ｔｉ元素的固溶量及αＣｏ相所占的体积分数，从而提高Ｃｏ粘结相的强韧性；Ｙ在合金中形成Ｙ２ＷＯ６，表明Ｙ还可还原和清除碳化钨表面氧化膜，增强Ｃｏ粘结相与硬质相之间的结合强度     

Amino acid overproduction by analog resistant mutants of the nitrogen fixing cyanobacteriumAnabaena sp 287

Two amino acid analog resistant mutants of the cyanobacteriumAnabaena sp 287 were isolated after MNNG mutagenesis.Anabaena ST 16, a mutant resistant to the alanine analog D-α-aminobutyric acid andAnabaena ST 25, another mutant resistant to the histidine analog l,2,4-triazole-3-alanine, released alanine and histidine, respectively, into the medium upon immobilization in alginic acid during diazotrophic growth in fluidized bed reactors. The rates of amino acid production by the mutants were 4.3 μmol mg chl^-1 h^-1 of D-alanine byAnabaena ST 16 and 16.6 μnol mg chl^-1 h^-1 of L-histidine byAnabaena ST 25. Nitrogen fixation by the mutants was not affected by the extracellular amino acid concentration. While the radioactive carbon flow was followed, the parent strain retained 93% of fixed¹⁴C and released only 7% into the medium. On the other hand,Anabaena ST 16 released 13% andAnabaena ST 25 released 29% into the medium. These mutants are beneficial in the production of radioactive amino acids using diazotrophic photobiotechnology.     

Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.     

Photoinduced graft polymerization of 2-methacryloyloxyethyl phosphorylcholine on polyethylene membrane surface for obtaining blood cell adhesion resistance

Phospholipid polymer, poly[2-methacryloyloxyethyl phosphorylcholine (MPC)], was grafted with polyethylene (PE) membrane using photoinduced polymerization technique to make the membrane resistant to cell adhesion. The water contact angle on the PE membrane grafted with poly(MPC) decreased with an increase in the photopolymerization time. This decrease corresponded to the increase in the amount of poly(MPC) grafted on the PE surface. The same graft polymerization procedure was applied using other hydrophilic monomers, such as acrylamide (AAm), N-vinylpyrrolidone (VPy) and methacryloyl poly(ethylene glycol) (MPEG). These monomers were also polymerized to form grafted chains on the PE membrane, and the grafting was confirmed with X-ray photoelectron spectroscopy. Analysis of amount and distribution of plasma proteins at the plasma-contacting surface of the original and the modified PE membranes were analyzed using immunogold assay. The grafting of poly(MPC) and poly(VPy) on PE membrane reduced the plasma protein adsorption significantly compared with that on the original PE membrane. However, the PE membranes grafted with poly(AAm) or poly(MPEG) did not show any effects on protein adsorption. Platelet adhesion on the original and modified PE membranes from platelet-rich plasma was also examined. A large number of platelets adhered and activated on the original PE membrane. Grafting with poly(AAm) did not suppress platelet adhesion, but grafting with poly(MPC) or poly(VPy) on the PE membrane was effective in preventing platelet adhesion. It is concluded that the introduction of the phosphorylcholine group on the surface could decrease the cell adhesion to substrate polymer.     

Novel method for bulk resistance evaluation in conductivity measurement for high-purity water

A major issue with the electrolytic conductivity measurement for pure water is the lack of standard or reference methods. A primary method traceable to SI and suitable for pure-water conductivity measurement was developed at the Physikalisch-Technische Bundesanstalt (PTB), Germany, as the base for the calibration method for the conductivity measuring devices at the low conductivity level. This paper provides a novel method to calculate the bulk resistance of pure water using impedance measured at a single frequency, which is one of the key procedures for the primary methods.