基于EWB的D/A数模转换器的仿真研究

阐述了D／A转换器的仿真原理，给出了T形电阻网络D／A转换器仿真模型的构造方法，并采用EWB进行了系统仿真，仿真结果表明该方法是合理、可行的。     

自适应比例因子模糊控制器在异步电动机调速系统中的应用

为了降低转子电阻变化对异步电动机矢量控制系统性能的影响，本文把自适应比例因子模糊控制器应用到了矢量控制系统中。介绍了自适应比例因子模糊控制方法的綦本原理，给出了使用自适应比例因子模糊控制器的异步电动机矢量控制系统的结构框图，对主模糊控制器和辅助模糊控制器进行了设计。仿真实验结果表明，采用这种控制方法的调速系统不仅具有优良的动态性能，而且对转子电阻变化具有很强的鲁棒性。     

Robust Output Tracking Control of an Uncertain Linear System via a Modified Optimal Linear-Quadratic Method

This study investigates the robust output tracking problem for a class of uncertain linear systems. The uncertainties are assumed to be time invariant and to satisfy the matching conditions. According to the selected nominal parameters, an optimal solution with a prescribed degree of stability is determined. Then, an auxiliary input via the use of an adapting factor, connected to the nominal optimal control, is introduced to guarantee the robustness and prescribed degree of stability for the output tracking control of the uncertain linear systems. This method is very simple and effective and can reject bounded uncertainties imposed on the states. A maglev vehicle model example is given to show its effectiveness.     

电子应用产品的防电击试验浅析

本文依据国家有关标准对电子应用产品的防电击试验进行了简介和分析，指出了试验中应注意的问题。     

电阻衰减匹配网络的设计计算法

声频系统,不管是播出系统还是节目制作系统,都是由为数不少的声频设备相互连接而成。设备之间的配置是否合理,直接影响节目制作的质量。由于现在我们使用的设备,规格繁多,性能各异,要把这些不同的输出阻抗和输入阻抗、相差甚远的输出电平和输入灵敏度合理地配接起来,既要使系统稳定可靠地输出,又要满足主要技术指标(频响、失真度和信噪比)的规定要求,级间的衰减、匹配是很重要的一环。     

MIM隧道结的电子输运特性和发光研究

论述作为一种新型发光器件的ＭＩＭ隧道结的发光机理，报告了该器件的发光现象和Ｉ－Ｖ特性曲线中负阻现象的实验观察。数据显示，结中表面等离极化激元（ＳＰＰ）与粗糙度的耦合是引起光发射的主要方面，ＳＰＰ对隧穿电子的阻塞作用导致了电子输运中的负阻现象。此外，还观察到了直接辐射的紫外峰。     

新器件条件下对行输出级电路计算公式的修正与补充(Ⅵ)

当彩色显示器使用初级线圈电感量L_P较小的新逆程变压器时,流过饱和导通行输出管的集电极电流I_(CP),不但包括偏转线圈L_Y中的正向锯齿波电流I_(YCP),还有不能忽略的FBT初级线圈中的正向锯齿电流I_(FCP),即CGA卡时峰值电流I_(CP)(6.1A)=I_(YCP)(3.9A)+I_(FCP)(2.2A)。因此有必要对行输出级电路的电流计算公式作相应的修正和补充。     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

I．O．T．旧梦成真

该文较详细地介绍了Ｉ．Ｏ．Ｔ管的发展历程，其特点及工作方式。     

硬盘驱动器巨磁电阻(GMR)磁头:从微米到纳米

近年来电脑硬盘存储密度的飞速增长(年增长100％)已超出摩尔定律的预言．这种惊人的高速增长中，最关键的因素是自旋阀纳米多层膜结构，即巨磁电阻(GMR)读传感器磁头的应用．事实上，巨磁电阻磁头读传感器(reader sensor)已经实现由微电子器件向纳米电子器件转化，并且形成大规模产业．这一过程包含了自旋电子学、材料科学、微电子工程学、化学、微机械力学和工程学等诸学科和相关微加工技术综合性挑战极限，进入纳米科技领域实质性进步．