Glyphosate Adsorption from Water Using Hierarchically Porous Metal–Organic Frameworks

The selective removal of one ligand in mixed-ligand MOFs upon thermolysis provides a powerful strategy to introduce additional mesopores without affecting the overall MOF structure. By varying the initial ligand ratio, MOFs of the MIL-125-Ti family with two distinct hierarchical pore architectures are synthesized, resembling either large cavities or branching fractures. The performance of the resulting hierarchically porous MOFs is evaluated toward the adsorptive removal of glyphosate (N-(phosphonomethyl)glycine) from water, and the adsorption kinetics and mechanism are examined. Due to their strong affinity for phosphoric groups, the numerous Ti–OH groups resulting from the selective ligand removal act as natural anchor points for effective glyphosate uptake. The relationships between contact duration, glyphosate concentration, and adsorbent dosage are investigated, and the impact of these parameters on the effectiveness of glyphosate removal from contaminated water samples is examined. The introduction of additional mesopores has increased the adsorption capacities by nearly 3 times with record values exceeding 440.9 mg g⁻¹, which ranks these MOFs among the best-reported adsorbents.     

Selenium Substitution in Bithiophene Imide Polymer Semiconductors Enables High-Performance n-Type Organic Thermoelectric

Designing n-type polymers with high electrical conductivity remains a major challenge for organic thermoelectrics (OTEs). Herein, by devising a novel selenophene-based electron-deficient building block, the pronounced advantages of selenium substitution in simultaneously enabling advanced n-type polymers is demonstrated with high mobility (≈2 orders of magnitude higher versus their sulfur-based analogues due to both intensified intra- and inter-chain interactions) and much improved n-doping efficiency (enabled by the largely lowered LUMO level with a ≈0.2 eV margin) of the resulting polymers. Via side chain optimization and donor engineering, the selenium-substituted polymer, f-BSeI2TEG-FT, achieves a highest conductivity of 103.5 S cm⁻¹ and power factor of 70.1 µW m⁻¹ K⁻², which are among the highest values reported in literature for n-type polymers, and f-BSeI2TEG-FT greatly outperformed the sulfur-based analogue polymer by 40% conductivity increase. These results demonstrate that selenium substitution is a very effective strategy for improving n-type performance and provide important structure-property correlations for developing high-performing n-type OTE materials.     

Tuning the Intermolecular Electrostatic Interaction toward High-Efficiency and Low-Cost Organic Solar Cells

Organic solar cells (OSCs) have achieved much progress with rapidly increasing power conversion efficiencies (PCEs). It should be noted that the top-performance OSCs are generally consisted of active materials with complex chemical structures, resulting in high costs. Here, combining the material design and morphology control, high-efficiency OSCs are fabricated by a low-cost donor: acceptor blend. A completely non-fused electron acceptor named Tz is designed and synthesized via introducing thiazole units on both sides of a bithiophene core, which shows an outstanding PCE of 13.3% with a typical polythiophene donor. More importantly, optimization guidelines are presented to get excellent morphology for low-cost donor:acceptor systems. Three polythiophenes are selected, poly(3-hexylthiophene) and its two derivatives with electron-withdrawing substitutions (PDCBT and PDCBT-2F), as donors to fabricate the cell devices. The computational and experimental data reveal that decreasing the electrostatic interaction between polythiophene and Tz is the key to getting a suppressed miscibility and thus a high phase purity. This study provides insight into the molecular design and donor:acceptor matching requirements for high-efficiency and low-cost OSCs.     

Imaging Solvent-Triggered Gaseous Iodine Uptake on Single Covalent Organic Frameworks

Covalent organic frameworks (COFs) are promising solid absorbents for the treatment of gaseous iodine. However, extensive efforts are still focused on empirical optimizations of specific binding sites and pore structures in COFs, and the chemical control of gaseous iodine uptake on COFs remains challenging. In this study, the chemically triggered sorption properties of COF-300 for I₂ vapors at the single-particle level with the dark-field microscope (DFM) are explored. The present operando single-particle DFM imaging method enables the direct visualization of an adsorption activity transformation from inactive COF-300 to active solvated COF-300 toward gaseous I₂ vapors. Exploiting the useful reaction information from time-lapsed DFM images, the tunable adsorption performance of solvated COF-300 is quantitatively compared by various solvents. The results illustrate that the isopropanol (IPA)-solvated COF-300 achieves the optimum adsorption capacity for I₂ among the absorbents. The reaction mechanism is elucidated to be the channel size enlargement and modification of internal surface chemistry in the IPA-solvated COF-300, producing a stable I₂/IPA-solvated COF-300 complex after the sorption reaction. The present chemical control of the sorption behavior of COF-300 revealed by DFM opens up a new fundamental paradigm for rationally developing high-performance COF-based absorbents for removing I₂ vapors.     

Hydrated Bi-Ti-Bimetal Ethylene Glycol: A New High-Capacity and Stable Anode Material for Potassium-Ion Batteries

Potassium-ion batteries have emerged not only as low-cost alternatives to lithium-ion batteries, but also as high-voltage energy storage systems. However, their development is still encumbered by the scarcity of high-performance electrode materials that can endure successive potassium-ion uptake. Herein, a hydrated Bi-Ti bimetallic ethylene glycol (H-Bi-Ti-EG) compound is reported as a new high-capacity and stable anode material for potassium storage. H-Bi-Ti-EG possesses a long-range disordered layered framework, which helps to facilitate electrolyte ingress into the entire Bi nanoparticles. A suite of spectroscopic analyses reveals the in situ formation Bi nanoparticles within the organic polymer matrix, which can alleviate stresses caused by the huge volume expansion/contraction during deep cycles, thereby maintaining the superior structural integrity of H-Bi-Ti-EG organic anode. As expected, H-Bi-Ti-EG anode exhibits a high capacity and superior long-term cycling stability. Importantly for potassium storage, it can be cycled at current densities of 0.1, 0.5, 1, and 2 Ag⁻¹ for 800, 700, 1000, and even 6000 cycles, retaining charging capacities of 361, 206, 185, and 85.8 mAh g⁻¹, respectively. The scalable synthetic method along with the outstanding electrochemical performance of hydrated Bi-Ti-EG, which is superior to other reported Bi-based anode materials, places it as a promising anode material for high-performance potassium storage.     

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High-Efficiency and Stable Perovskite Solar Cells

Despite the rapid developments are achieved for perovskite solar cells (PSCs), the existence of various defects in the devices still limits the further enhancement of the power conversion efficiency (PCE) and the long-term stability of devices. Herein, the efficient organic potassium salt (OPS) of para-halogenated phenyl trifluoroborates is presented as the precursor additives to improve the performance of PSCs. Studies have shown that the 4-chlorophenyltrifluoroborate potassium salt (4-ClPTFBK) exhibits the most effective interaction with the perovskite lattice. Strong coordination between  BF₃⁻/halogen in anion and uncoordinated Pb²⁺/halide vacancies, along with the hydrogen bond between F in  BF₃⁻ and H in FA⁺ are observed. Thus, due to the synergistic contribution of the potassium and anionic groups, the high-quality perovskite film with large grain size and low defect density is achieved. As a result, the optimal devices show an enhanced efficiency of 24.50%, much higher than that of the control device (22.63%). Furthermore, the unencapsulated devices present remarkable thermal and long-term stability, maintaining 86% of the initial PCE after thermal test at 80 °C for 1000 h and 95% after storage in the air for 2460 h.     

An Efficient One-Arrow-Two-Hawks Strategy Achieves High Efficiency and Stable Batch Variance for Benzodifuran-based Polymer Solar Cells

With the development of organic solar cells (OSCs), the high-performance and stable batch variance are becoming a new challenge for designing polymer donors. To obtain high photovoltaic performance, adopting polymers with high molecular weight as donors is an ordinary strategy. However, the high molecular weight need to subtly control the reaction time and state, inevitably caused batch-to-batch variations. Herein, a strategy of steric effect is applied to benzodifuran (BDF)-based polymer by introducing different positions of Cl atom, producing two polymers PBDFCl-1 and PBDFCl-2. The more twisted side chains conformation not only achieve the control of moderate molecular weight for PBDFCl-2, but also easily form molecular stacking through adopting BDF unit and maintain sufficient polymeric crystallinity. Due to the optimized stacking mode and good blend miscibility, PBDFCl-2-based device exhibitsa more elegant power conversion efficiency (PCE) of 17.00% compared to PBDFCl-1-based device. This is the highest efficiency record for BDF-based binary OSCs. Meanwhile, the PCE device variation of the different molecular weights for PBDFCl-2 is little, indicating the reduction of the batch variation. Therefore, smartly using steric effect of Cl atom in strong crystalline BDF unit can form efficient molecular stacking regulations and realize the coordination of high-performance and stable batch variance.     

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin-film semiconductors has triggered interest in their use for direct solar-driven water splitting to produce hydrogen. However, application of these low-cost, electronic-structure-tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic-catalyst-electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n⁺silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high-temperature annealing of the catalyst/TiO₂-protected-n⁺silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA_1-xCs_x)PbI₃ system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro-OMeTAD-hole-transport-layer (HTL)-based HOIP/n⁺Si solar cell, and a high photocurrent density of −15.9 mA cm⁻² (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n⁺Si/Pt photocathode in 1 m NaOH under simulated 1-sun illumination. While this thin-film design creates stable interfaces, the intrinsic photo- and electro-degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.     

Bifunctional Edge-Rich Nitrogen Doped Porous Carbon for Activating Oxygen and Sulfur

Oxygen reduction reaction (ORR) and sulfur reduction reaction (SRR) play key roles in advanced batteries. However, they both suffer from sluggish reaction kinetics. Here, an interesting nitrogen doped porous carbon material that can simultaneously activate oxygen and sulfur is reported. The carbon precursor is a nitrogen containing covalent organic framework (COF), constituting periodically stacked 2D sheets. The COF structure is well preserved upon pyrolysis, resulting in the formation of edge-rich porous carbon with structure resembling stacked holey graphene. The nitrogen containing groups in the COF are decomposed into graphitic and pyridinic nitrogen during pyrolysis. These edge sites and uniform nitrogen doping endow the carbon product with high intrinsic catalytic activities toward ORR and SRR. The COF derived carbon delivers outstanding performances when assembling as cathodes in the Li-S and Li-O₂ batteries. Simultaneous activation of oxygen and sulfur also enables a new battery chemistry. A proof-of-concept Li-S/O₂ hybrid battery is assembled, delivering a large specific capacity of 2,013 mAh g⁻¹. This study may inspire novel battery designs based on oxygen and sulfur chemistry.