Theory of a novel voltage-sustaining layer for power devices

The theory of a novel voltage-sustaining layer for power devices, called a Composite Buffer layer (CB-layer for short) is proposed. The CB-layer can be implemented in several ways, one particular implementation is used here, which consists of alternating n- and p-type regions, that are parallel to the direction of the applied electric field. In the off-state, the fields induced by the depletion charges of both region types compensate each other to allowing the doping in both n-regions and p-regions to be very high without causing a reduction of the breakdown voltage. In the onstate the heavy doping ensures the voltage drop is very low and that the saturation current density high. A simple relationship between the specific on-resistance and R_on and the sustaining voltage V_B can be shown to be R_on=2.53 × 10⁻⁷bV_B^1.23 ωcm², where the breadth b (in μm) of each region is much smaller than the thickness W. The design method of the CB-layer is discussed in some detail. The simulation results are shown to be in perfect agreement with the theory. The structure has application to a wide variety of different power devices. An RMOST structure has been used to demonstrate the benefits of the technique in the paper, for which excellent performance is demonstrated.     

Methacrylate monolithic stationary phases for gradient elution separations in microfluidic devices

Methacrylate monolithic stationary phases were produced in fused-silica chips by UV initiation. Poly(butyl methacrylate-co-ethylene dimethacrylate) (BMA) and poly(lauryl methacrylate-co-ethylene dimethacrylate) (LMA) monoliths containing 30, 35 and 40% monomers were evaluated for the separation of peptides under gradient conditions. The peak capacity was used as an objective tool for the evaluation of the separation performance. LMA monoliths of the highest density gave the highest peak capacities (≈40) in gradients of 15 min and all LMA monoliths gave higher peak capacities than the BMA monoliths with the same percentage of monomers. Increasing the gradient duration to 30 min did not increase the peak capacity significantly. However, running fast (5 min) gradients provides moderate peak capacities (≈20) in a short time. Due to the system dead volume of 1 μL and the low bed volume of the chip, early eluting peptides migrated over a significant part of the column during the dwell time under isocratic conditions. It was shown that this could explain an increased band broadening on the monolithic stationary phase materials used. The effect is stronger with BMA monoliths, which partly explains the inferior performance of this material with respect to peak capacity. The configuration of the connections on the chip appeared to be critical when fast analyses were performed at pressures above 20 bar.     

On the optically transparent WDM ATM multicast (3M) switches

We describe an architecture design and implementation of the optically transparent wavelength-division-multiplexed (WDM) asynchronous-transfer-mode (ATM) multicast (3M) switch for all optical high-speed networks. By using the WDM techniques, the wire complexity in both the switch fabric and the concentrator can be reduced from O(N²) to O(N). By using integrated photonic devices and highly parallel processing and pipeline control electronic circuits the switch is handling signals at the cell level (53 bytes) instead of at the bit level and can achieve very high speed and high throughput operation. Several key components, including a cell synchronizer, a photonic VCI over-writting unit, a wavelength converter, an optical concentrator, and a WDM memory, have also been proposed to realize this 3M switch. All of the photonic devices are highly integratable and are very suitable for building future large-scale, low-cost photonic ATM switches. A combination of both the ATM and WDM techniques will provide an ultimate version for optical networking with almost unlimited capacity.     

Molecular reactors and machines: applications, potential, and limitations

Molecular reactors are miniature vessels for the assembly of reactants at the molecular level, in order to change the nature of chemical transformations. It seems probable that those that will find most immediate applications are those that change product ratios or give products which would not readily form in the absence of the reactors, and thereby afford easy access to materials that are otherwise difficult to obtain. Molecular machines consist of interrelated parts with separate functions and perform some kind of work, at the molecular level. Practical examples are likely to be relatively uncomplicated and not based on individual functions of single-molecule devices. Instead they will probably rely on extensive redundancy of the molecular components and their interactions and reactions, as well as of the machines themselves.     

A simple encapsulation method for organic optoelectronic devices

The performances of organic optoelectronic devices, such as organic light emitting diodes and polymer solar cells,have rapidly improved in the past decade. The stability of an organic optoelectronic device has become a key problem for further development. In this paper, we report one simple encapsulation method for organic optoelectronic devices with a parafilm, based on ternary polymer solar cells(PSCs). The power conversion efficiencies(PCE) of PSCs with and without encapsulation decrease from 2.93% to 2.17% and from 2.87% to 1.16% after 168-hours of degradation under an ambient environment, respectively. The stability of PSCs could be enhanced by encapsulation with a parafilm. The encapsulation method is a competitive choice for organic optoelectronic devices, owing to its low cost and compatibility with flexible devices.     

A detector telescope with charge coupled devices for particle dosimetry in space

A telescopic device with charge coupled devices (CCDs) for particle dosimetry in space has been developed. Data on ionization events of energetic particles passing the CCDs are processed in an image analyzing system of a PC. As ‘Charged Particle Telescope’ (CHAPAT), the equipment was flown on the russian space station MIR during the EUROMIR mission in 1995. The response of the CCDs to various charged particles and methods for the discrimination of heavy particles in CCDs are discussed. First results of a correlation of temporal particles fluxes to the actual orbital parameters of MIR clearly identify passages through the South Atlantic Anomaly (SAA).     

Electrically induced flows in the vicinity of a dielectric stripe on a conducting plane

We report a theoretical and experimental study of the hydrodynamic flow induced by an a.c. electric field in the vicinity of a dielectric stripe deposited on a conducting plate. In the theoretical part, we model the stripe as a small change of the surface capacitance of the plate, and a perturbative approach is used to perform the calculations. This approach predicts an outwards rectified electro-osmotic slip along the surface that generates two steady counter-rotating rolls, the size of which decreases with the frequency. In the experimental section, we use tracers to determine the structure of the flow and investigate its dependence on the frequency and the amplitude of the applied voltage. The structure and amplitude of the observed flow compares satisfactorily with the theoretical analysis. This could guide the design of surface-controlled flows and help to understand the collective behavior of colloids near electrodes. Received 20 June 2002 RID="a" ID="a"e-mail: nadal@crpp.u-bordeaux.fr     

有机偏振发光材料及其成膜技术研究进展

本文对近年来有机偏振发光及其发光材料和成膜技术的发展进行了综述。重点从材料化学结构与偏振发光的关系出发,系统地讨论了几类发光材料的性质、定向排列成膜的方法及其有机偏振发光器件的制作和应用。     

Controllable Intramolecular Motions That Generate Fluorescent Signals for a Metal Scorpionate Complex

Simply by changing the pH value, the side chain of complex 1 can be reversibly moved between two positions. Coordination to the metal center through the nitrogen atom of the side chain at moderate pH values is accompanied by a decrease in fluorescence intensity (from I_F=100% to I_F=60%). A further decrease is observed upon deprotonation of the bound water molecule at higher pH (I_F≤2%). Therefore, 1 can be seen as a molecular three-position switch.