ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

Infrared dichroism measurements on the alkyl chain packing of an ionic detergent intercalated between silicate layers

 Microcrystals of the metal silicate hydrate ilerite orient macroscopically on the surface of a ATR-crystals and thus, are accessible for infrared linear dichroism measurements. We present first results which indicate that the alkyl chain packing and the orientation of the polar group of dodecyltrimethylammoniumbromide (DTAB) intercalated between silicate layers can be determined in terms of infrared order parameters. The properties of DTAB can be modulated by the relative humidity of the surrounding atmosphere and by temperature. Upon heating DTAB undergoes a phase transition from a paraffin-like solid to a fluid phase. The former is characterized by the orthorhombic perpendicular packing of the frozen alkyl chains with tilted long axes. The interactions between the ionic groups of the surfactant and that of the host matrix stabilize the lamellar arrangement of DTAB in the crystalline and in the fluid phases. Received: 14 January 1998 Accepted: 27 July 1998     

聚偏氟乙烯取向薄膜的结晶形态

本文用小角激光散射法研究了聚偏氟乙烯薄膜在拉伸取向过程中晶体形态及结构的变化。拉伸使球晶形变为椭球,同时伴随着局部熔融与重结晶过程,散射图案由原来的四叶瓣发展为八叶瓣。红外测量及X-射线衍射分析表明,拉伸引起分子链构象改变,使晶型发生了转变。     

Adsorption of polyamides and polyamide–silane mixtures at glass surfaces

The individual and combined adsorption behavior of polyamides and two different silanes to multicomponent glass surfaces was probed with a combination of x‐ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and static contact angle measurements. Samples were analyzed with and without solvent rinsing to separate the weakly bound (physisorbed) and more strongly bound (chemisorbed) species. High‐resolution XPS on N 1s revealed that the polyamides adsorb to the glass surfaces via protonated amine species at the acidic (OH) sites on the glass surface. Angle‐resolved XPS confirmed this by showing that the alkyl portion of the polymer is oriented away from the glass interface. In competitive coadsorption studies it was found that amino‐terminated silanes preferentially adsorb to the glass surface, relegating the polyamide to a physisorbed outer layer. When mercaptoterminated silanes were competitively coadsorbed the polyamide was preferentially adsorbed even when present at a concentration twenty times less than that of the silane. Altogether, this work reveals the strong interaction between surface silanols and amino‐functionalized organics. Copyright © 2003 John Wiley & Sons, Ltd.     

Highly tilted antiferroelectric (R) enantiomers useful for the formulation of eutectic mixtures

ABSTRACT

Novel chiral three-ring (R) enantiomers were synthesised using optically active (R)-(?)-2-octanol. Properties, such as the sequence of phases, the transition temperatures and enthalpies, were tested by a polarising optical microscope and differential scanning calorimeter. An antiferroelectric smectic phase (SmC_A*) with a direct transition from the antiferroelectric to the isotropic phase (SmC_A*-Iso) was observed for three esters with an achiral C₃F₇CH₂O(CH₂)₃O– terminal chain. Bi- and multicomponent mixtures with a broad temperature range of the antiferroelectric phase and good electro-optical properties were formulated. Helical pitch of pure esters and mixtures was measured by spectrophotometry method.     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

Controlling electron delocalisation in constrained N,N′-dimethyl-4,4′-bipyridinium dications

The synthesis is described of two N,N′-dimethyl-4,4′-bipyridinium salts for which the two pyridinium rings are connected via varying length alkoxy chains attached at the 3,3′-locations.     

含氮给体结构对丙烯腈电荷转移光聚合的影响

<正> 对于正性烯类单体,主要是乙烯基咔唑的电荷转移聚合,诚田已作过详细综述。负性烯类单体的电荷转移聚合主要研究的单体是丙烯腈(AN)及甲基丙烯酸甲酯(MMA)。Barton等研究了芳烃为引发剂的MMA光聚合。我们研究了芳胺为引发剂的光聚合。 芳胺,尤其是芳叔胺,是较强的电子给体,与负性单体在光照下经激基复合物而引发聚合,我们的实验表明,吡啶及其同系物(喹啉与吖啶)并不象吡咯及其同系物(吲哚与咔唑)那样有效地引发AN等负性单体的光聚合(见表1)。从图1所示的结构看,它们有     

铝交联皂石的合成和表征及催化性能

用XRD、化学分析、IR、MASNMR、TPD等手段表征了合成皂石及其铝交联物的结构。结果表明:皂石的交联密度与四面体层电荷和交联条件(Al/土比)有关。在乙醇氨化反应中,交联皂石显示了较好的催化活性和选择性。皂石的交联密度与液相产物分布的关系表明层柱材料对此反应具有择形催化作用。醇氨化反应可能是在吸附态NH_3和气相醇分子间进行的。     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]