Solubility parameter determination of cationic surfactants by inverse GC

Summary The solubility parameters of cationic surfactants were obtained using the inverse gas chromatographic technique. The surfactants didodecyl dimethyl ammonium bromide, dioctadecyl dimethyl ammonium bromide and dodecyl pyridinium chloride were used as stationary phase and retention data of different probe solutes were measured at different temperatures. The results were analysed by the combination of Flory-Huggins and Hildebrand theories, and the solubility parameters of the surfactants were obtained in a range of temperatures between 80–120°C.     

用迈克耳逊干涉仪测量气体折射率的误差的研究

研究在用迈克尔逊干涉仪测量气体折射率时存在的系统和方法误差，提出了误差修正方法。     

燃煤烟气中As、Se、Pb的形态分布及S、Cl元素对其形态分布的影响

基于化学热力学平衡分析方法，计算分析了燃煤烟气中重金属As、Se、Pb的形态分布规律，研究了S、Cl等元素对As、Se、Pb的形态分布规律的影响。结果表明，氧化性气氛下，As以As₂O₅、As₄O₆、AsO等氧化物的形式存在；Se主要以SeO₂形式存在；Pb在1000 K以下主要是固态PbSO₄，1200 K以上为气态PbO。还原性气氛下，As在较低温度时为固态As₂S₂，900-1400 K以As₂、AsS、AsN气体共存，2000 K以上全部转化为气态AsO。Se在1100 K以下主要以气态H₂Se存在，1100 K开始生成SeS和Se₂气体，1800 K时主要是气态Se和少量气态SeO；Pb在中低温时主要是PbS，1800 K以上气态Pb为主要存在形态。S在还原性气氛下增大了AsS（g）、PbS（g）、SeS（g）的比例，氧化性气氛下对As、Se、Pb形态分布基本无影响；Cl无论在氧化还是还原气氛下对As、Se影响均较小，但对Pb的形态分布影响较大。     

遥感器CCD驱动器热设计及其在摄像过程中的温度变化

CCD驱动器是航天成像遥感器摄像过程中的主要热源之一。防止CCD驱动器过热是保证其正常工作的重要方面。介绍了遥感器的工作模式和对CCD驱动器采取的热控制措施。通过热平衡试验,利用回归的方法,对CCD驱动器在摄像过程中的温度变化规律进行了分析,同时对热控制效果进行了评估。CCD驱动器工作时升温速率在0.85℃/min左右,整个摄像过程中最高温度约为26℃,所实施的热控制措施效果理想。     

Submicrometric Displacement and Vibration Measurement Using Optical Feedback in a Fiber Laser

A very simple and efficient technique for the remote sensing of a noncooperative target is presented. This technique is based on the frequency-shifted reinjection of light in a class B laser. Ytterbium- and erbium-doped fiber lasers have both been used to measure displacements with a submicrometric resolution and the vibration power spectrum of an object.     

蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

Analytical study of a flattened Gaussian beam through multi-apertured optical imaging systems of B = 0

By using the methods of the matrix decomposition and expansion of the hard-edged aperture function into a finite sum of complex Gaussian functions, the recurrence propagation expressions for a flattened Gaussian beam (FGB) through multi-apertured optical imaging systems of B = 0 are derived and illustrated with numerical examples. Comparisons with the straightforward numerical integration of the Collins formula and with the previous work are made. It is shown that the main advantages of our methods and results are the more accuracy and great reduction of computer time.     

Tunable narrow-band infrared emitters from hexagonal lattices

In this work, we present both the theoretical basis as well as supporting experimental measurements for development of a novel mid-infrared thermally stimulated narrow band emitter with a spectral bandwidth of less than 10%. To achieve this, we utilize a metallized-surface 2D photonic crystal of air voids in a silicon background with hexagonal structure symmetry. Our results are based on the generation of discrete surface plasmon (SP) modes in the thin metallized layer residing on the top surface. This yields a series of adequately spaced discrete peaks in the reflection spectrum, dominated by a single sharp feature corresponding to the lowest plasmon order, in an otherwise uniform highly reflective spectrum (>90%) over most of the IR spectrum. This, in turn, gives rise to a sharp absorption feature with a correspondingly narrow thermal emission peak in the emission spectrum. Transfer matrix calculations simulate well both the position and strengths of the absorption peaks. By altering the period of the surface photonic lattice, the SP peak and emissive band can be tuned to the desired wavelength. These devices promise a new class of tunable infrared emitters with high power in a narrow spectral bandwidth. Such narrow band sources are critical to achieving high efficiency gas sensors.     

Analysis of Two-Dimensional Optical Fields Using an Additional Shift

A solution to the phase problem in optics is considered within the context of registration and analysis of two-dimensional stationary optical fields transformed by the object under study or fields forming an image. To obtain information on amplitude and phase distributions of the light field analyzed, a method of registration of two intensity distributions is used. The first distribution corresponds directly to the amplitude distribution. The other is formed for the sum of the initial field and the field shifted along a certain direction. The intensity distributions obtained allow one to calculate the two-dimensional structure of the field under study. It is noteworthy that the method requires no iteration procedures in solving the problem. This leads to speeding up of the processing and analysis of the information. Two variants of optical schemes for the analysis of light fields are considered. The first one corresponds to registration of the image of the analyzed plane and the second to registration of the spectrum of the spatial frequencies.