Simultaneous determination of cobalt,copper, iron and vanadium in crude petroleum oils by HPLC

Summary A method has been developed for the simultaneous formation and solvent extraction of cobalt (II), copper (II), iron (II) and vanadium (IV) complexes of bis (acetylpivalylmethane)ethylenediamine (H₂APM₂en) in methyl isobutyl ketone. The complexes are eluted from a reversed phase HPLC column with a mixture of methanol:water:acetonitrile and detection was at 260 nm. The method has been applied to the simultaneous determination of cobalt, copper, iron and vanadium in crude petroleum oils at the ng level.     

东太平洋深海锰结核的化学元素研究

用ICP-AES法测定了东太平洋深海锰结核样品中二十多种主，次及微量元素，结果表明，表面瘤状和表面光滑两种类型锰结核的化学元素含量有较明显的区别，如表面光滑的锰结核TiO2含较高，而表面瘤状的锰结核Mn/Fe之值较高等。     

SPORES AND POLLEN IN CRUDE OILS AND PETROLEUM SOURCE OF TARIM BASIN

One hundred and forty-seven species of spores and pollen referred to 77 genera found in the crudeoil samples taken from four petroliferous provinces of the Tarim Basin of Xinjiang Provincehave been studied in this paper. By means of these spore and pollen fossils, the geological ages anddistribution of the petroleum source rocks of the basin are judged. Also, the principles and methodsto judge the petroleum source of a petroleum province by spore/pollen and other microfossils in crudeoils are explained.     

双烯合成反应与气相色谱法联合测定油品中共轭二烯烃含量的研究 Ⅱ.短毛细管柱气相色谱法

在填充柱气相色谱法的基础上，使用１２ｍ×０．２２ｍｍｉ．ｄ．的ＳＥ－３０短毛细管柱（ＷＣＯＴ），分析了乙烯生产副产物——未加氢裂解汽油（５５℃～２２０℃馏分）中共轭二烯烃的含量，分析一次需２２ｍｉｎ，内标物正十六烷得到了很好的分离。     

石油焦与煤混合燃料热重分析研究

石油焦与煤混合燃烧是高效处理石油焦的有效方法，作者对选用的石油焦和煤不同配比的混合燃料进行了热重分析研究。使用常压高温热天平研究、分析了各配比混合燃料的热解特性和燃烧特性。并根据化学动力学方法计算了各过程的化学动力学参数，即活化能E和频率因子A0。结果表明，各混合燃料热解起始温度大致相同，随煤焦比减小，挥发分析出速率变缓，最大释放速度所对应的温度升高，最终失重率减小，挥发分释放特性指数减小；随煤焦比增大，混合燃料着火温度和燃尽温度逐渐降低，最大燃烧速率所对应的温度降低，燃烧特性指数增大；随煤焦比减小，活化能和频率因子增大。     

3-(4-Hydroxymethylphenylsulfanyl)propanoic acid (HMPPA) as a new safety catch linker in solid phase peptide synthesis

A new safety catch linker, 3-(4-hydroxymethylphenylsulfanyl)propanoic acid (HMPPA), is described for use in solid phase peptide synthesis. The linker is readily synthesized from commercially available chemicals in a more cost efficient way compared to similar reported linkers. The HMPPA linker is easily attached to an amino derivatized solid support followed by on-resin oxidation of the thioether to sulfoxide, thereby making the linker very stable towards strong acid treatment. Final resin cleavage is performed by reductive acidolysis.     

A comparative study of solvent extraction of total petroleum hydrocarbons in soil

Three non-specific methods for the extraction of total petroleum hydrocarbons (TPH) from soil into organic solvent were compared. The techniques used for sample preparation were Soxhlet extraction, closed-vessel microwave-assisted extraction, and CEN shake extraction. The total concentrations of extracted compounds in the boiling point range of C10–C40 were determined by gas chromatography with flame ionization detection. The best recovery (99%) and repeatability (±3%) from standard oil mixtures were obtained with microwave-assisted extraction. However, the different extraction methods exhibited different behaviour when spiked soil samples were extracted. The best repeatability was obtained with CEN shake extraction (±6%) but the repeatability values for Soxhlet and microwave-assisted methods were quite high (>20%). However, the larger uncertainties of the latter extraction methods does not necessarily limit the applicability of these methods to the determination of petroleum hydrocarbons in soil, as in the assessment of soil contamination the expanded uncertainty of the result is usually not limited by analytical uncertainty, but rather by the uncertainty of the primary sampling stage. However, distinctive variation found in the chromatographic profiles illustrates that discretion should be obeyed when chromatograms obtained after application of different extraction methods on petroleum contaminated samples are to be used in the fingerprinting or age dating studies. Otherwise, misleading conclusions concerning the age of spillage could be drawn.     

Intracellular fate of hydrocarbons

In previous work, purification procedures and zymogram analysis conducted with supernatants of crude extracts from aerobic mycelium of the YR-1 strain of Mucor circinelloides isolated from petroleum-contaminated soils indicated the existence of only one soluble alcohol oxidase (sAO) activity. In the present work enzymatic activity of alcohol oxidase (AO) was also detected in the mixed membrane fraction (MMF) of a high-speed centrifugation procedure after drastic ballistic cellular homogenization to break the mycelium from strain YR-1. When mycelial cells were gently broken by freezing the mycelium with liquid nitrogen, smashing in a mortar, and submitting the samples to an isopycnic sucrose gradients (10–60% sucrose), AO activity was detected in particular and discrete fractions of the gradient, showing specific density values quite different from the density of peroxisomes. The results suggest that there could be a different intracellular pattern of distribution of the microsomal fraction in aerobically grown mycelium depending on the carbon source used in the culture media, including alcohols and hydrocarbons, but not in glucose. In working with particulate fractions, we found two AO activities: a new membrane alcohol oxidase (mAO) activity and the sAO. Both activities appear to be located in the inner of the cells in specific compartments different from the peroxisomes, so mAO could be in the membrane of these compartments and sAO in the lumen of the vesicles. We also assayed other enzymatic activities involved in hydrocarbon biodegradation to establish its intracellular location and other enzymatic activities such as peroxidase to use them as intracellular markers of different organelles. In the case of monooxygenase, the first enzymatic step in the hydrocarbon biodegradation pathway, its location was in the same fractions where AOs were located, suggesting the existance of a specific organelle that contains the enzymatic activities involved in hydrocarbon biodegradation.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.