Formation and tribological properties of two‐component ultrathin ionic liquid films on Si

Several single‐component and two‐component imidazolium ionic liquids (ILs) ultrathin films were formed on Si substrates by a dip‐coating and heat treatment process. The formation and surface properties of the films were analyzed by means of ellipsometric thickness measurement, X‐ray photoelectron spectra and atomic force microscope. The adhesive and nanotribological behaviors of the films were evaluated by a homemade colloidal probe. A ball‐on‐plate tribometer was used to test the microtribological performances of these films. As a result, the two‐component ILs ultrathin film containing 80% solid‐like ILs phase shows more homogenous surface morphologies and optimal micro/nano‐tribological properties as compared to single‐component ILs films, which is ascribed to a synergic effect between the steady solid‐like ILs phase as the backbone and the proper amount of flowable liquid‐like ILs phase. By studying the influence of various solid/liquid ILs ratios on tribological properties of the two‐component ILs films, we might find the way to design ILs films with excellent comprehensive tribological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

Microfluidic Spinning of Cell‐Responsive Grooved Microfibers

Engineering living tissues that simulate their natural counterparts is a dynamic area of research. Among the various models of biological tissues being developed, fiber‐shaped cellular architectures, which can be used as artificial blood vessels or muscle fibers, have drawn particular attention. However, the fabrication of continuous microfiber substrates for culturing cells is still limited to a restricted number of polymers (e.g., alginate) having easy processability but poor cell–material interaction properties. Moreover, the typical smooth surface of a synthetic fiber does not replicate the micro‐ and nanofeatures observed in vivo, which guide and regulate cell behavior. In this study, a method to fabricate photocrosslinkable cell‐responsive methacrylamide‐modified gelatin (GelMA) fibers with exquisite microstructured surfaces by using a microfluidic device is developed. These hydrogel fibers with microgrooved surfaces efficiently promote cell encapsulation and adhesion. GelMA fibers significantly promote the viability of cells encapsulated in/or grown on the fibers compared with similar grooved alginate fibers used as controls. Importantly, the grooves engraved on the GelMA fibers induce cell alignment. Furthermore, the GelMA fibers exhibit excellent processability and could be wound into various shapes. These microstructured GelMA fibers have great potential as templates for the creation of fiber‐shaped tissues or tissue microstructures.     

Patterning Surfaces for Controlled Platelet Adhesion and Detection of Dysfunctional Platelets

Platelets play a fundamental role in thrombus formation and in the pathogenesis of arterial thrombosis. Patterning surfaces for controlled platelet adhesion paves the way for adhesion and activation mechanisms in platelets and detection of platelet functional defects. Here, a new and simple method based on controlled polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) on the surface of styrene‐block‐(ethylene‐co‐butylene)‐block‐styrene (SEBS) is shown. The competition between polymerization and degradation enables platelet adhesion on SEBS to be switched on and off. The adhesive sites of the platelets can be down to single cell level, and the dysfunctional platelets can be quantitatively detected.

     

Arraying Cell Cultures Using PEG‐DMA Micromolding in Standard Culture Dishes

A robust and effortless procedure is presented, which allows for the microstructuring of standard cell culture dishes. Cell adhesion and proliferation are controlled by three‐dimensional poly(ethylene glycol)‐dimethacrylate (PEG‐DMA) microstructures. The spacing between microwells can be extended to millimeter size in order to enable the combination with robotic workstations. Cell arrays of microcolonies can be studied under boundary‐free growth conditions by lift‐off of the PEG‐DMA layer in which the growth rate is accessible via the evolution of patch areas. Alternatively, PEG‐DMA stencils can be used as templates for plasma‐induced patterning.

     

Preparation of Gradient Surfaces by Using a Simple Chemical Reaction and Investigation of Cell Adhesion on a Two‐Component Gradient

This article describes a simple method for the generation of multicomponent gradient surfaces on self‐assembled monolayers (SAMs) on gold in a precise and predictable manner, by harnessing a chemical reaction on the monolayer, and their applications. A quinone derivative on a monolayer was converted to an amine through spontaneous intramolecular cyclization following first‐order reaction kinetics. An amine gradient on the surface on a scale of centimeters was realized by modulating the exposure time of the quinone‐presenting monolayer to the chemical reagent. The resulting amine was used as a chemical handle to attach various molecules to the monolayer with formation of multicomponent gradient surfaces. The effectiveness of this strategy was verified by cyclic voltammetry (CV), matrix assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry (MS), MS imaging, and contact‐angle measurements. As a practical application, cell adhesion was investigated on RGD/PHSRN peptide/peptide gradient surfaces. Peptide PHSRN was found to synergistically enhance cell adhesion at the position where these two ligands are presented in equal amounts, while these peptide ligands were competitively involved in cell adhesion at other positions. This strategy of generating a gradient may be further expandable to the development of functional gradient surfaces of various molecules and materials, such as DNA, proteins, growth factors, and nanoparticles, and could therefore be useful in many fields of research and practical applications.     

Evaluation of bias voltage effect on diamond‐like carbon coating properties deposited on tungsten carbide cobalt

Diamond‐like carbon (DLC) coatings are getting new trends for cutting tool applications. In this research work, the DLC coatings were deposited on 15 × 15 × 5‐mm tungsten carbide cobalt substrates with variation of bias voltage from 0 to 500 V. The DLC films of 400 nm were deposited using filter cathode vacuum arc system, and 100‐nm chromium interlayer was deposited by sputtering. The optimized conditions for plasma pretreatment at different argon flow rates and deposition rates with bias variation were found. The effect of bias voltage on microstructure, tribology, adhesion, and mechanical properties were evaluated. The characterization techniques employed were field emission electron microscopy, Raman spectroscopy, wear test, SEM, scratch test, and nano‐indentation. The effect of substrate pretreatment on film adhesion was also evaluated. It was observed that etching rate increased with the increase in Ar flow rate while DLC deposition and sputtering rates decreased with increase in the bias voltage. The characterization suggests the DLC coatings deposited at 0 V bias as optimum condition because of showing the best results among all other conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

A polyacrylonitrile‐based carbon fiber was electrochemically oxidized in an aqueous ammonium bicarbonate solution with current density of up to 2.76 A/m² at room temperature. X‐ray photoelectron spectroscopy revealed that the oxygen content increased with increasing current density before approaching saturation. The increase can be divided into two regions, the rapid increase region (0–1.78 A/m²) and a plateau region (1.78–2.76 A/m²). The surface chemistry analysis showed that the interlaminar shear strength (ILSS) value of the carbon fiber/epoxy composite could be improved by 24.7%. The carbon structure was examined using Raman spectroscopy in terms of order/disorder in the graphite structure and the results indicated that the relative percentage of graphite carbon in the form of sp² hybridization increased above a current density of 1.39 A/m². The increasing non‐polar graphite carbon on the carbon fiber surface decreased the surface energy. As a result, both the surface free energy () and its polar component () decreased when current density increased above 1.78 A/m². The ILSS value had no direct relationship with the nature and surface density of the oxygen‐containing functional groups nor with the carbon structure. It is the surface free energy (), especially the polar component (), which played a critical role in affecting the interfacial adhesion of carbon fiber/epoxy composites. The ILSS value changed with increasing current density and could be divided into three distinct regions, as chemical interaction region (I), anchor force region (II) and matrix damage region (III). Copyright © 2013 John Wiley & Sons, Ltd.     

Poly(N-isopropylacrylamide)-based thermo-responsive surfaces with controllable cell adhesion

Poly(N-isopropylacrylamide) (PNIPAAm)-based thermo-responsive surfaces can switch their wettability (from wettable to non-wettable) and adhesion (from sticky to non-sticky) according to external temperature changes. These smart surfaces with switchable interfacial properties are playing increasingly important roles in a diverse range of biomedical applications; these controlling cell-adhesion behavior has shown great potential for tissue engineering and disease diagnostics. Herein we reviewed the recent progress of research on PNIPAAm-based thermo-responsive surfaces that can dynamically control cell adhesion behavior. The underlying response mechanisms and influencing factors for PNIPAAm-based surfaces to control cell adhesion are described first. Then, PNIPAAm-modified two-dimensional flat surfaces for cell-sheet engineering and PNIPAAm-modified three-dimensional nanostructured surfaces for diagnostics are summarized. We also provide a future perspective for the development of stimuli-responsive surfaces.