多速率分层结构CDMA系统联合控制算法

本文对多速率分层结构CDMA系统的联合控制算法进行了研究,提出了一种新的功率、速率和接入联合控制算法。在此基础上,考虑到基站发射功率资源受限以及信道的路径损耗、多径衰落和阴影衰落的影响,得到了系统容量与系统各业务负载的数量以及速率间的关系。另外,该联合控制算法使系统能够自适应地调节VBR业务的速率以及获得最大总有效数据速率;同时通过预测新用户接入系统所需的功率资源,来判断系统是否接受接入请求。最后,利用MonteCarlo方法对该系统算法进行了仿真,给出了相应的仿真结果和分析。     

一种针对GJB181过压浪涌要求的保护电路设计

基于输入28.5 VDC,输出总功率180 W的机载计算机电源的设计,为满足"GJB181飞机供电特性"中对飞机用电设备输入28.5 VDC时过压浪涌80 V/50ms的要求,采用检测输入电压并控制MOSFET导通和关断的方法,通过对该电路的理论数据分析及与实际测试数据做比较,模拟了80 V/50 ms过压浪涌的试验,并用示波器记录了测试波形,得出该设计电路在输入28.5 VDC时,可以完全满足GJB181飞机供电特性过压浪涌要求的结论。并通过扩展应用介绍了在其他输入电压类型时过压浪涌保护电路的设计。     

一种机载雷达频率合成器的实验研究

介绍了一种机载合成孔径雷达频率合成器的实验研究。该合成器采用了直接合成与数字锁相相结合的方法，并采用了超轻型、双重隔振技术和高效率开关电源。实现了低功耗、轻重量、小体积和低相位噪声。最后给出了研制结果和实验结论。     

计算串联稳压电路调整管的最大功耗的另一种方法

串联稳压电路主要工作在线性状态,因此调整管的功耗大。很多情况下调整管的损坏系因其功耗过大发热所致,所以计算调整管的最大功耗是选择调整管的关键,但一些教材中对调整管功耗的计算方法不够严密。本文利用最大功率传递定理,对调整管的最大功耗进行了分析计算。     

Robust Transmission Waveform Design for Distributed Multiple‐Radar Systems Based on Low Probability of Intercept

This paper addresses the problem of robust waveform design for distributed multiple‐radar systems (DMRSs) based on low probability of intercept (LPI), where signal‐to‐interference‐plus‐noise ratio (SINR) and mutual information (MI) are utilized as the metrics for target detection and information extraction, respectively. Recognizing that a precise characterization of a target spectrum is impossible to capture in practice, we consider that a target spectrum lies in an uncertainty class bounded by known upper and lower bounds. Based on this model, robust waveform design approaches for the DMRS are developed based on LPI‐SINR and LPI‐MI criteria, where the total transmitting energy is minimized for a given system performance. Numerical results show the effectiveness of the proposed approaches.     

改进自适应中值滤波的图像去噪

传统自适应中值滤波的最大最小窗口尺寸固定,并且其最大最小窗口相差较大时,运算时间较长,去噪效果并小一定最佳。本文针对传统自适应中值滤波算法的不足,提出了改进自适应中值滤波算法,首先根据椒盐噪声的分布特点,从单幅含椒盐噪声图像中估算出椒盐噪声的浓度,并分析噪声浓度与自适应中值滤波窗口尺寸之间的关系,建立它们之间的函数关系一其次根据噪声浓度确定自适应中值滤波的最大最小窗口尺寸,最后对图像进行自适应中值滤波：实验结果表明本文算法运算时间随着噪声浓度的变化而变化,而且从PSNR角度来看本文去噪效果比传统自适应中值滤波效果较好。     

Perturbative Power Counting,Lowest-Index Operators and Their Renormalization in Standard Model Effective Field Theory

We study two aspects of higher dimensional operators in standard model effective field theory.We first introduce a perturbative power counting rule for the entries in the anomalous dimension matrix of operators with equal mass dimension.The power counting is determined by the number of loops and the difference of the indices of the two operators involved,which in turn is defined by assuming that all terms in the standard model Lagrangian have an equal perturbative power.Then we show that the operators with the lowest index are unique at each mass dimension d,i.e.,(H~?H)~(d/2)for even d≥4,and(L~TεH)C(L~TεH)~T(H~?H)~((d-5)/2)for odd d≥5.Here H,L are the Higgs and lepton doublet,andε,C the antisymmetric matrix of rank two and the charge conjugation matrix,respectively.The renormalization group running of these operators can be studied separately from other operators of equal mass dimension at the leading order in power counting.We compute their anomalous dimensions at one loop for general d and find that they are enhanced quadratically in d due to combinatorics.We also make connections with classification of operators in terms of their holomorphic and anti-holomorphic weights.     

10MW串级脉冲发电机的理论、设计、实验及应用研究

 脉冲发电机具有小型、机动、灵活、可靠、寿命长等特点, 作为高功率固体激光器和加速器电源是一新的技术路线。比较了各种类型脉冲电源的性能指标,解释了旋转磁通压缩和串级原理,提出串级脉冲发电机的自激、偏极与双机同壳概念,给出电机的设计公式,10MW串级脉冲发电机的设计、实验及在强激光与粒子束领域中的潜在应用。     

均压环螺栓补装工具的研制

均压环是改善绝缘子串电压分布的环状金具。装在均压环上的螺栓,受大风天气及高压输电线路来回摆动的影响,时间久了会造成螺栓的脱落,从而影响线路的使用。为了解决带电作业情况下远距离安装均压环上脱落的螺栓或螺母,设计研制了均压环螺栓补装工具。通过现场应用发现,研制的工具设计合理,结构紧凑,使用方便。     

808 nm波长光纤耦合高功率半导体激光器

采用柱透镜对半导体激光器（ＬＤ）的输出光束进行了有效收集、预准直及多模光纤之间的耦合实验。采用８０８ｎｍ波长,１５０μｍ条宽结构的激光器件,与２００μｍ芯径平端光纤的耦合效率高达９０％以上,光纤输出功率为１．０Ｗ。分析了影响耦合效率的主要因素