基于Polytec激光测振仪的光存储设备振动测试分析系统

针对光存储设备振动频率高的特点,采用Polytec激光测振仪拾取振动信号,并给出了基于Polytec激光测振仪的光存储设备振动测试分析系统。可用于硬盘盘片、磁头滑块、折臂组件、光盘盘片等振动测试,为光存储设备动态特性的测试和分析建立了良好的实验基础。     

用于双色全息存储(Fe,Cu)∶LiNbO3晶体的参量优化计算

在确定Cu在LiNbO3晶体中对应于365 nm和633 nm的激发系数、复合系数、光伏系数的基础上,采用龙格库塔(Runge-Kutta)数值方法理论研究了双掺杂(Fe,Cu)∶LiNbO3晶体的深浅能级的掺杂组分比、氧化还原状态对双色全息存储的记录灵敏度和动态范围的影响,并探讨了同时取得尽可能大的灵敏度和动态范围的晶体条件。结果表明,为了同时得到较大的记录灵敏度和动态范围,在实际应用中选用浅能级掺杂浓度为5.0×1025m-3,深能级掺杂浓度为3×1024~3×1025m-3之间的弱氧化晶体是合适的。     

交换弹性磁性材料的研究进展

对近年来交换弹性磁性材料（包括高性能永磁和磁存储介质）等方面的最新研究进展作了一些简单的综述，总结了存在的一些问题并指出了用以解决这些问题的可能途径，为进一步的深入研究提供参考。     

The role of nucleation field of media in heat-assisted magnetic probe recording

We characterize a method of heat-assisted magnetic probe recording on perpendicular media. Heating source is field emission current from a scanning tunneling microscope (STM) tip. Recording media are three kinds of magnetic films, Co/Pt, CoNi/Pt, and Co/Pd multilayers with different nucleation fields. Pulses with amplitude of 5 V were applied between the STM tip and the recording medium. Experiments show that magnetic marks with an average size of 180 nm were formed on both Co/Pt and CoNi/Pt films whose nucleation fields are greater than their saturation magnetization. No marks were observed on the Co/Pd film whose nucleation field is smaller than its saturation magnetization. A model is built to simulate the dynamic process of domain formation in probe-based magnetic recording system. Simulation results agree with experiments and it explains the effect of the nucleation field of medium in perpendicular recording.     

Magnetic evaluation of advanced metal-evaporated tape in an advanced linear tape drive

Demand for increased data storage has resulted in the development of various types of magnetic tapes. To achieve higher recording density, tape manufacturers are developing thin-film tapes, such as advanced metal-evaporated (AME) tape, for use in linear tape drives. In recent studies, these new AME tapes have demonstrated sustainable mechanical durability at low tensions suitable for use in linear tape drives. An evaluation of the magnetic performance of these AME tapes including the impact of tape cupping and initial edge quality was the goal of this study. Head output, dropouts, head–tape interface friction, and lateral tape motion (LTM) were monitored throughout testing. As track widths continue to narrow, LTM has become one of the critical limitations of magnetic performance. To more accurately measure LTM during drive development, a new method involving the output voltage of a head-read element that has been adjusted to be halfway off the recorded track on tape was implemented (LTM_M). It is shown that positively cupped AME tapes will result in similar head output and fewer dropouts than the current MP tapes. The negatively cupped AME sample produced the lowest head output data and the highest amount of dropouts of all the tapes evaluated in this investigation. All the tapes evaluated demonstrated similar values of LTM when monitored at the center of the tape. When LTM was monitored at the lower edge of the tape, the positively cupped AME tape with the worst relative edge contour length resulted in the highest LTM_M. As found in previous studies, AME tapes produced slightly lower values of coefficient of friction than the MP tapes. From this investigation, positively cupped AME tapes with good initial relative edge contour length are recommended for use in linear tape drives, similar to those used in this study.     

Fabrication and magnetic property of binary Co-Ni nanowire array by alternating current electrodeposition

Ordered binary Co-Ni nanowire arrays with different components have successfully been fabricated by ac electrodeposition. The as-obtained nanowires exhibit a diameter of about 49.2 nm and aspect ratio of more than 30. A highly preferential orientation of the Co-Ni nanowires has been obtained by XRD. The magnetic properties of Co-Ni nanowire arrays determined by VSM are as the function of the Co-Ni components. The maximum value of coercivities perpendicular to the array is 2073 Oe. However, the magnetic properties of such nanowire arrays exhibited a bad thermal stability at the medium temperature of 200 °C.     

便携式近红外漫反射中药质量监控仪的研制

介绍了便携式近红外漫反射中药质量监控仪的设计思想、基本结构、测试条件和使用方法。该光谱仪具有体积小、重量轻、成本低等特点,现场监控中药质量是非常便利的。     

高精度测量酒精浓度的光纤传感技术

为了研究低含水溶液中水或者其它溶质浓度的高精度测量问题,采用近红外光谱吸收原理和光纤传感器技术,提出了一种高精度酒精含水率测量的方法和实验系统,得到了测量结果:体积含水率在0%～5 %的测量范围内,体积含水率的测量分辨率好于0.005%;体积含水率在0%～1%范围内,测量误差可达±0.01%.结果表明,该方法具有测量速度快,精度高,对油品无污染,适合于长期在线连续测量的特点.     

ZnSe宽带隙半导体光发射器件

ZnSe宽带隙半导体光发射器件是未来全色光显示和高密度光记录用的重要器件。在相继完成材料、掺杂技术，以及器件结构相关的研究工作后，目前正在攻克器件实用化的关键技术——寿命。介绍了ZnSe的p型和n型导电材料的控制技术及其LD和LED的开发进展。     

Monochromator Wavelength Calibration Standards Extending into the Near-Infrared Using Second- and Third-Order Emission Lines from Mercury Vapor Lamps

The emission spectra of four mercury vapor lamps are used to obtain wavelength calibration curves for the double-grating emission monochromator of a spectrofluorimeter. The use of second- and third-order diffraction lines and emission lines from the argon carrier gas provides a rich spectrum, which extends well into the near-infrared spectral region and produces an improved calibration curve. More than 60 emission lines are listed between 250 and 900 nm, which is sufficient to produce an extremely accurate monochromator calibration. Additional second- and third-order lines can be used to even longer wavelengths (>1200 nm). The effectiveness of three scattering surfaces is compared.