The transient suppression for piezoelectric ceramic emission transducer

A transient suppression method for piezoelectric ceramic transducer is presented. By adding some special pedestal pulses to the original transmitted signal, the transient effects in the output of the transducer can be just precisely transmission by use of a narrowband transducer. canceled, thereby achieving the broadband The experimental results show that the transient responses of the sinusoid pulses and coded signals are suppressed successfully and the acoustic waveforms radiated into the surrounding water are improved significantly.     

宽截止窄带高反射滤光膜设计

窄带高反射滤光膜在光通讯、光学探测仪器等领域有着重要应用.探讨了"基片|H(LH)m1aL(HL)m2βCr,M|空气"膜系结构的窄带高反射滤光膜系,讨论了金属Cr层厚度,以及两种不同的匹配膜系对滤光膜特性的影响,计算了Cr层内部的电场分布.结果表明,较厚的金属层可实现更宽的截止带宽,匹配层的加入有效地实现了宽截止带的深截止,使中心波长处导纳为较大值的匹配膜系可以更好地实现滤光膜宽截止、窄带高反射特性;匹配膜层使中心波长处Cr层内部的电场强度趋于零,有效地降低了整个膜系的吸收,提高了反射率.     

高斯光束对标准硅球直径测量的影响分析

针对高精度硅球直径测量系统的特点,分析平面波反射光的多光束干涉和双光束干涉,以及正入射时高斯光束反射光中心的多光束干涉和双光束干涉,对不同条件下的高斯光束反射光中心的干涉光强进行了数值模拟.对采用五步相移算法时高斯多光束干涉的影响进行了研究,给出了特定参数条件下不同束腰ω0和传播距离z时的最大相位误差,当ω0=5 mm,z=2000 mm时的最大相位误差达0.08%.     

Evaluation of coherent homodyne and heterodyne optical CDMA structures

This paper evaluates the coherent optical code-division multiple-access (OCDMA) techniques and examines the overall system performance in terms of signal-to-noise ratio (SNR) penalty as a function of simultaneous users accommodated to maintain an appropriate value of the bit-error rate (BER) for homodyne and heterodyne detections. As spreading codes, the proposed structures are utilizing a recently introduced prime code family hereby referred to as double-padded modified prime code (DPMPC). As a coherent modulation, binary phase-shift keying (BPSK) format is deployed. In homodyne detection, two different phase modulations are studied including either an external phase-modulator or injection-locking methods. The phase limitation and the performance for two methods plus multiple-access interferences (MAI) and receiver noise in a shot-noise limited regime are investigated. In heterodyne detection, BER analysis of the system based on only external phase modulator is examined. It is found that by maintaining BER = 10⁻⁹, this system can accommodate an increased number of simultaneous users to compare with systems which employ conventional bipolar codes.     

Development of ultrahigh-precision coherent control and its applications

Coherent control is based on optical manipulation of the amplitudes and phases of wave functions. It is expected to be a key technique to develop novel quantum technologies such as bond-selective chemistry and quantum computing, and to better understand the quantum worldview founded on wave-particle duality. We have developed high-precision coherent control by imprinting optical amplitudes and phases of ultrashort laser pulses on the quantum amplitudes and phases of molecular wave functions. The history and perspective of coherent control and our recent achievements are described.     

不同记录光强下辅助紫光对菌紫质薄膜全息衍射效率的影响

具有光致变色效应的菌紫质薄膜可用作可擦重写型全息记录介质. 在全息记录过程中,由于菌紫质薄膜对记录光的散射和反射引起记录光栅对比度下降,当记录光较弱时,这种影响较小,可以忽略;但当记录光较强时,散射和反射光对记录光栅的影响很大,必须考虑它们对光栅对比度的影响才能对实验结果进行合理的解释. 实验发现在不同的记录光强下辅助紫光对衍射效率动力学曲线的影响不同,当记录光强较弱时,加入辅助紫光可以提高衍射效率的稳定值、抑制峰值;而当记录光强较强时,加入辅助紫光除了提高衍射效率的稳定值外,还可以提高衍射效率的峰值. 关键词： 菌紫质 衍射效率 干涉条纹对比度     

测量单泡声致发光中气泡R(t)曲线的前向Mie散射技术

光干涉原理和Mie理论计算结果表明,单泡声致发光中气泡前向Mie散射的振荡信号,主要是由于气泡的透射光束和表面反射光束之间光干涉产生的. 这些干涉波峰形成了测量气泡半径的空间标尺,标尺的单位长度δR由散射角θ,检测光波波长和流体光折射率确定,而每个波峰就是标尺的刻线,它们与该时刻的气泡半径大小一一对应. 在30°—50°散射角范围内,利用前向Mie散射实验测定了单泡声致发光中气泡的最大半径,R(t)曲线及平衡半径,表明前向Mie散射是一种便捷的测定气泡运动特性的有效方法. 关键词： 单泡声致发光 前向Mie散射 光干涉     

用电光采样法测量相对论电子束团长度

介绍了电光采样法测量电子束束团长度的实验原理和装置,理论分析并模拟计算了被测电子束团库仑场分布、ZnTe晶体的电光效应与束团电场的关系,并利用琼斯矩阵法分析了探测光通过电光晶体时在束团电场作用下的偏振变化、测量信号与束团长度的关系等。分析表明:测量中应使束团库仑场垂直于ZnTe的［001］方向,探测光偏振方向与ZnTe晶体y″轴成45°或者135°夹角,1/4波片快轴与探测光偏振方向夹角应取45°,这时平衡探测器输出信号与束团库仑场Eb成正比。1/4波片的作用是将电光晶体的工作点从非线性段移到线性段,平衡探测的作用是简化信号与Eb的关系,并提高信噪比。为实际测量应用提供参考。     

透明薄膜的干涉相干峰分离算法

白光干涉技术具有高度唯一性,广泛地被使用在三维表面形貌和台阶高度的测量。但是测量透明薄膜时,薄膜表面和基面都有光线反射与参考光线交汇,在被测表面的同一个位置不同高度两次产生干涉条纹,其干涉相干图中出现两个峰值。通过分析透明薄膜产生的干涉相干图的特点,提出了两种算法用来分离不同表面产生的干涉条纹。理论分析和试验结果表明,利用垂直扫描白光干涉法测量透明薄膜,由峰值分离算法和定位算法分别提取薄膜的上下表面,能够得到透明薄膜的高精度三维形貌和厚度信息。