Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

Direct Observation of the Binding Mode of the Phosphonate Anchor to Nanosized Polyoxotitanate Clusters

The structures of three newly synthesized phosphonate‐substituted polyoxotitanates are reported. The Ti/O core of [Ti₄O(OEt)₁₂(PhenylPO₃)] ( 1 ) is the building block for two larger phosphonate‐substituted nanoclusters, [Ti₂₅O₂₆(OEt)₃₆(PhenylPO₃)₆] ( 2 ) and [Ti₂₆O₂₆(OEt)₃₉(PhenylPO₃)₆]Br ( 3 ). All compounds exhibit a not previously recognized triply bridging binding mode of the phosphonate anchor with short connecting Ti? O bonds, the average of which is 2.010(7) Å. Comparison with previously reported work suggests that the binding mode of the phosphonate anchor is strongly dependent on the structure of the underlying substrate.     

Morphological Investigation of Midblock‐Sulfonated Block Ionomers Prepared from Solvents Differing in Polarity

Recent developments regarding charged multiblock copolymers that can form physical networks and exhibit robust mechanical properties herald new and exciting opportunities for contemporary technologies requiring amphiphilic attributes. Due to the presence of strong interactions, however, control over the phase behavior of such materials remains challenging, especially since their morphologies can be solvent‐templated. In this study, transmission electron microscopy and microtomography are employed to examine the morphological characteristics of midblock‐sulfonated pentablock ionomers prepared from solvents differing in polarity. Resultant images confirm that discrete, spherical ion‐rich microdomains form in films cast from a relatively nonpolar solvent, whereas an apparently mixed morphology with a continuous ion‐rich pathway is generated when the casting solvent is more highly polar. Detailed 3D analysis of the morphological characteristics confirms the coexistence of hexagonally‐packed nonpolar cylinders and lamellae, which facilitates the diffusion of ions and/or other polar species through the nanostructured medium.

     

Formation of Hierarchical Lamellae‐in‐Lamella Nanostructures from Polymer Blends Via Controlled Nonequilibrium Freezing

The creation of hierarchical nanostructures in polymeric materials has been intensively studied due to the great potential to tailor their physicochemical properties. Although much success has been achieved over the past decades in block copolymers, hierarchical structure engineering in polymer blends remains a great challenge. Here, the formation of hierarchical lamellae‐in‐lamella nanostructures from polymer blends via controlled nonequilibrium freezing is reported. Polymer blends are first dissolved in molten hexamethylbenzene (HMB) to form a homogeneous melt. When cooled to below its melting temperature, the HMB is crystallized and depleted, and the polymers are directionally solidified. This process is rapid enough that phase separation of the polymer blends is kinetically trapped at the nanoscale level. Then, the polymer blend epitaxially crystallizes onto the HMB inside the nanophase, resulting in the hierarchical lamellae‐in‐lamella structure. This structure is stable under ambient conditions and tunable depending on the annealing temperature and blending ratio.

     

Confinement of CuII–Phthalocyanine in a Bioinspired Hybrid Nanoparticle‐Assembled Structure Yields Selective and Stable Epoxidation Catalysts

Herein, we demonstrate that a bioinspired assembly of silica nanoparticles with polyamines as structure‐directing agents similar to that known for the biosilicification of diatoms can pave the way for the efficient encapsulation of sulfonated copper–phthalocyanine in a hybrid microcapsule structure, in which the organic component provides a capable environment for its catalytic activity in epoxidation reactions and the nanoassembled structure imparts stability.     

Telluride Misfit Layer Compounds: [(PbTe)1.17]m(TiTe2)n

Telluride misfit layer compounds are reported for the first time. These compounds were synthesized using a novel approach of structurally designing a precursor that would form the desired product upon low‐temperature annealing, which allows the synthesis of kinetically stable products that do not appear on the equilibrium phase diagram. Four new compounds of the [(PbTe)_1.17]_m(TiTe₂)_n family are reported, and their structures were examined by a variety of X‐ray diffraction techniques.     

分级纳米材料的结构、制备及其应用

纳米材料因其独特的表面效应、体积效应和量子效应等特点,在化工、生物工程、医学和能源等领域有着广阔的应用。 由简单的低维纳米结构作为主要的构建单元并按照特定的排列方式组装成规整有序的三维结构,即分级纳米结构,已经开展了许多的研究。 本文综述了分级纳米结构的制备方法和微观结构,及其在污水处理、超级电容器、太阳能电池以及光催化等领域的应用。     

Template‐Free Hydrothermal Synthesis of Mesoporous MgO Nanostructures and Their Applications in Water Treatment

The controlled synthesis of Mg(OH)₂ nanowires and microflowers composed of nanoplates was successfully achieved by a template‐free hydrothermal synthetic method. It was found that the reaction medium played a crucial role in the morphological control of the precursor nanostructures. The high polarity of water molecules favored the polar growth of the precursor, resulting in the formation of nanowires with a diameter of 80 nm, whereas a mixed water/ethanol medium with a lower degree of polarity led to the formation of microflowers. Moreover, mesoporous MgO nanostructures could be obtained by further annealing these as‐prepared precursors in air at 500 °C for 2 h. During thermal treatment, the wire‐ and flower‐like morphologies were retained. Porosity formation was due to thermal decomposition of Mg(OH)₂ and release of H₂O. Both the mesoporous MgO nanowires and microflowers showed superior ability of adsorbing the organic dye methyl orange, and thus they are promising candidates for polluted water treatment.     

Luminescence of II–VI and III–V nanostructures

Photoluminescence of HgCdTe epitaxial films and nanostructures and electroluminescence of InAs(Sb,P) light-emitting diode (LED) nanoheterostructures were studied. For HgCdTe-based structures, the presence of compositional fluctuations, which localized charge carriers, was established. A model, which described the effect of the fluctuations on the rate of the radiative recombination, the shape of luminescence spectra and the position of their peaks, was shown to describe experimental photoluminescence data quite reasonably. For InAs(Sb,P) LED nanoheterostructures, at low temperatures (4.2–100 K) stimulated emission was observed. This effect disappeared with the temperature increasing due to the resonant ‘switch-on’ of the Auger process involving transition of a hole to the spin-orbit-splitted band. Influence of other Auger processes on the emissive properties of the nanoheterostructures was also observed. Prospects of employing II–VI and III–V nanostructures in light-emitting devices operating in the mid-infrared part of the spectrum are discussed.