Massively parallel mesh adaptation and linear system solution for multiphase flows

ABSTRACT

In this paper, a work performed to allow massively parallel finite element flow computations is presented. It includes the development and optimisation of two particular features of a finite element multiphase computational fluid dynamics software, which are mesh generation and linear system solution, using anisotropic adaptation and multigrid preconditioning. Parallel performances on supercomputers are shown, where the largest generated mesh (on 65 536 Intel Xeon or 261 144 Power PC cores) had 33.4 billions of nodes, leading to a 100 billion of unknowns linear system solution. Final applications concern, between others, image-based flow simulations.     

固体废弃物铝灰和粉煤灰原位合成Spinel-Sialon复相材料的研究

本文利用铝灰和粉煤灰为原料,经原位铝热还原氮化法合成了Spinel-Sialon复相材料。通过XRD、SEM、EDS等分析手段,研究了合成温度和还原剂铝的添加量对合成产物物相及微观形貌的影响。结果表明:合成Spinel-Sialon的优化工艺参数为铝的添加量为过量100%、合成温度为1550℃,保温时间3 h,合成得到发育良好的柱状β-Sialon及八面体形的镁铝尖晶石。合成温度、还原剂铝的添加量均是影响氮化产物的重要因素。随着温度的升高或还原剂铝的添加量增多,Al2O3越来越少,β-Sialon和镁铝尖晶石均增多,且β-Sialon的Z值增大,MgAl2O4转变成富铝尖晶石。     

Multiphase thermoplastic hybrid for controlled release of antimicrobial essential oils in active packaging film

Active packaging, a new technology concept in the field of food packaging, has been introduced in recent years in order to provide quality and safety, as well as extend the shelf life of food products. Antimicrobial (AM) agents can be incorporated directly into the active packaging and migrate in a controlled manner to the headspace between the food and the package, inhibiting bacteria growth on the food surface. Naturally derived AM agent, such as essential oils (EOs), has received considerable attention for food preservation purposes, because of their effective AM activity against various bacteria and fungi. In the present study, AM active film systems based on polypropylene/polyamide blends, montmorillonite nanoclays, and thymol EO were produced to investigate the feasibility of controlling the release rate of thymol from food packaging systems. Selective localization of thymol in a specific phase in the system that derives from thermodynamic affinity was assumed to be useful in controlling its migration rate from the film to the headspace. EO retention in the film under two different time conditions was measured by spectroscopic analysis. The release rate of EO was determined using Gas chromatography technique and analyzed by diffusion model approach. Inhibition of bacterial growth was periodically tested for Listeria and Escherichia coli bacteria. This study confirms the thermodynamic affinity of polyamide phase with thymol that has a positive effect in retaining the EO. Results show controlled AM behavior of the active packaging films, based on various blend compositions. Copyright © 2016 John Wiley & Sons, Ltd.     

基于延时锁定环的时间数字转换器设计

A time-to-digital converter(TDC) based on a reset-free and anti-harmonic delay-locked loop(DLL) circuit for wireless positioning systems is discussed and described. The DLL that generates 32-phase clocks and a cycle period detector is employed to avoid "false locking". Driven by multiphase clocks, an encoder detects pulses and outputs the phase of the clock when the pulse arrives. The proposed TDC was implemented in SMIC 0.18 m CMOS technology, and its core area occupies 0.7 0.55 mm2. The reference frequency ranges from 20 to 150 MHz. An LSB resolution of 521 ps can be achieved by using a reference clock of 60 MHz and the DNL is less than 0.75 LSB. It dissipates 31.5 mW at 1.8 V supply voltage.     

准直磨料射流在准直管内流动机理及切割应用研究

分析了准直磨料射流的工作原理、特点及高速多相流体介质在准直管内有阻运动时的磨粒运动方程式。研究表明,准直管管长在０．４ｍ～３ｍ范围内磨粒速度基本保持不变,准直管长度、直径、供料量和磨粒型号等参数之间存在最佳配合关系。本为使用准直磨料射流进行切割和冲蚀的工程应用提供了初步的理论基础。     

多相DC-DC主板电源控制器的设计

采用1.2μmBiCMOS工艺设制了多相控制器电路.测试结果表明,该控制器符合Intel公司为P4处理器电源制定的VRM9.0标准.     

The Law of the Iterated Logarithm for Extreme Waiting Time in Multiphase Queueing Systems

The objective of this research in the queueing theory is the law of the iterated logarithm (LIL) under the conditions of heavy traffic in multiphase queueing systems (MQS). In this paper, the LIL is proved for the extreme values of some important probabilistic characteristics of the MQS, namely, maxima and minima of the summary waiting time of a customer, and maxima and minima of the waiting time of a customer.     

3D modeling of crack growth in electro-magneto-thermo-elastic coupled viscoplastic multiphase composites

This work presents a time-domain hypersingular integral equation (TD-HIE) method for modeling 3D crack growth in electro-magneto-thermo-elastic coupled viscoplastic multiphase composites (EMTE-CVP-MCs) under extended incremental loads rate through intricate theoretical analysis and numerical simulations. Using Green’s functions, the extended general incremental displacement rate solutions are obtained by time-domain boundary element method. Three-dimensional arbitrary crack growth problem in EMTE-CVP-MCs is reduced to solving a set of TD-HIEs coupled with boundary integral equations, in which the unknown functions are the extended incremental displacement discontinuities gradient. Then, the behavior of the extended incremental displacement discontinuities gradient around the crack front terminating at the interface is analyzed by the time-domain main-part analysis method of TD-HIE. Also, analytical solutions of the extended singular incremental stresses gradient and extended incremental integral near the crack fronts in EMTE-CVP-MCs are provided. In addition, a numerical method of the TD-HIE for a 3D crack subjected to extended incremental loads rate is put forward with the extended incremental displacement discontinuities gradient approximated by the product of time-domain basic density functions and polynomials. Finally, examples are presented to demonstrate the application of the proposed method.     

Heat Transport in Unsaturated Zone Thermal Energy Storage – Analysis with Two-Phase and Single-Phase Models

We analyze a field experiment where ambient air is injected into the soil during the summer and extracted again during the winter. A multiphase model accounting for the conductive transport as well as the convective transport with the moving liquid and gas phases is used along with a more simplified single-phase model where the convective transport is due to the gas alone. The latter model also accounts for subzero wintertime temperatures. The multiphase model captures well both the seasonal variations and the actual test sequence, the main calibration being in the adjustment of medium permeabilities based on the observed pressure responses. The effect of the injection pump on the temperature and humidity of the injection air needs to be known accurately. Taking into account the humidity of the injection air explicitly instead of using humidity-corrected enthalpy values also has an effect. The effect of various humidity and specific enthalpy assumptions is of the order of 1–1.5°C, while ignoring the wintertime subzero temperatures has an effect of 1–2°C. These differences are of the same order of magnitude as the heterogeneity-introduced differences in field data. Using the simplified single-phase model typically appears to cause a difference of 1–2°C, but can yield an even higher deviation of the order of 3–4°C.     

Pore Scale Modeling of Rate Effects in Imbibition

We use pore scale network modeling to study the effects of flow rate and contact angle on imbibition relative permeabilities. The model accounts for flow in wetting layers that occupy roughness or crevices in the pore space. Viscous forces are accounted for by solving for the wetting phase pressure and assuming a fixed conductance in wetting layers. Three-dimensional simulations model granular media, whereas two-dimensional runs represent fracture flow.We identify five generic types of displacement pattern as we vary capillary number, contact angle, and initial wetting phase saturation: flat frontal advance, dendritic frontal advance, bond percolation, compact cluster growth, and ramified cluster growth. Using phase diagrams we quantify the range of physical properties under which each regime is observed. The work explains apparently inconsistent experimental measurements of relative permeability in granular media and fractures.