Optical bistability in an all-optical fiber nonlinear fabry-perot resonator with linear absorption

An all-optical fiber nonlinear Fabry-Perot resonator is proposed. The steady-state model for describing this resonator is developed. The transmission and refection bistabilities are shown numerically. Our results show that the bistability in this system is similar to that in a normal nonlinear Fabry-Perot etalon, except that the characteristics of the bistability can be changed not only by the cavity length but also by the phase shifts of the fiber loop mirrors.     

用单透镜变换由多模光纤出射的大功率Nd：YAG激光束的特性

根据理论假设，通过选取单透镜的参数和位置，计算说明了单透镜使经由多模光纤出射的大功率Ｎｄ：ＹＡＧ激光束的发射角压缩，光束聚焦效率提高，光束截面场为高斯分布；文中的计算结果符合已知规律，从而说明了理论假设的正确性。     

折射率温敏式光纤温度传感器的理论模型

提出了折射率温敏式光纤温度传感器的理论模型，包括子午光线和偏射光线的影响，讨论了多模光纤的弯曲损耗，理论的分析和结果与实验相当一致。     

谐振式力传感器敏感结构的研究

利用材料力学及弹性力学法，对石英晶体谐振式力传感器的悬臂梁结构进行了研究，得出了双梁单岛及三梁单岛悬臂梁结构的力转移系数，在与实验结果进行了比较后证明，支承结构的理论推导与实验结果一致。     

Study on the possibilities of controlling the laser output beam properties by an intracavity deformable mirror

The possibilities of controlling the laser beam properties by a deformable mirror introduced into the laser optical cavity were studied theoretically and experimentally. The experiments were performed under conditions of an industrial high power transverse flow cw CO₂ laser operating with a stable resonator of a folded configuration. A deformable bimorph mirror of a surface profile controlled by the voltage applied to the mirror electrodes is implemented to the laser system as a back cavity mirror or as a one of the inner folding mirrors. The near-and far-field characteristics of the laser beam versus the resonator configuration controlled by the changes of the focal length of the deformable mirror are discussed in the paper. The analysis reveals that the resonator with an inner deformable mirror is much more sensitive to the mirror curvature variations than the resonator in which the deformable mirror is used as a back cavity mirror. The presented results show that dynamic and controllable changes in the resonator properties result in the controlled modification and optimisation of the laser output power and spatial parameters of the laser radiation.     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论     

空间非相干多分量光束构成的非相干耦合屏蔽孤子对

两束本身具有空间非相干性的非相干多分量光束可以在光折变介质中形成非相干耦合 屏蔽孤子对，利用相干密度法得到了亮 亮、暗 暗型耦合孤子对的解，并研究了构成 非相干孤子对分量光束的相干组分的传播特性. 关键词： 空间非相干多分量光束 耦合孤子对 相干密度 相干组分     

多模干涉型集成光学器件研究进展

基于自镜像效应(SIE)的多模干涉(MMI)型集成光学器件是集成光学中具有广泛用途的重要器件。本文详细而系统地综述了近几年来MMI器在国内外的研究进展，特别是其在集成光学中的应用。     

Analysis of Antennas with PBG Substrate

The use of photonic materials has been used in the theory of optical waves. The PBG (Photonic Band Gap) theory and material, was developed recently for optical frequencies and can be easily applied to millimeter waves, microwaves and planar antenna frequencies. The presence of photonic materials as substrate in antennas has some good characteristics such as, supression of light spontaneous emission and suppression of surface waves, allowing the application in planar antenna array. In this work an elaborate analysis using the full wave Transverse Transmission Line - TTL method, that provides efficient and concise results is applied to the planar antennas array with PBG substrate.     

多模光纤出射的光通过透镜后的场分布

用部分相干光理论,研究了单模激光入射的多模光纤出射的光经透镜后,在菲涅尔衍射区内场的分布。