About different types of water in swollen polyelectrolyte multilayers

The review addresses swelling of polyelectrolyte multilayers in water. Different models for the determination of the water content are compared. It is clearly shown that voids under dry conditions present cavities for water which contribute to the water content of the multilayer in the swollen state. This so-called “void water” does not lead to any changes in thickness but in scattering length density during swelling. The “swelling water” leads to both changes in scattering length density and in thickness. Depending on the preparation conditions like the type polymers, polymer charge density, ionic strength and type of salt the ratio of “void water” differs between 1 and 15 vol.% while the amount of “swelling water” is of several ten's of vol.%.     

Gallium and indium co‐doped ZnO thin films for white light emitting diodes

Ga and In co‐doped ZnO (GIZO) thin films together with ZnO, In‐doped ZnO (IZO), Ga‐doped ZnO (GZO), and IZO/GZO multilayer for comparison, were grown on corning glass and boron doped Si substrates by PLD. The photoluminescence spectra of GIZO showed a strong white light emission and the current–voltage characteristics showed relatively lower turn‐on voltage and larger forward current. The CIE coordinates for GIZO were observed to be (0.31, 0.33) with a correlated colour temperature of 6650 K, indicating a cool white light, and establishing a possibility of white light emitting diodes. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Measurement of lithium diffusion coefficient in thin metallic multilayer by neutron depth profiling

Diffusion of Li ions in thin sandwich films with copper or lead encompassing layers (obtained by ion beam sputtering deposition technique) has been studied. These metals are promising candidates for electrodes in lithium-ion batteries. It is because they exhibit an ability to store and release Li ions during charging and discharging processes. Lithium diffusion was induced in samples by thermal annealing cycles. The lithium depth profile was measured using a nondestructive neutron depth profiling technique after each thermal annealing step. The analysis of experimental data allowed to evaluate the lithium depth profiles and directly calculate the diffusion coefficients.     

Microscopic origin of asymmetric magnetization reversal of Co/Pt multilayers with perpendicular magnetic anisotropy

We have comprehensively investigated asymmetric magnetization reversal behaviors of (x-Å Co/7.7 Å Pt)₅ multilayers (x = 3.1 and 4.7) with perpendicular magnetic anisotropy. Our direct observation of magnetic domain structures by means of magneto-optical microscopy reveals that the asymmetry arises both from nucleation and wall-motion processes. An asymmetric nucleation behavior is observed, which could be originated from the preexisting non-reversed domains which might have a reproducible or random spatial distribution, controllable by tuning the field profile. An asymmetric wall-motion behavior stemming from asymmetric stripe domain evolution is also observed.     

基于石墨烯和量子点自组装膜的能量转移构筑的高灵敏度DNA界面荧光传感

以QDs作为荧光探针, HIV1病毒序列DNA为研究对象, 设计了Quartz/PDDA/PSS/PDDA/CdTe/ssDNA自组装膜, 利用氧化石墨烯(GO)猝灭自组装膜上CdTe QDs的荧光, 而靶DNA(tDNA)与自组装膜表面ssDNA的互补配对作用使GO与CdTe QDs的距离增加, 导致自组装膜上量子点的荧光恢复, 由此建立了一种基于GO与QDs自组装膜之间荧光共振能量转移的快速灵敏检测DNA的界面分析方法, 检出限为7.26×10^-14 mol/L. 本方法制备的DNA探针操作简单, 自组装膜表面修饰的ssDNA提高了方法的选择性, GO的猝灭作用降低了检测背景, 极大地提高了荧光分析方法的灵敏度.     

Detection of water in jet fuel using layer-by-layer thin film coated long period grating sensor

The quantitative measurement of jet fuel additives in the field is of interest to the Air Force. The “smart nozzle” project was designed as a state-of-the-art diagnostics package attached to a single-point refueling nozzle for assessing key fuel properties as the fuel is dispensed. The objective of the work was to show proof of concept that a layer-by-layer thin film and long period grating fibers could be used to detect the presence of water in jet fuel. The data for the nafion/PDMA film and a long period grating fiber is a combination capable of quantitative measurement of water in kerosene. The average response (spectral loss wavelength shift) to the kerosene sample ranged from −6.0 for 15 ppm to −126.5 for 60 ppm water. The average calculated value for the check standard was 21.71 and ranged from 21.25 to 22.00 with a true value of 22.5 ppm water. Potential interferences were observed and are judged to be insignificant in real samples.     

Design of fluorescent self-assembled multilayers and interfacial sensing for organophosphorus pesticides

This paper details the fabrication of indole (ID) self-assembled multilayers (SAMs) and fluorescence interfacial sensing for organophosphorus (OP) pesticides. Quartz/APES/AuNP/l-Cys/ID film was constructed on l-cysteine modified Quartz/APES/AuNP surface via electrostatic attraction between ID and l-cysteine. Cyclic voltammetry indicates that ID is immobilized successfully on the gold surface. Fluorescence of the Quartz/APES/AuNP/l-Cys/ID film shows sensitive response toward OPs. The fluorescent sensing conditions of the SAMs are optimized that allow linear fluorescence response for methylparathion and monocrotophos over 5.97 × 10⁻⁷ to 3.51 × 10⁻⁶ g L⁻¹ and 3.98 × 10⁻⁶ to 3.47 × 10⁻⁵ g L⁻¹, with detection limit of 6.1 × 10⁻⁸ gL⁻¹ and 3.28 × 10⁻⁶ gL⁻¹, respectively. Compared to bulk phase detection, interfacial fluorescence sensing based on the SAMs technology shows higher sensitivity by at least 2 order of magnitude.     

Properties of In situ polymerized poly(3,4‐ethylenedioxythiophene)/alumina composites for energy storage applications

Composites formed by poly(3,4‐ethylenedioxythiophene) and alumina (PEDOT/Al₂O₃) have been prepared by in situ anodic polymerization. For this purpose, the stability of 1:1 and 4:1 monomer:alumina aqueous solutions has been examined as a function of the pH (2.3, 4.0, 7.0, 8.8, or 10.8). Results indicate that the monomer behaves as a dispersant that remains stable at the studied basic pHs despite they are close to the isoelectric point of alumina. Although the thermal stability of the composites is considerably affected by the pH of the reaction medium, its influence on the surface morphology is very small. Independently, of the synthetic conditions, the electrochemical properties were better for PEDOT/Al₂O₃ than for pure PEDOT, reflecting that alumina particles promote the charge mobility. The highest specific capacitance (SC; 141 F/g), which was 55% higher than that obtained for pure PEDOT, was achieved for the composite prepared at pH = 8.8 using a 4:1 monomer:alumina ratio. These conditions favor the participation of OH^– groups as secondary doping agents without degrading the polymer matrix and enhance the specific surface of the films, facilitating the ionic mobility. On the other hand, application of a multi‐step polymerization strategy has shown that interfaces originated by consecutive steps enhance the SC. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1131–1141     

Ab initio calculations of magnetic structure and lattice dynamics of Fe/Pt multilayers

The magnetization distribution, its energetic characterization by the interlayer coupling constants and lattice dynamics of (001)-oriented Fe/Pt multilayers are investigated using density functional theory combined with the direct method to determine phonon frequencies. It is found that ferromagnetic order between consecutive Fe layers is favoured, with the enhanced magnetic moments at the interface. The bilinear and biquadratic coupling coefficients between Fe layers are shown to saturate fast with increasing thickness of nonmagnetic Pt layers which separate them. The phonon calculations demonstrate a rather strong dependence of partial iron phonon densities of states on the actual position of Fe monolayer in the multilayer structure.