烷类特种气体分析装置的研制及其应用

研制烷类特种气体分析专用的多维气相色谱仪，特制的热导检测器，具有手动－自动功能。设计了输气－配气装置和多维气相色谱流程。以微机控制，可按编辑程序清洗系统。检查本底，自动进样，显示或打印谱图和分析结果。可检测多种烷类特种气体组份及其中氧，氮，一氧化碳和甲烷等痕量杂质。     

Synthesis of anodic silicon oxide films in water-organic solutions containing orthophosphoric acid

Variations in electrophysical properties of anodic silicon oxide at the surface of semiconductor silicon are studied as a function of the composition of electrolytic solutions containing orthophosphoric acid and the conditions of reaching the final formation potential. The optimum conditions for the formation of anodic SiO₂ coatings that include phosphorus-containing admixtures are determined, the coatings being intended for application as diffusates in nanoelectronics.     

Growth of silicon thin film by LPE on porous silicon bilayers

The fabrication of solar cells based on the transfer of a thin silicon film on a foreign substrate is an attractive way to realise cheap and efficient photovoltaic devices. The aim of this work is to realise a thin mono-crystalline silicon film on a double porous silicon layer in order to detach and transfer it on mullite. The first step is the fabrication of a double porous silicon layer by electrochemical anodisation using two different current densities. The low current leads to a low porosity layer and during annealing, the recrystallisation of this layer allows epitaxial growth. The second current leads to a high porosity which permits the transfer on to a low cost substrate. Liquid Phase Epitaxy (LPE) performed with indium (or In+Ga) in the temperature range of 950–1050°C leads to almost homogeneous layers. Growth rate is about 0.35 μm min⁻¹. Crystallinity of the grown epilayer is similar on porous silicon and on single crystal silicon. In this paper, we focus on the realisation of porous silicon sacrificial layer and subsequent LPE growth. This revised version was published online in July 2006 with corrections to the Cover Date.     

Novel Electroless Deposition of Cu<Subscript>3</Subscript>Se<Subscript>2</Subscript> Film on Silicon Substrate by a Simple Galvanic Displacement Process

A novel electroless deposition method for depositing highly uniform adhesive thin films of copper selenide (Cu₃Se₂) on silicon substrates from aqueous solutions is described. The deposition is carried out by two coupled galvanic reactions in a single deposition bath containing copper cations, hydrogen fluoride, and selenous acid: the galvanic deposition of copper on silicon and the subsequent galvanic reaction between the deposited copper with selenous acid in the deposition bath. The powder X-ray diffraction and scanning electron microscopy are used to characterize and examine the deposited films.     

Substitutional carbon defects in silicon: A quantum mechanical characterization through the infrared and Raman spectra

The infrared (IR) and Raman spectra of eight substitutional carbon defects in silicon are computed at the quantum mechanical level by using a periodic supercell approach based on hybrid functionals, an all electron Gaussian type basis set and the CRYSTAL code. The single substitutional C _s case and its combination with a vacancy (C _sV and C _sSiV) are considered first. The progressive saturation of the four bonds of a Si atom with C is then examined. The last set of defects consists of a chain of adjacent carbon atoms C, with i = 1–3. The simple substitutional case, C _s, is the common first member of the three sets. All these defects show important, very characteristic features in their IR spectrum. One or two C related peaks dominate the spectra: at 596 cm⁻¹ for C _s (and C _sSiV, the second neighbor vacancy is not shifting the C _s peak), at 705 and 716 cm⁻¹ for C _sV, at 537 cm⁻¹ for C and C (with additional peaks at 522, 655 and 689 for the latter only), at 607 and 624 cm⁻¹, 601 and 643 cm⁻¹, and 629 cm⁻¹ for SiC, SiC, and SiC, respectively. Comparison with experiment allows to attribute many observed peaks to one of the C substitutional defects. Observed peaks above 720 cm⁻¹ must be attributed to interstitial C or more complicated defects.     

Chloride ion promoted nucleophilic pentafluorophenylation of imines

Nucleophilic addition of the pentafluorophenyl group from (C₆F₅)₃SiF to non-activated imines affording α-C₆F₅-substituted secondary amines in high yield has been described. The reaction proceeds via simultaneous activation of imines and the silane reagent by means of a proton and chloride ion, respectively.     

Strong intramolecular secondary si.N bonds in trifluorosilylhydrazines

The simple silylhydrazines F(3)SiN(Me)NMe(2) (1), F(2)Si(N(Me)NMe(2))(2) (2), and F(3)SiN(SiMe(3))NMe(2) (3) have been prepared by reaction of SiF(4) with LiN(Me)NMe(2) and LiN(SiMe(3))NMe(2), while F(3)SiN(SnMe(3))NMe(2) (4) was prepared from SiF(4) and (Me(3)Sn)(2)NNMe(2) (5). The compounds were characterized by gas-phase IR and multinuclear NMR spectroscopy ((1)H, (13)C, (14/15)N, (19)F, (29)Si, (119)Sn), as well as by mass spectrometry. The crystal structures of compounds 1-5 were determined by X-ray crystallography. The structures of free molecules 1 and 3 were determined by gas-phase electron diffraction. The structures of 1, 2, and 4 were also determined by ab initio calculations at the MP2/6-311+G** level of theory. These structural studies constitute the first experimental proof for the presence of strong Si.N beta-donor-acceptor bonds between the SiF(3) and geminal NMe(2) groups in silylhydrazines. The strength of these non-classical Si.N interactions is strongly dependent on the nature of the substituent at the alpha-nitrogen atom of the SiNN unit, and has the order 3>4>1. The valence angles at these extremely deformed alpha-nitrogen atoms, and the Si.N distances are (crystal/gas): 1 104.2(1)/106.5(4) degrees, 2.438(1)/2.510(6) A; 3 83.6(1)/84.9(4) degrees, 2.102(1)/2.135(9) A; 4 89.6(1) degrees, 2.204(2) A.     

Double Pore Silica Gel Monolith Applied to Liquid Chromatography

Silica gels retaining double pore structure in the size ranges of micrometer and nanometer have been applied to the rod-shaped monolithic column for liquid chromatography. The macropore structure was designed by controlling the phase separation process induced by the hydrolysis and polycondensation of alkoxysilane, whereas the mesopore structure was tailored by the solvent exchange treatments on wet gels. The size exclusion chromatograms on polystyrene standards exhibited almost similar features for octadecyl-modified rod and conventional packed beads columns. The dependence of plate height on the velocity of mobile phase determined for amylbenzene was by far weaker in the rod column than in the packed beads column, suggesting that additional geometrical factors should be considered in describing the separation mechanism in the rod column.     

Reactions of salicylaldehyde with tris(pentaf luorophenyl)silanes and secondary amines

Reactions of tris(pentafluorophenyl)silanes RSi(C₆F₅)₃ with salicylaldehyde and secondary amines were studied. The reactions afforded α-pentafluorophenyl-substituted amines. Silanes RSi(C₆F₅)₃ (R = Me, Ph, C₆F₅, CH₂CH=CH₂, and CH=CH₂) were found to be efficient reagents for transfer of the C₆F₅ group to the iminium cation generated from salicylaldehyde and amine. However, tris(pentafluorophenyl)phenylethynyl-and tris(pentafluorophenyl)silanes were not able to serve as a source of a fluorinated substituent because of competitive transfer of acetylenide fragment or hydride. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 498–503, March, 2006.     

硅表面嫁接有机单分子膜的研究近况

由于在微电子、化学 /生物化学传感器、纳米技术及太阳能等领域具有潜在的应用价值 ,通过 Si— C键在硅表面上直接嫁接有机单分子膜 ,已成为近几年新开展的研究热点 .对这一研究领域进行了概要综述