激光-感应复合熔覆Ni基WC复合层的工艺研究

为了提高熔覆效率与消除熔覆层的裂纹,采用激光-感应复合熔覆的方法在A3表面获得了无气孔与裂纹的Ni基WC复合层。研究了不同的加工参量对复合层质量的影响,结果表明,随着激光比能的增加,粉末面密度增加;在相同的激光比能条件下,随着粉末面密度增加,熔覆层的高度增加,稀释率减小;在相同的粉末面密度条件下,随着激光比能的增加,熔覆层的宽度略有增加。此外,相对于单纯的激光熔覆技术,激光-感应复合熔覆的效率约可以提高5倍。在激光-感应复合熔覆过程中,熔覆层与基材间的温度梯度大大降低,这是Ni基WC复合层无裂纹的关键原因。     

导电聚苯胺线膜修饰ZnO纳米棒阵列的可控制备及其紫外探测性能

基于p-n结的光生伏特效应可构筑性能优异的UV探测器,本文采用水热法可控制备竖直排列的氧化锌纳米棒阵列(n型ZnO-NRs),利用原位聚合法在ZnO-NRs表面上修饰p型聚苯胺线膜(PANI-NWs),再组装成ZnO-NRs与ZnO-NRs/PANI-NWs紫外探测器.通过扫描电镜(SEM)、X射线衍射仪(XRD)、紫...     

基于二分搜索的宽带多普勒模型信号捕获方法

针对深空通信等超高动态低信噪比通信场景中,传统信号捕获方法存在着动态范围不足、精确度不够以及使用窄带多普勒模型导致对接收信号近似精确度不高的问题,提出一种基于二分搜索的接收端采样率调整方法。使用宽带多普勒模型对接收信号进行建模,并使用扫频余弦类信号进行多普勒频偏估计和定时估计,处理多普勒伸缩后的信号与本地信号采样率不匹配的问题。对所提方法进行同步性能仿真,仿真结果表明,所提方法采用正反扫频线性调频(UD-LFM)信号,能在信噪比为-49 dB、最大多普勒频偏为2 MHz的条件下,多普勒频偏估计误差小于400 Hz,定时估计误差不超过60 ns。相比不使用本文所提方法进行直接捕获,本文所提方法具有更高的捕获精确度以及更低的信噪比门限。     

用于太赫兹通信的双向全并行相位估计算法

在太赫兹通信的超宽带应用场景下,太赫兹载波是通过多次倍频实现,因而导致相噪严重恶化。基于太赫兹频率下的多极/零相位噪声模型,在传统的盲相位估计算法的基础上,提出了一种全并行化的相位估计算法。该算法通过在每个并行数据中插入导频,将导频相噪信息作为初始相位对并行数据进行相位扩展及旋转鉴相。借鉴传统盲相位估计算法的最佳相位估计值的判决选择思路,同时利用前一时刻导频和当前时刻导频,对当前并行数据从前后两个方向进行相位估计并对前后两个估计相位基于距离前后导频的位置进行加权求和以获得最佳相位估计信息。经过仿真验证,通过该算法后残余相噪在1 MHz和10 MHz处分别降低10 dBc/Hz和25 dBc/Hz。     

Effect of Different Processing Methods on the Chemical Constituents of Scrophulariae Radix as Revealed by 2D NMR-Based Metabolomics

Scrophulariae Radix (SR) is one of the oldest and most frequently used Chinese herbs for oriental medicine in China. Before clinical use, the SR should be processed using different methods after harvest, such as steaming, “sweating”, and traditional fire-drying. In order to investigate the difference in chemical constituents using different processing methods, the two-dimensional (2D) ¹H-¹³C heteronuclear single quantum correlation (¹H-¹³C HSQC)-based metabolomics approach was applied to extensively characterize the difference in the chemical components in the extracts of SR processed using different processing methods. In total, 20 compounds were identified as potential chemical markers that changed significantly with different steaming durations. Seven compounds can be used as potential chemical markers to differentiate processing by sweating, hot-air drying, and steaming for 4 h. These findings could elucidate the change of chemical constituents of the processed SR and provide a guide for the processing. In addition, our protocol may represent a general approach to characterizing chemical compounds of traditional Chinese medicine (TCM) and therefore might be considered as a promising approach to exploring the scientific basis of traditional processing of TCM.     

Water Status and Predictive Models of Moisture Content during Drying of Soybean Dregs Based on LF-NMR

To explore the drying characteristics of soybean dregs and a nondestructive moisture content test method, in this study, soybean dregs were dried with hot air (80 °C), the moisture content was measured using the drying method, water status was analyzed using low-field nuclear magnetic resonance (LF-NMR) and the moisture content prediction models were built and validated. The results revealed that the moisture contents of the soybean dregs were 0.57 and 0.01 g/g(w.b.), respectively, after drying for 5 and 7 h. The effective moisture diffusivity increased with the decrease in moisture content; it ranged from 5.27 × 10⁻⁹ to 6.96 × 10⁻⁸ m²·s⁻¹. Soybean dregs contained bound water (T₂₁), immobilized water (T₂₂) and free water (T₂₃ and T₂₃’). With the proceeding of drying, all of the relaxation peaks shifted left until a new peak (T₂₃’) appeared; then, the structure of soybean dregs changed, and the relaxation peaks reformed, and the peak shifted left again. The peak area may predict the moisture content of soybean dregs, and the gray values of images predict the moisture contents mainly composed of free water or immobilized water. The results may provide a reference for drying of soybean dregs and a new moisture detection method.     

关于电信企业决策支持系统的建设意见

阐述了当前电信企业各项计算机管理系统的现状 ,指出存在的不足 ,提出开发建设新的电信决策支持系统的意义 ;介绍电信决策支持系统的体系结构和所涉及的新技术、新概念 ,并指出了电信决策支持系统建设的难点 ,较详细地介绍了电信决策支持系统所实现的主要功能。     

汽渡船数据采集与监控系统应用研究

渡船相关数据的采集是故障诊断和监控系统设计的关键之一,这些数据具有复杂性和多样性,利用普通的AD转换器对信号进行采集其准确性不高,通道数也受到限制。基于以太网的数据采集系统可以解决多通道和高精度问题。系统硬件采用双路监测报警系统,互为补充,采用网络型结构,并选取具有以太网接口的ADAM-5000/TCP数据采集模块,避免了设备接口的转化问题,使系统架构变得简单、快速。软件系统完成了参数显示、报警输出、故障诊断、曲线绘制、参数设置等功能。经实船运行,系统具有性能稳定、可靠性高、易于实现和操作等特点,达到机舱自动化的设计要求。     

牙髓微弱荧光信号检测与采集研究

为了检测牙髓活力状况,将激光诱导荧光技术应用于牙髓活力检测中,基于牙髓荧光反射光纤输出微弱信号基础上,利用光电倍增管作为荧光信号检测的探测器,设计与分析微弱荧光信号的检测电路;利用单片机与12位A／D转换器为数据采集核心,设计单片机采集荧光信号的电路,并通过单片机通讯接口,结合计算机数据采集系统,完成牙髓荧光数据处理与显示。