Investigation of Copper(II) Interference on the Anodic Stripping Voltammetry of Lead(II) and Cadmium(II) at Bismuth Film Electrode

The bismuth‐coated electrode is known to be prone to errors caused by copper(II). This study investigates copper(II) interference at bismuth film electrode for the detection of lead(II) and cadmium(II). It was conducted using glassy carbon electrode, while the bismuth film was plated in situ simultaneously with the target metal ions at ? 1200 mV. Copper(II) presented in solution significantly reduced the sensitivity of the electrode, for example there was an approximately 70 % and 90 % decrease in peak signals for lead(II) and cadmium(II), respectively, at a 10‐fold molar excess of copper(II). The decrease in sensitivity was ascribed to the competition between copper and bismuth or the metal ions for surface active sites. Scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) analysis suggested a large decrease in the amount of bismuth nanoparticles formed on the electrode surface in the presence of copper(II) occurred, validating the competition between copper and bismuth ions for surface active sites. Recovery of the stripping signal of lead(II) and cadmium(II) was obtained by adding ferrocyanide ion to the solution. Finally, the proposed method was successfully applied to determine lead(II) and cadmium(II) in water samples and the method was validated by ICP‐MS technique.     

In–out asymmetry and interference effects in plasmon excitation by swift charged particles traversing a surface

We investigate the excitation of plasmons by a fast charged particle moving in the vicinity or traversing the surface of a solid along an arbitrary trajectory. We use both quantum‐mechanical and semiclassical dielectric formulations to study how the particle couples with the bulk and surface excitations. We pay special attention to the differences and similarities between incoming and outgoing trajectories, finding some novel oscillatory structures that can be ascribed to an interference effect between direct and reflected plasmon excitations. Copyright © 2013 John Wiley & Sons, Ltd.     

Distributed power control for multiuser cognitive radio networks with quality of service and interference temperature constraints

One of the most challenging problems in dynamic resource allocation for cognitive radio networks is to adjust transmission power of secondary users (SUs) while quality of service needs of both SUs and primary users (PUs) are guaranteed. Most power control algorithms only consider interference temperature constraint in single user scenario while ignoring the interference from PUs to SUs and minimum signal to interference plus noise ratio (SINR) requirement of SUs. In this paper, a distributed power control algorithm without user cooperation is proposed for multiuser underlay CNRs. Specifically, we focus on maximizing total throughput of SUs subject to both maximum allowable transmission power constraint and SINR constraint, as well as interference temperature constraint. To reduce the burden of information exchange and computational complexity, an average interference constraint is proposed. Parameter range and convergence analysis are given for feasible solutions. The resource allocation is transformed into a convex optimization problem, which is solved by using Lagrange dual method. In computer simulations, the effectiveness of our proposed scheme is shown by comparing with distributed constrained power control algorithm and Nash bargaining power control game algorithm. Copyright © 2014 John Wiley & Sons, Ltd.     

Opportunistic interference management: a new approach for multiantenna downlink cellular networks

A new approach for multiantenna broadcast channels in cellular networks based on multiuser diversity concept is introduced. The technique called opportunistic interference management achieves dirty paper coding capacity asymptotically with minimum feedback required. When there are K antennas at the base station with M mobile users in the cell, the proposed technique only requires K integer numbers related to channel state information between mobile users and base station. The encoding and decoding complexity of this scheme is the same as that of point‐to‐point communications, which makes the implementation of this technique easy. An antenna selection scheme is proposed at the base station to reduce the minimum required mobile users significantly at the expense of reasonable increase in feedback. In order to guarantee fairness, a new algorithm is presented that incorporates opportunistic interference management into existing Global System for Mobile communications (GSM) standard. Copyright © 2014 John Wiley & Sons, Ltd.     

Outage performance of dual‐hop relaying systems over extended generalized‐K fading channels

The outage performance of the amplify‐and‐forward relaying strategies over mutually uncorrelated extended generalized‐K fading channels is addressed in this paper. The attention is dedicated to the analyses of the noise‐limited and also interference‐limited environment. The new analytical expression for outage probability of observed relaying system in the presence of thermal noise is derived using the method for approximating equivalent signal‐to‐noise ratio. In addition, the outage performance is studied for the dual‐hop system when only the single dominant co‐channel interference is inherent at the relay and destination node. The correctness of the proposed mathematical derivations is verified by simulations. Copyright © 2014 John Wiley & Sons, Ltd.     

Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

In order to reduce the pollutants of environment and electromagnetic waves, environment friendly polymer foams with outstanding electromagnetic interference shielding are imminently required. In this paper, a kind of electromagnetic shielding, biodegradable nanocomposite foam was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO₂. The crystallization temperature and melting temperature of PBS/CNTs nanocomposites with 4 wt % of CNTs increased remarkably by 6 °C and 3.1 °C compared with that of pure PBS and a double crystal melting peak of various PBS samples appeared in DSC curves. Increasing the CNT content from 0 to 4 wt % leads to an increase of approximately 3 orders of magnitude in storage modulus and nearly 9 orders of magnitude in enhancement of electrical properties. Furthermore, CNTs endowed PBS nanocomposite foam with adjustable electromagnetic interference (EMI) shielding property, giving a specific EMI shielding effectiveness of 28.5 dB cm³/g. This study provides a promising methodology for preparing biodegradable, lightweight PBS/CNTs foam with outstanding electromagnetic shielding properties.     

Adaptive neuro-fuzzy interference system modelling for chlorpyrifos removal with walnut shell biochar

Accumulation of chlorpyrifos (CP), a pesticide, causes a significant environmental problem in food, surface/ground waters further to human health. The removal of the CP pollutant in surface/wastewater could be achieved by biochar due to the improved physical and chemical properties. In this work, the CP removal capacities of biochar samples derived from walnut shells at various temperatures from 450 to 900 °C were investigated. The experiments were performed as laboratory batch type study and the adsorption efficiency was determined at various conditions such as adsorbent dosage (10–500 mg/L), sorbate concentrations (100–1500 µg/L), contact time (0–300 min), initial pH (3–10), and the number of recycle.By subtracting the pyrolysis temperature from 450 °C to 900 °C, the surface areas were found to increase from 12.9 m²/g to 353.3 m²/g, respectively.The 143 experimental data were evaluated by a pair of kinetics and isotherm models and the Adaptive Neural Fuzzy Inference System (ANFIS). The developed ANFIS model was 98.56% successful in predicting the CP removal efficiency depending on the adsorption conditions. Walnut Shell Biochar (WSBC) can be applied for CP adsorption with 86.64% removal efficiency under optimum adsorption conditions (adsorbent = 250 µg/L, sorbate = 1000 µg/L, pH = 7.07 and contact time 15 min) thanks to its improved porosity. It was determined that the biochar samples could be reused 5 times. Equilibrium adsorption was observed to conform to the Langmuir isotherm, and the maximum adsorption capacity for WSBC@900 was 3.536 mg/g.     

Cooperative spectrum sharing MIMO systems with successive decoding

A spectrum sharing system with primary and secondary nodes, each equipped with an arbitrary number of antennas, is investigated. Particularly, the outage performance of an underlay cognitive system is analytically studied, in the case when the end-to-end ($e2e$) communication is established via an intermediate relay node. To better enhance the $e2e$ communication, successive interference cancellation (SIC) is adopted, which compensates for both the transmission power constraint and the presence of interference from primary nodes. Both the relay and secondary receiver perform unordered SIC to successively decode the multiple streams, whereas the decode-and-forward relaying protocol is used for the $e2e$ communication. New closed-form expressions for the $e2e$ outage performance of each transmitted stream are derived in terms of finite sum series of the Tricomi confluent hypergeometric function. In addition, simplified yet tight approximations for the asymptotic outage performance are obtained. Useful engineering insights are manifested, such as the diversity order of the considered system and the impact of interference from the primary nodes in conjunction with the constrained transmission power of the secondary nodes.     

用Matlab比较双缝干涉和双缝衍射

运用Matlab软件,对双缝衍射和双缝干涉、单缝衍射的光强分布和谱线特征进行了数值模拟,绘出实验中难以观察到的光强分布图,比较出双缝衍射与双缝干涉及单缝衍射的联系与区别。