Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. II. Self-organization of cationic polymer particles on polymer films and wettability control with particle monolayers

Self-organization of cationic polymer particles through hydrophobic interaction on polymer films in aqueous system and characteristic properties of the resulting particle monolayers were investigated. Cationic polymer particles bearing quaternary ammonium groups on their surfaces effectively self-organized on polymer films. With an increase of the particle surface charge density, the surface coverage and average aggregate size (N _a) decreased. The surface coverage control was accomplished by tuning the ionic strength of the media. The wettability of polymer films for water was imparted by the formation of particle monolayers on them. Annealing of the particle monolayers resulted in the increase of the adhesive strength, while the wettability for water was lost. Further improvements of both wettability and adhesive strength of particle monolayers were achieved by the immobilization of silica colloids on the particle monolayers. This method would be effective for the hydrophilization of polymer films.     

Formation and recovery of a cell sheet by a particle monolayer with the surface roughness

We studied the topographical effect of roughness displayed by a closely packed particle monolayer on formation of a cell monolayer (cell sheet). Particle monolayers were prepared by Langmuir-Blodgett deposition using particles, which were 527nm (SA053) and 1270nm (SA127) in diameter. Human umbilical vein endothelial cells (HUVECs) were seeded at a high density (2.0 x10(5)cells/cm(2)) onto particle monolayers. It was found that cells gradually became into contact with adjacent cells on the SA053 monolayer and the formed cell sheet could be readily detached from the particle monolayer by gentle pipetting. On the other hand, cells adhering onto the tissue culture polystyrene (TCPS) and the SA127 particle monolayer were difficult to peel off. At a low cell seeding density (5.0x10(4)cells/cm(2)), pre-coating with bovine plasma fibronectin (FN) allowed cell growth on an SA053 particle monolayer, and a confluent monolayer was able to be peeled as a cell sheet from the particle monolayer just by pipetting. By immunostaining of human fibronectin, we found that fibronectin was secreted and concentrated onto the substrate side of a cell sheet. The obtained cell sheet adhered and grew on the TCPS again within 20min.     

基于磁圆二向色谱的单层MoS_2激子能量和线宽温度依赖特性

以二硫化钼(MoS_2)为代表的过渡金属硫属化物属于二维层状材料,样品可以薄至单层.单层MoS_2是一种直接带隙半导体,在纳米逻辑器件、高速光电探测、纳米激光等领域具有广阔的应用前景.在实际应用中,温度是影响半导体材料能带结构和性质的主要因素之一.因此研究单层二维材料能带的温度依赖特性对理解其物理机理以及开展器件应用具有重要的意义.目前,在广泛采用的测量单层MoS_2反射谱的研究中,激子峰往往叠加在一个很强的光谱背底上,难以准确分辨激子的峰位和线宽.基于自行搭建的显微磁圆二向色谱系统,研究了单层MoS_2在65—300 K温度范围内的反射谱和磁圆二向色谱,结果表明磁圆二向色谱在研究单层材料激子能量和线宽方面具有明显的优势.通过分析变温的磁圆二向色谱,得到了不同温度下的A,B激子的跃迁能量和线宽.通过对激子能量和线宽的温度依赖关系进行拟合,进一步讨论了声子散射对激子线宽的影响.     

Cu(001)表面CO吸附单层结构和电子态的第一性原理研究

用密度泛函理论(DFT)研究了Cu(001)表面CO吸附单层的表面性质. 总能计算结果表明, 顶位结构总能最低, 相应位置的CO分子吸附能最大. 谷位吸附结构的衬底原子层间距相对于清洁表面的膨胀量约为10%, 从而导致了谷位吸附的不稳定性. 在顶位、桥位和谷位三个吸附结构中, C和Cu原子之间的距离dC-Cu分别为0.1868、0.1975和0.2231 nm, 对应的CO分子键长为0.1154、0.1165 和0.1175 nm. 计算了CO分子的态密度(DOS). 结果表明, 衬底与分子的作用主要是分子和金属轨道的杂化. 在吸附过程中, 电荷主要从碳原子的s轨道向p轨道转移. 在顶位、桥位和谷位吸附结构中, 每个碳原子内电荷的转移量分别为0.45e、0.54e 和0.55e. 衬底向吸附分子的电荷转移量不大, CO 吸附分子层为一绝缘层.     

巯基卟啉自组装膜的制备及应用研究进展

详细介绍了巯基卟啉自组装膜的几种制备方法,评述了不同制备方法的优缺点;对卟啉自组装膜在电荷转移、分子氧电催化、分子光电器件等领域的研究进展进行了评述,引用文献54篇。     

Simultaneous detection of cadmium, copper, and lead using a carbon paste electrode modified with carbamoylphosphonic acid self-assembled monolayer on mesoporous silica (SAMMS)

A new sensor was developed for simultaneous detection of cadmium (Cd²⁺), copper (Cu²⁺), and lead (Pb²⁺), based on the voltammetric response at a carbon paste electrode modified with carbamoylphosphonic acid (acetamide phosphonic acid) self-assembled monolayer (SAM) on mesoporous silica (Ac-Phos SAMMS). The adsorptive stripping voltammetry (AdSV) technique involves preconcentration of the metal ions onto Ac-Phos SAMMS under an open circuit, then electrolysis of the preconcentrated species, followed by a square wave potential sweep towards positive values. Factors affecting the preconcentration process were investigated. The voltammetric responses increased linearly with the preconcentration time from 1 to 30 min or with metal ion concentrations ranging from 10 to 200 ppb. The responses also evolved in the same fashion as adsorption isotherm in the pH range of 2-6. The metal detection limits were 10 ppb after 2 min preconcentration and improved to 0.5 ppb after 20 min preconcentration.     

A piezoelectric immunosensor for the determination of pesticide residues and metabolites in fruit juices

A quartz crystal microbalance (QCM) immunosensor was developed for the determination of the insecticide carbaryl and 3,5,6-trichloro-2-pyridinol (TCP), the main metabolite of the insecticide chlorpyrifos and of the herbicide triclopyr. The detection was based on a competitive conjugate-immobilized immunoassay format using monoclonal antibodies (MAbs). Hapten conjugates were covalently immobilized, via thioctic acid self-assembled monolayer (SAM), onto the gold electrode sensitive surface of the quartz crystal. This covalent immobilization allowed the reusability of the modified electrode surface for at least one hundred and fifty assays without significant loss of sensitivity. The piezoimmunosensor showed detection limits (analyte concentrations producing 10% inhibition of the maximum signal) of 11 and 7 μg l⁻¹ for carbaryl and TCP, respectively. The sensitivity attained (I₅₀ value) was around 30 μg l⁻¹ for both compounds. Linear working ranges were 15-53 μg l⁻¹ for carbaryl and 13-83 μg l⁻¹ for TCP. Each complete assay cycle took 20 min. The good sensitivity, specificity, and reusability achieved, together with the short response time, allowed the application of this immunosensor to the determination of carbaryl and TCP in fruits and vegetables at European regulatory levels, with high precision and accuracy.     

Hydrophobicity-induced drying transition in alkanethiol self-assembled monolayer—water interface

During the course of our investigation of the electron transfer properties of some redox species through highly hydrophobic long chain alkanethiol molecules on gold in aqueous and non-aqueous solvents, we obtained some intriguing results such as unusually low interfacial capacitance, very high values of impedance and film resistance, all of which pointed to the possible existence of a nanometer size interfacial gap between the hydrophobic monolayer and aqueous electrolyte. We explain this phenomenon by a model for the alkanethiol monolayer—aqueous electrolyte interface, in which the extremely hydrophobic alkanethiol film repels water molecules adjacent to it and in the process creates a shield between the monolayer film and water. This effectively increases the overall thickness of the dielectric layer that is manifested as an abnormally low value of interfacial capacitance. This behaviour is very much akin to the ‘drying transition’ proposed by Lum, Chandler and Weeks in their theory of length scale dependent hydrophobicity. For small hydrophobic units consisting of apolar solutes, the water molecules can reorganize around them without sacrificing their hydrogen bonds. Since for an extended hydrophobic unit, the existence of hydrogen bonded water structure close to it is geometrically unfavourable, there is a net depletion of water molecules in the vicinity leading to the possible creation of a hydrophobic interfacial gap.     

Formation of double helix self-assembled monolayers of ethynylhelicene oligomer disulfides on gold surfaces

Optically active ethynylhelicene pentamers and hexamers linked by disulfide bonds were synthesized. They formed self-assembled monolayers (SAMs) with double helix structure on gold surfaces, which were analyzed by infrared reflection-absorption spectroscopy (IR-RAS), quartz crystal microbalance (QCM), surface plasmon resonance (SPR), and circular dichroism (CD). Double helix SAMs could be formed on gold surfaces either from double helices or random coils in solution. The double helices on the surface were more stable than in solution. This result suggested the presence of strong intercomplex interactions between double helix complexes on the surface.     

表面引发聚合反应研究进展

表面引发聚合反应作为一种新的聚合反应可广泛应用于固体基底的表面修饰与改性。结合分子自组装技术,几乎各种类型的聚合反应都有可能在固体基底表面进行。本文对表面引发聚合反应的研究进展进行了综述,对反应类型、实验方法、研究动向以及在合成聚合物刷、形成图案化聚合物薄膜等方面的应用与发展前景作了介绍与讨论。