还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

Rational synthesis of covalently bonded organic-inorganic hybrids

Hybrid materials based on covalently linked inorganic polyoxometalates (POMs) and organic species containing a delocalized pi system have drawn increasing attention. These hybrids, traditionally prepared by cluster assembly approaches that lack predictability and controllability, can now be synthesized through common organic reactions by using organically functionalized POM clusters as building blocks. This minireview highlights some of the most recent advances on a particular type of hybrids where the organic and inorganic components are connected by an imido linkage.     

Robust core-shell supramolecular assemblies based on cationic vesicles and ring-shaped [Mo154] polyoxomolybdate nanoclusters: template-directed synthesis and characterizations

Substantial progress has been made recently in extending the supramolecular assembly of biomimetic structures to vesicle-based sophisticated nanocomposites and mesostructures. We report herein the successful preparation of unilamellar surfactant vesicles coated with a monolayer of ring-shaped [Mo(154)] polyoxometalate (POM) nanoclusters, (NH(4))(28)[Mo(154)(NO)(14)O(448)H(14)(H(2)O)(70)]. approximately 350 H(2)O, by coulomb attractions using preformed didodecyldimethylammonium bromide (DDAB) surfactant vesicles as templates. The resultant vesicle-templated supramolecular assemblies are robust (they do not disintegrate upon dehydration) both at room-temperature ambient and vacuum conditions, as characterized by conventional transmission electron microscopy (TEM) and atomic force microscopy (AFM). The flexibility of the complex soft assemblies was also revealed by AFM measurements. The effect of POM-vesicle coulomb attractions on the dimensions of the templating vesicles was also investigated by using dynamic light scattering (DLS). Although origins of the structure stability of the as-prepared supramolecular assemblies are not clear yet, the nanometer scale cavities and the related properties of macroions of the POM clusters may play an important role in it.     

罗丹明B-Mo(V)-SCN~--PVA体系荧光熄灭法测痕量钼

在聚乙烯醇存在下,用罗丹明B-Mo(V)-SCN~-荧光熄灭法测Mo,能消除过量的SCN-对罗丹明B的熄灭作用。加入聚乙烯醇后体系的荧光熄灭倍数比未加入时大14倍。此法灵敏度高、稳定性好、操作简便,检测下限0.12ng/ml Mo.可用于测水和头发中的钼。     

二氧化碳与丙烯直接合成甲基丙烯酸用CuPMo／TiO2催化剂的研究

 用溶胶－凝胶法以磷钼酸（MPA）的铜盐溶液水解钛酸四丁酯制备了CuPMo／TiO2催化剂，并用ICP，XRD，TG－DTA，IR，TPD－MS和微反技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化性能．结果表明：杂多钼酸盐与TiO2表面通过O2－桥发生键联．在623K下，杂多阴离子仍保持其原有的Keggin结构；CO2在Lewis酸位Cu（Ⅱ）和Lewis碱位Cu－O－Mo桥氧的协同作用下形成卧式吸附态Cu（Ⅱ）←O－（CO）←（O－－Cu）；丙烯以分子吸附态在催化剂上吸附；在空速1500h－1，压力1MPa和温度563K的反应条件下，丙烯的转化率为4．2％，甲基丙烯酸的选择性为96％．     

衬钽管石墨炉中小量氢气的影响及稀土基质激光晶体中铕的测定

通过纯氩中加入小量氢气,研究了保护气体对衬鉏管石墨炉分析性能的影响,结果表明,采用5％H_2-Ar作保护气体,可以显著提离衬鉏管的成品率,明显延长衬鉏管的使用寿命,使衬钽管的测定重现性得到改善,而对测定灵敏度没有明显影响。干扰试验表明,本方法可直接用于稀土基质激光晶体中铕的测定,分析结果与计算值基本一致。     

Studies of a new series of ion-pair complexes [Mo(dtc)_4][Ln(dtc)_4] (Ln=La-Er,exp.Pm)

A new series of ion-pair complexes [Mo(dtc)4][Ln(dtc)4] (Ln=La-Er, exp. Pm) were synthesized from MoCl5, LnCl3 and Nadtc in anhydrous methanol. The crystal structures of the four complexes, [Mo(dtc)4][Ln(dtc)4] (Ln=Nd, Sm, Ho and Er) have been determined by X-ray diffraction. Spectroscopic properties of all these complexes are also discussed here.     

磷钨钼钒杂多蓝光度法测定钼的探索

本文研究了磷钨钼钒四元杂多酸及其还原产物杂多蓝的形成条件、光度性质、组成和在测定高速钢中高钼的应用。试验表明,磷钨钼钒杂多蓝光度法测定钼具有新颖性、高选择性、较高准确性和简便性,适于高速钢中>1％Mo的测定。     

钇钼钨硅杂多配合物的合成稀土多元渗及导电性

用降解法合成了未见报道的标题配合物.通过化学分析、ICP和TG曲线确定了其化学式为K10H3[Y(SiW9Mo2O39)2];利用IR、XRD、183W-NMR、循环伏安等手段对其结构进行了表征.结果表明,杂多阴离子为α-型Keggin结构.采用稀土多元渗的方法对配合物进行了气相热扩渗,ICP和XPS测试表明,微量的稀土元素La,Sm和Dy可以渗入到配合物的体相,并与组分元素发生键合作用;导电性的测试结果表明,室温扩渗后,试样的电导率提高了约104倍,有望成为具有实际应用的固体电解质.     

Hydrothermal synthesis of potassium molybdenum oxide bronzes: structure-inheriting solid-state route to blue bronze and dissolution/deposition route to red bronze

The hydrothermal syntheses of the alkali metal molybdenum bronzes from starting solids (H_xMoO₃) with structural affinities to the desired products were investigated. Single-phase potassium blue and red bronzes were prepared by the hydrothermal treatments at around 430 K, and characterized by powder X-ray diffraction, IR spectroscopy, and SEM. The formation processes of these two bronzes during the hydrothermal treatments were found to differ. The blue bronze was formed by a structure-inheriting solid-state route from H_xMoO₃ with x<0.3, whereas the red bronze was formed for x>0.3 through a solution dissolution/deposition route via the formation of MoO₃+MoO₂.