2,2''''-联吡啶和亚铁氰化钾对乙醛酸化学镀铜的影响

以乙醛酸作还原剂、Na2EDTA为络合剂、2,2'-联吡啶和亚铁氰化钾作为添加剂组成化学镀铜体系,研究了两种添加剂对化学镀铜速率、镀层表面形貌、组成和结构的影响.结果表明:添加适量的2,2'-联吡啶和亚铁氰化钾,不仅提高了镀液的稳定性,而且使沉积速率增加1倍.这两种添加剂的同时使用,使镀层颜色变亮,形貌发生变化.所得镀层是多晶铜,没有发现夹杂Cu20.     

Chemical Liquid Phase Deposition of Thin Aluminum Oxide Films

Introduction Inorganic oxide films have attracted a lot of interest in the last several decades. Among them, silicon dioxide films are widely used in modern microelectronics, optics and mechanics. This material has been grown by various methods including thermal oxidation, chemical vapor phase deposition, plasma-enhanced chemical vapor phase deposition, and so on.1,2 Recently, Nagayama et al.3 have reported that SiO2 thin films could be produced by a new chemical method of liquid phase depos…     

Fabrication of high performance thin films from metal fluorocomplex aqueous solution by the liquid phase deposition

The hetro-structured oxide thin films from metal fluorocomplex solution have been prepared by the liquid phase deposition (LPD) method. The Pt/Nb₂O₅ and Au/Nb₂O₅ composite films can be prepared from a mixed solution of niobium source, H₃BO₃, Pt(NH₃)₄Cl₂ and HAuCl₄ aqueous solutions under the ambient temperature and atmosphere. In the case of Au/SiO₂ composite film, (NH₄)₂SiF₆ solution is used as a mother solution. The Pt and Au ionic species are deposited in Nb₂O₅ and SiO₂ matrices. They are reduced to their metallic state after treatment above 200 °C. The size of dispersed particles can be controlled by heat treatment temperature. It is also clear that, gold nanoparticles are also found to interact with SiO₂, although the interaction is smaller than that with Nb₂O₅ showing the size of Au nanoparticles remain smaller in Nb₂O₅ that in SiO₂.     

Preparation of Polycrystalline Antimonic Acid Films by Electrophoretic Deposition

Cubic antimonic acid (Sb₂O₅·nH₂O) films were successfully prepared on stainless steel and Si(100) substrates by electrophoretic deposition (EPD) using two types of sols. The sols were prepared by reacting an H₂O₂ aqueous solution with Sb(O-i-C₃H₇)₃ or metallic Sb powder. The resulting films were found to consist of fine particles of cubic Sb₂O₅·nH₂O single crystals with uniform particle sizes of 30 nm and 150 nm. The weight of the Sb₂O₅·nH₂O deposit on the anode Si(100) substrate by EPD increased linearly with the current density in the range of 0–0.67 mA cm^–2, when the sol pH was over 7. The proton conductivity of the polycrystalline Sb₂O₅·nH₂O discs, formed from the two types of sols, was evaluated by an ac impedance method at room temperature under controlled levels of relative humidity.     

玻璃基片上纳米碳管电极的集成

利用微波等离子体化学气相沉积法在玻璃孔穴中定位生长纳米碳管电极, 分析了负偏压对纳米碳管电极生长的影响. 该电极对铜离子的电化学检测性能分析结果表明, 所制备的纳米碳管电极具有良好的电化学检测性能, 位于－0.0100 V附近的铜离子的还原峰峰形良好, 其电流在铜离子浓度为0.01~0.30 mmol•L^-1时, 与Cu²⁺浓度呈良好的线性关系, 相关系数为0.9975, 且具有较好的长期稳定性和重现性.     

2-羟丙基三甲基氯化铵壳聚糖的制备及其性能研究

以脱乙酰度为95.37%的壳聚糖(CTS)为原料,异丙醇为溶剂,2,3-环氧丙基三甲基氯化铵为改性剂,于80℃反应12 h合成了水溶性季铵盐2-羟丙基三甲基氯化铵壳聚糖(HACC)。HACC的吸水保水性是CTS的2倍～3倍,加入化妆品中培养2周后菌落总数少于100 CFU.g-1。     

Deposition of complex multielemental thin films

Modern condensed-matter physics is increasingly concerned with the design, synthesis, analysis, and exploitation of chemically complex materials and structures. Complex metal oxides and strongly correlated electron systems such as YBa₂Cu₃O_7−x and La_1−xSr_xMnO₃ are paradigmatic examples. Their production in the form of high-quality thin films is of both technological and fundamental importance and has stimulated a concerted effort in the last two decades to find and optimize efficient techniques to this end. This review discusses the physics behind and the requirements for synthesizing high-quality films of such materials and examines fundamental aspects of the growth processes associated with magnetron sputtering and pulsed laser deposition, the two techniques which presently offer the best solutions in this burgeoning field.     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.