光电双向负阻晶体管的研制及特性分析

首次对双向负阻晶体管(BNRT)进行了光敏化,设计并研制出既有光敏特性又有“S”型负阻特性的一种新型光电开关器件——光电双向负阻晶体管(PBNRT)。介绍了器件的设计和研制过程;测量分析了其J—V特性与光强和栅极电压的关系;测量了光电开关的时间常数并进行了分析讨论。     

交错并联Buck中耦合电感的设计

针对开关电源系统对功率密度等级不断提高的要求,为进一步发挥交错并联技术的优势,本文以减小输出电流纹波和改善动态特性为目标,对大占空比条件下交错并联Buck电路中的耦合电感进行了详细分析和计算。通过软件仿真验证,得出了耦合系数和占空比对电路性能的具体影响,耦合系数的取值应尽量接近-1,从而为耦合电感的设计提供了理论依据。     

OBS边缘节点接收设备的研究

光突发交换(OBS)网络边缘节点的接收设备具有与普通光网络接收设备不同的要求和特点.首先,光突发接收要求有快速的信号同步时间,以减少前导字节所占用的开销;其次,特有的帧结构要求有相应的解封装操作和业务数据的快速交换能力.本文设计和测试了光突发接收电路,同时利用大容量FPGA完成了信号的解封装和IP数据的快速交换,并以此开发了OBS边缘节点接收设备,在系统测试中证明该设备符合光突发交换系统的要求.     

长波长垂直腔面发射激光器开关及双稳特性

为了研究垂直腔面发射激光器偏振转换特性,基于自旋反转模型,数值研究了正交光注入下1550nm垂直腔面发射激光器频率诱导偏振开关及双稳特性。结果表明,在正交光注入下,连续改变注入光与激光器光场内x线性极化模的频率失谐可诱导产生两类偏振开关和偏振双稳现象,且注入光强与偏振电流的变化都显著影响双稳宽度和激光器的输出特性;合理选择操作条件,可实现对1550nm垂直腔面发射激光器频率诱导偏振开关及双稳的控制。这一结果对垂直腔面发射激光器在全光开关和全光存储等领域的应用具有参考价值。     

Burst scheduling for differentiated services in optical burst switching WDM networks

Optical burst switching (OBS) is one of the most important switching technologies for future optical wavelength division multiplexing (WDM) networks and the Internet. The model of differentiated services has been proposed to support quality of service (QoS) in the IP‐based Internet. It is also very important to have differentiated service support in OBS networks. When the burst scheduling in an OBS network is set up appropriately, network can support differentiated services. In this paper, we proposed a new burst scheduling scheme, called differentiated scheduling with identical priority offset time (DSIPO). In DSIPO, the same priority offset time is used for all the bursts destined to the same edge node regardless of their priorities. Differentiated services in terms of burst loss probability are achieved by processing the control packets of higher priority class bursts, thus reserving resources for their data bursts, more promptly upon their arrival than those of lower priority class bursts. Each intermediate (core) node can adjust the burst loss probabilities of various burst classes by choosing its own differentiated processing delay value for each priority class or its own differentiated processing delay difference value between any pair of adjacent priority classes. We model and analyse DSIPO in terms of the burst loss probability for each priority class with simulation validation. The performance of DISPO is evaluated by simulation. Copyright © 2004 John Wiley & Sons, Ltd.     

一种用于逐次逼近ADC的高能效高线性度开关电容时序

提出了一种用于逐次逼近模数转换器的高能效高线性度开关电容时序。相较于典型的基于V_CM的开关原理,该开关时序可减少37%的开关能量,并具有更高的线性度。该开关时序已应用于1V,10位300kS/s的SAR ADC,并在0.18μm标准CMOS工艺下成功流片。测试结果表明,在1V电源电压下,此SAR ADC的SNDR为55.48dB,SFDR为66.98dB,功耗为2.13μW,品质因数到达14.66fJ/c-s。DNL和INL分别为0.52/-0.47 LSB和0.72/-0.79 LSB,并且与静态非线性模型一致,最大INL出现在 V_FS/4处和3V_FS/4处。     

高速局域网技术的发展

对近年来出现的几种高速局域网技术，如快速以太网、千兆以太网、交换式以太网等作了详细的介绍。     

Design and analysis of a high efficiency linear power amplifier

A high efficiency linear power amplifier is introduced based on the idea of Switch-Linear Hybrid (SLH) power conversion. The SLH power amplifier developed from the conventional class B power amplifier, while the class B configuration power unit in the SLH power amplifier is fed by a dynamic switching power supply, not the usual constant DC power supply. Thus, the efficiency of the class B configuration power unit in SLH power amplifier can be greatly improved. By combining linear power amplifier with switching power supply, the SLH power amplifier has synthetic performance of high fidelity, high efficiency and excellent dynamic characteristics. In this article, analysis of SLH power amplifier is performed, especially focusing on its linear power unit which is the core of SLH power amplifier. Design considerations are also presented parallel with the analysis. Both the theoretical analysis and experimental results verify the validity of SLH power amplifier.     

新型大功率开关器件IEGT及其特性

介绍了一种新型大功率开关器件IEGT的结构,原理,通态特性,开关特性,开关效率以及有关工艺特点。