Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

Electrical Impedance Spectroscopic Study of CNT/Ethylene-alt-CO/Propylene-alt-CO Polyketones Nanocomposite

Impedance spectroscopy was utilized to investigate the dielectric properties, ac conductivity and charge transport mechanisms in propylene-alt-CO/ethylene-alt-CO (EPEC) random terpolymer filled with multi-walled carbon nanotubes (MWCNT) as a function of nanofiller content, frequency, and temperature. Equivalent resistor-capacitor (RC) circuit models were proposed to describe the impedance characteristics of the unfilled terpolymer and the nanocomposite at different temperatures. For the nanocomposites, the ac conductivity tended to be frequency independent at low frequencies. At high frequencies, the ac conductivity increased with frequency. The dc conductivity (i.e., plateau of the ac conductivity at low frequencies) at room temperature increased from 10^?9 (Ω·m)^?1 for the unfilled polymer to l0^?3 (Ω·m)^?1 for the 6 wt% MWCNT/EPEC nanocomposite. At low temperatures, the equivalent RC model for EPEC-0 and EPEC-2 was found to consist of a parallel RC circuit. However, for 6 wt% MWCNT/EPEC nanocomposite, an RC model consisting of an R/constant phase element (CPE) circuit and a resistor in series was required to describe the impedance behavior of the nanocomposite.     

The Role of Column Switching in Analysing Complex Samplest

Abstract

Our objective in using column switching is primarily to achieve the desired separation in the minimum analysis time. Complimentary to this aim is the need for sample and column cleanup followed by column re-equilibration. Finally, all operations should be capable of automation. Fundamental to column switching methodology is the concept of Zone cutting, where part of the chromatogram is transferred to another column. This forms the basis of sample cleanup and is a very versatile and powerful method. Multiple zone cutting is also possible to further increase the scope of cleanup or to minimise analysis time. Zone cutting is also complimentary to the techniques of trace enrichment and recycling. Examples will be given involving the use of these techniques in the analysis of complex matrices such as urine, plant extracts, wine and serum. The latter will be used to propose a novel approach to the quantitative analysis of anti-convulsants in serum using hexobarbital as internal standard.     

Theoretical analysis of the radiation effect on the transient behavior of optoelectronic integrated devices

Theoretical analysis of the radiation effect on transient behavior of an optoelectronic integrated device composed of a heterojunction phototransistor and a light emitting diode is studied theoretically. First, the transient behavior and the rise time of this device before radiation are investigated based on the frequency response of the constituent devices and the optical feedback inside the device. Second, the effect of neutron irradiation flux on the transient behavior of this device is theoretically studied. The results show that, by increasing the optical feedback inside the device, the rise time in the amplification mode is increased along with an increasing output, while that in the switching mode can be reduced effectively, and the neutron irradiation reduces the transient response and the rise time in both the amplification and switching modes. This type of model can be exploited as optical amplifier, optical switching device, and other applications.     

A maximum-efficiency-first multi-path route selection strategy for optical burst switching networks

In this paper, the impact of a path selection on other existing paths in optical burst switching (OBS) networks is studied by analyzing the contention among different traffic streams and the interaction between the route selection and traffic load balance. The results show that there exists a mutual reinforcement interaction among the traffic load of a path, the path burst loss ratio and the contention ability of the path when burst loss ratio based multi-path selection strategies are adopted, which may increase the unbalance of traffic and lead to severe congestion further. A maximum-efficiency-first multi-path selection strategy, which considers the performance of the burst flows and the impact of a path selection on existing OBS paths at the same time by a combined metric of route efficiency, is proposed to maximize the utility of the burst flows and minimize the increment of lost throughput on the path. The performance of the proposed multi-path selection strategy is evaluated through simulation. The results show that the presented strategy obviously outperforms the least burst loss ratio strategy and shortest path first strategy in terms of the burst loss ratio in the practical unbalanced background traffic, especially when the network is heavily loaded.     

Temperature-Responsive Electrocatalysis Based on Poly(N-Isopropylacrylamide)-Modified Graphene Oxide (PNIPAm-GO)

Poly(N-isopropylacrylamide)-modified graphene oxide (PNIPAm-GO), which is a type of thermally responsive GO, was designed and synthesized through a covalent “grafting-from” strategy. The as-prepared modified nanosheets integrated the individual advantages of two components, such as the thermal sensitivity of the PNIPAm terminal as well as the conductivity and the open 2D structure of the GO substrate. PNIPAm-GO was able to perform the reversible regulation of hydrophilicity/hydrophobicity in aqueous solution upon variations in the temperature. Such a unique property might also lead to the utilization of PNIPAm-GO as an intelligent electrode material to achieve a switchable electrochemical response toward a [Fe(CN)₆]^3−/4− probe. The PNIPAm-GO modified glassy carbon electrode (PNIPAm-GO/GC electrode) was able to exhibit better electrochemical performance in an ON/OFF switching effect than the PNIPAm-modified glassy carbon electrode (PNIPAm/GC electrode) without GO owing to the intrinsic properties and large surface area of the introduced GO. Moreover, it was found that the PNIPAm-GO/GC electrode also displayed excellent thermally responsive electrocatalysis toward the detection of 1,4-dihydro-β-nicotinamide adenine dinucleotide (NADH) and dopamine (DA), which resulted in two different catalytic statuses on the same electrode. This kind of switchable catalytic performance of the PNIPAm-GO/GC electrode might greatly enhance the flexibility of its application, and thus it is expected to have wide potential for applications in the fields of biosensors and biocatalysis.     

The formation of dead zones in nonisothermal porous catalyst with temperature-dependent diffusion coefficient

This paper considers the formation of dead zones in the porous catalyst pellets due to the chemical reaction and diffusion. We established and investigated the model with nonisothermal reaction of fractional order and activated temperature-dependent diffusivity. The effects of process parameters, catalyst shape, and reaction and diffusion parameters on the formation of the dead zone are studied numerically and characterized by the critical Thiele modulus. The lower bounds for the critical Thiele modulus are derived analytically in terms of process parameters for exothermic and endothermic reactions and verified numerically. The critical Thiele modulus increases with increasing Arrhenius number for diffusion and decreasing Arrhenius number for reaction in the case of exothermic reactions, whereas the opposite trends hold for the endothermic reactions. The critical Thiele modulus also increases with increasing fractional reaction order as well as with decreasing energy generation function, and increasing Biot numbers for heat and mass transfer. Moreover, the critical Thiele modulus is the highest for spherical pellets and the lowest for pellets with planar shape.     

Effect of sweeping voltage and compliance current on bipolar resistive switching and white-light controlled Schottky behavior in epitaxial BaTiO3 (111) thin films

Bipolar resistive switching (RS) phenomenon without required electroforming has been observed in epitaxial (111)-oriented BaTiO₃ (BTO) thin films deposited by PLD technique on conducting Nb-doped substrate of SrTiO₃ (NSTO). Negative differential resistance (NDR) is observed at about −5 V when the maximum of positive voltage exceeds 7 V and the compliance current is more than 1.5 mA. And bipolar resistive switching has also been observed. In addition, the resistance of LRS decreases with increasing compliance current or the maximum of positive voltage while that of HRS barely changes, and the resistance of HRS increases with increasing the absolute of maximum of negative voltage while that of LRS scarcely changes. A typical rectifying behavior is observed when the maximum of positive voltage is less than 4 V (such as 2 V). In this case, the reverse biased current is strongly enhanced under illumination of white-light, and vice versa. The resistance of LRS and HRS can be controlled by the applied voltage or the compliance current. The rectifying behavior can be controlled by the white-light. The transition from rectifying behavior to bipolar resistive switching can be controlled by the applied voltage. The above results were discussed by considering the oxygen vacancies that can trap or release electrons as a trapping layer at the Pt/BTO interface.     

Mesure de l'Anisotropie des Indices de Réfraction des Cristaux Liquides: Interpretation des Différences Observées lors de I'Utilisation des Diverses Méthodes

Les différences observées dans la mesure des indices et des biréfrignences dans les cristaux liquides, lors de l'utilisation de deux séries de méthodes: utilisation de cuve prismatique à longueur d'onde fixe ou de cuves à faces parallèles à longueur d'onde variable sont relevées et confirmées.     

Chain transfer agents in cationic photopolymerization of a bis‐cycloaliphatic epoxide monomer: Kinetic and physical property effects

The effects of chain transfer agents (CTA) on cationic ring‐opening polymerization of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were explored. EEC was polymerized in the presence of various CTAs, and epoxide conversions monitored via Raman spectroscopy. Polymer films were prepared and analyzed by dynamic mechanical analysis. Many of the organic alcohols studied greatly enhanced epoxide polymerization rates and conversion levels. The gel fraction of polymer specimens decreased rapidly with increasing amounts of octanol (gel fraction >90% up to 0.3 equiv OH) but remained high with increasing amounts of 1,2‐propanediol (gel fraction >90% up to 0.6 equiv OH). Increasing the size of primary alcohols had little effect on the polymerization rates and conversions. The polymerization rate decreased with increasing alcohol substitution (1°>2°>3°). Acidic alcohols had very low impact on conversion and polymerization rates relative to the neat epoxy resin. The glass transition temperature was inversely related to the size and amount of CTA. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013