Simultaneous determination of capecitabine and its metabolite 5-fluorouracil by column switching and liquid chromatographic/tandem mass spectrometry

A liquid chromatographic/tandem mass spectrometric method was developed and validated for the quantitation of capecitabine and its metabolite 5-fluorouracil in human plasma. The simultaneous determination of both analytes was achieved by a column switching method using a trapping column and two analytical columns with different stationary phases. Isocratic elution was used for the separation of capecitabine on a C18 column whereas 5-fluorouracil was separated using gradient elution on an non-polar carbon phase. The calibration curves were linear for both compounds with a correlation factor (R2) > 0.9993 for 5-fluorouracil and >0.9942 for capecitabine. The assay was validated in the concentration range 5.00-1000 ng ml(-1) for both compounds. The intra-day precision was better than 10% for 5-fluorouracil and better than 11% for capecitabine whereas the inter-day precision was better than 8% for 5-fluorouracil and better than 14% for capecitabine.     

General analysis of the measurements of the lateral crystal lattice moduli of semicrystalline polymers by x-ray diffraction and the application to nylon 6

A mathematical representation based on a linear elastic theory is proposed by which one may investigate the dependences of molecular orientation and crystallinity on the crystal lattice moduli and linear thermal expansion coefficients in the direction perpendicular to the chain axis as commonly measured by x-ray diffraction. In the theoretical calculation, a previously introduced model was employed in which oriented crystalline phase is surrounded by oriented amorphous phase and the strains of the two phases at the boundary are identical. The mathematical analysis indicated that the lateral crystal lattice moduli and linear thermal coefficients as measured by x-ray diffraction may be different from the intrinsic crystal moduli and linear thermal coefficients of a crystal unit cell, depending on the structure of the polymer solid. The numerical calculation was applied to nylon 6. As a result, it may be confirmed that the lateral crystal lattice moduli measured by x-ray diffraction are sensitive to the morphology of the bulk speciments and close to the intrinsic crystal moduli if the morphology of the test specimen can be represented by a parallel model with respect to the original stretching longitudinal direction.     

Swelling behavior and mechanical properties of endlinked poly (dimethylsiloxane) networks and randomly crosslinked polyisoprene networks

Measurements of the equilibrium degree of swelling and of the equilibrium modulus were performed on poly(dimethylsiloxane) networks (PDMS) and on polyisoprene vulcanizates. The results support the concept that topological interactions between network chains, e.g. entanglements or the like, have a large influence on the rubber elastic behavior, at least within a certain range of network densities.PDMS networks having network chains of different lengths and varying functionlities of the crosslinks were prepared in bulk by endlinking fractionated ,-divinyl PDMS via multifunctional hydrogen-siloxanes (f=3 to 22). Natural rubber (NR) and synthetic liquid polyisoprene (IR) were cured in bulk with various amounts of dicumyl peroxide to give randomly crosslinked samples.The experimentally determined moduli and degrees of swelling were compared with theoretical predictions based on the phantom network theory and affine network theory, taking into account only chemical crosslinks. The observed discrepancies can be traced back to a contribution of topological interactions (trapped entanglements) to the total effective network density. The modulus and swelling data are consistent, thus ruling out non-equilibrium effects.     

An automated analyzer for vancomycin in plasma samples by column-switching high-performance liquid chromatography with UV detection

An automated analyzer for vancomycin in rat plasma by column-switching high-performance liquid chromatography (HPLC) with UV detection was developed. The method includes in-line extraction of vancomycin by ion-exchange cartridge column and a separation on a reversed-phase column with UV detection at 215 nm. Plasma samples were diluted by mobile phase solution and directly injected to HPLC. Vancomycin was quantitatively recovered from rat plasma samples. The separation was completed within 15 min. The calibration curve was linear over the range from 0.5 to 100 microg/mL with the detection and quantification limits of 0.5 microg/mL (2.5 ng on column; signal-to-noise ratio = 3). The values of precision in intra- and inter-day assays (n = 3) were less than 1.92 and 3.69%, respectively. This method does not require time-consuming pre-treatment and is suitable for the routine assay of plasma samples.     

Optical Switching in VO2 Thin Films

Vanadium dioxide thin films have been deposited from vanadium alkoxides VO(OR)3. An amorphous film is formed that transforms into crystalline VO2 upon heating at 500°C under a reducing atmosphere. Optically transparent VO2 thin films are then obtained that exhibit both electrical and optical switching around 70°C. The switching temperature together with the shape of the hysteresis loop can be modified by doping VO2 films with foreign cations. Doped MxVO2 (M = W6+, Nb5+, Ti4+, Cr3+ or Al3+) thin films have been prepared under the same conditions by mixing the vanadium alkoxide and a metal salt in an alcoholic solution. The switching temperature decreases when the film is doped with high-valent cations (W6+) and increases with low-valent cations (Al3+, Cr3+). The transition temperature first decreases and then increases when TiIV is added to the VO2 film while the width of the hysteresis loop is significantly reduced.     

Computer-aided selection and optimization of chromatographic columns and conditions for multicolumn analysis procedures

Clearly, the usefulness of a computer-aided column design program will depend on its ability to predict quickly and accurately, a design which will yield chromatograms closely approximating those obtained experimentally. Such a computer model for designing and specifying operating conditions for optimum performance of either single or serially coupled columns with different stationary phases is described herein. Tests have been performed in order to verify the accuracy of the model. In addition to single column optimization and the design of column combinations which can be used to achieve separations difficult or impossible on a single phase alone, the model has proven quite useful as an aid to the design and development of multicolumn analysis procedures that involve critical timing of valve-switching sequences.     

一种基于门限的光突发交换受限偏射路由算法

提出了一种基于突发丢失门限的条件偏射路由算法（LDFD），该算法采用丢弃少量偏射的高优先级突发来保证偏射路由上较低优先级非偏射突发的服务质量（QoS）。当偏射的高优先级突发到达核心节点而该节点没有空闲数据信道时，就启用定义的偏射条件检测函数来判断是丢弃该突发还是允许其抢占非偏射的低优先级突发的资源，从而减少偏射突发与偏射路由上原有突发的竞争。仿真表明，该算法可以很好地控制偏射突发对偏射路由上正常流量的影响，并有效地提高整个网络的突发丢失性能。     

一种相位开关型分频器电路的噪声分析

介绍了一种相位开关型分频器电路的噪声分析方法。这种方法基于频率综合器的频域模型,能比较准确地预测分频器的相位噪声和它对整个频率综合器相位噪声的影响。分频器电路采用0.18μm CM O S工艺设计,用于W CDM A通讯系统中。在分析过程中,针对此电路的相位开关结构,提出了一些改进其噪声性能的方法。最后用仿真结果进行分析验证,仿真结果和理论相符合。     

光分组交换中的波长变换器配置研究

首先对波长变换器的功能及分类进行详细的论述,然后,对波长变换器的配置进行分析,总结出两种波长变换器配置方法,即独占式配置方法和共享式配置方法.针对独占式配置方法,本文使用仿真实验的方法研究了在不同类型的波长变换器下交换节点丢包性能的差异.本文还对独占式配置方法和共享式配置方法进行对比研究.     

三值双传输管电路的通用综合方法

提出采用双传管逻辑设计三值电路的方法,对每个MOS管的逻辑功能均采用传输运算予以表示以实现有效综合.建立了三值双传输管电路的反演法则和对偶法则.新提出的三值双传输管逻辑电路具有完全基于标准CMOS工艺,无需对MOS管作任何阈值调整,结构简单、规则,输入信号负载对称性好,逻辑摆幅完整以及无直流功耗等特点.采用TSMC 0.25μm工艺参数和最高电压为3V的HSPICE模拟结果验证了所提出综合方法的正确性.