IGBT芯片静态输出曲线连续测量方法

绝缘栅双极型晶体管(IGBT)芯片的静态输出曲线是考核其能量损耗及指导多芯片并联设计的重要指标之一。现有测量IGBT静态输出曲线的方法多采用商用化的功率器件分析仪,然而商业化功率器件分析仪存在价格昂贵、夹具单一的问题。亟需开发一种简单、快速、有效的静态输出曲线测量方法。面向高压IGBT芯片,提出一种新的静态输出曲线连续测量方法及测试电路,有效减小了IGBT芯片的电导调制效应和温升效应对静态输出曲线的影响。通过实时测量动态过程中的电压及电流,可以快速得到IGBT芯片静态输出曲线。通过对比本文连续法与功率器件分析仪的测量结果,证明了所提方法的有效性。     

基于峰宽修正的玻璃药瓶内氧气残留浓度的检测研究

玻璃药瓶中的氧气残留对瓶中药品的无菌特性造成了严重的威胁。采用波长调制光谱（Wavelength Modulated Spectrum, WMS）技术解调得到的二次谐波信号峰高值作为氧浓度反演的基础。然而,在用二次谐波信号测量气体浓度时,由于调制深度的变化会导致二次谐波峰值的变化,这通常会给系统带来误差,进而降低浓度的反演精度。而调制深度受调制电流波动、温度和压强变化等因素的影响不能直接计算获得进而修正。针对这一问题,本文成功地将调制深度与二次谐波峰高的关系转换为二次谐波峰宽和峰高的关系。然后,利用峰宽校正后的谐波峰高对气体浓度进行反演。初步实验表明,利用峰宽校正后的谐波峰高对瓶内气体浓度进行预测的准确性提高了2.1%,且系统的整体鲁棒性也得以提升。本文提出的校正方法不需要系统参数信息与气体成分信息,可以直接从谐波信号本身出发对调制深度进行校正,十分适合于工业现场的在线氧气浓度预测。     

相位调制微波光传输链路特性分析（特邀）

常规的微波光子系统采用强度调制方式实现微波信号的电光转换,由于调制器采用马赫-曾德尔干涉结构(MZI),系统性能不仅受到自身正弦响应特性的制约,而且需要进行偏置点控制,因此存在动态范围受限、系统控制复杂以及3 dB固有损耗带来的效率不足的问题,而采用相位调制可避免该问题。围绕相位调制光传输链路,为了完成相位调制信号的光电解调,文章提出采用薄膜滤波器通过边带抑制与边带选通两种方式实现相位调制到强度调制的转换,并分析了链路射频性能与器件参数之间的映射关系。实测对比了相位调制与常规强度调制链路之间的传输特性,通过分析可知,在相同链路配置条件下,相位调制链路具有更高的传输效率,而且光滤波带来的均衡作用,使得相位调制链路的3 dB带宽比强度调制链路大两倍。     

一种面向RDSM系统的基于遗传算法优化色散矩阵的方法

矩形差分空间调制（rectangular differential spatial modulation,RDSM）是一种多天线非相干调制技术,该技术频谱效率高,低功耗且无信道估计开销,特别适用于信道快速变化的车联网、物联网、6G蜂窝网络等未来通信系统。然而发射端的稀疏酉矩形空时色散矩阵（dispersion matrix,DM）的构造问题一直是个难点,而当前使用的随机搜索优化方法具有极高的计算复杂度,对此,提出了一种低复杂度遗传算法（genetic algorithm, GA）。根据秩与行列式标准最大化准则（rank and determinant criterion,RDC）的方法计算适应度值,可避免差分系统中所需的分类讨论。根据星座旋转对称性的特点,降低 GA 单次迭代的计算复杂度。仿真结果表明,优化得到的DMs（DM set）显著改善了RDSM系统误比特率（bit error rate,BER）性能,对比随机搜索,低复杂度遗传算法有效提高了RDSMS的DMs优化效率,优化DMs所需的计算复杂度约为随机搜索的0.1%。     

高速移动通信系统中OTFS分数多普勒信道估计加窗研究

针对正交时频空间(OTFS)调制系统中分数多普勒信道对应的物理路径信道状态信息估计困难及计算复杂度较高等问题,该文提出一种节省导频资源的脉冲匹配滤波(PRS-PMF)信道估计算法。该算法首先使用数据与导频联合成帧的嵌入式辅助导频方法获得等效信道的估计,然后通过互相关匹配滤波估计出各路径信道状态信息,相比于传统的脉冲导频互相关匹配滤波信道估计算法,能够在降低计算复杂度的同时减少导频资源的占用。在此基础上,对OTFS系统加窗,减少窗口响应主瓣的整数样点数量并降低旁瓣电平,有效改善了等效信道多普勒响应函数的自相关特性,从而降低了其他符号及噪声对估计符号的干扰。     

Simultaneous wireless information and power transfer with fixed and adaptive modulation

Activating Wireless Power Transfer (WPT) in Radio-Frequency (RF) to provide on-demand energy supply to widely deployed Internet of Everything devices is a key to the next-generation energy self-sustainable 6G network. However, Simultaneous Wireless Information and Power Transfer (SWIPT) in the same RF bands is challenging. The majority of previous studies compared SWIPT performance to Gaussian signaling with an infinite alphabet, which is impossible to implement in any realistic communication system. In contrast, we study the SWIPT system in a well-known Nakagami-m wireless fading channel using practical modulation techniques with finite alphabet. The attainable rate-energy-reliability tradeoff and the corresponding rationale are revealed for fixed modulation schemes. Furthermore, an adaptive modulation-based transceiver is provided for further expanding the attainable rate-energy-reliability region based on various SWIPT performances of different modulation schemes. The modulation switching thresholds and transmit power allocation at the SWIPT transmitter and the power splitting ratios at the SWIPT receiver are jointly optimized to maximize the attainable spectrum efficiency of wireless information transfer while satisfying the WPT requirement and the instantaneous and average BER constraints. Numerical results demonstrate the SWIPT performance of various fixed modulation schemes in different fading conditions. The advantage of the adaptive modulation-based SWIPT transceiver is validated.     

某通信设备激励模块自检偶发报故的分析与解决措施

简单介绍了某通信设备激励模块工作原理,针对某批次激励模块自检偶发报故的问题,通过对故障原因的详细分析,发现采样时间与指示信号有效时间临界的问题。提出了在充分考虑指示信号有效时间范围的前提下,找到最佳采样时间段,对软件采样时间的设计进行优化的解决措施。     

正交多载波降噪差分混沌键控通信系统

为解决多载波差分混沌移位键控(MC-DCSK)系统传输速率低和误码性能差的缺点,该文提出一种正交多载波降噪差分混沌移位键控(QMC-NR-DCSK)系统。在发送端,预定义载波用于发送参考信号,剩余M-1个不同中心频率的载波及其经正交调制技术后得到的频率相同但相位正交的载波都用于传输信息信号,此外,通过进一步引入Hilbert变换,将系统的频带利用率和传输速率提升为MC-DCSK系统的4倍。在接收端引入滑动平均滤波器的降噪操作降低了噪声的方差,从而改善了系统误码性能。推导了QMC-NR-DCSK系统在加性高斯白噪声(AWGN)信道和多径瑞利衰落(RFC)信道下的比特误码率公式并进行了仿真。仿真结果和理论分析表明：QMC-NR-DCSK系统能有效提升传输速率、带宽效率和误码性能,为该系统应用于多载波无线通信提供理论参考。     

Microwave-assisted Preparation of Temperature Sensitive Poly（N-isopropylacrylamide） Hydrogel with Improved Responsive Properties

Poly(N-isopropylacrylamide) (PNIPAM) hydrogel, which is insoluble but shrinkable or swellable in aqueous media when temperature rises or drops across 33oC1,2, has been extensively studied due to its potential applications in the fields of controlled drug …     

Study of process parameters for starch,gluten, and glycerol mixtures

This work involved a study of the effect of processing variables (temperature, water content, rotor speed, and time) on the mechanical properties of starch:gluten:glycerol mixtures in the weight ratio of 40:40:20. The properties of the materials were affected by the processing variables. The torque decreased with water content, indicating that water facilitates the plasticization of mixtures, whereas the increase in temperature accelerated the evaporation of water, thus increasing the torque. Ultimate tensile strength was achieved at the lowest temperature (110°C) and the highest water content (20%), whereas maximum elongation was achieved for the material processed at the highest temperature, 150°C, and the fastest rotor speed, 70 rpm. Copyright © 2007 John Wiley & Sons, Ltd.